WordPerfect 5.0 Printer Drivers ------------------------------- This directory contains printer drivers for the Kodak Diconix 150 Plus, 150, and 300/300W printers. Their filenames are as follows: DI150.PRS Diconix 150 DI15SPFI.PRS Diconix 150 (Space Fill) DI150PLU.PRS Diconix 150 Plus DICO300W.PRS Diconix 300/300W The Diconix 150 (Space Fill) driver is a slightly different version of the standard Diconix 150 driver. With WordPerfect's Prestige 9 font, it uses text spacing instead of graphics to produce slightly faster output, but at the expense of some precision in text right-justification. Installation ------------ WordPerfect allows each user to specify the sub-directory in which printer drivers are stored. To determine your printer files directory: 1) Enter WordPerfect's SETUP mode ([Shift-F1]). 2) Select option 7 ("Location of Auxiliary Files"). 3) The directory in which your printer drivers are located is displayed opposite option 5. If nothing is shown, the default location is the directory in which your WordPerfect software is installed (probably C:\WP50). 4) Press [F7] to exit SETUP mode. Next, use the DOS COPY command to copy the desired driver(s) from this disk to your WordPerfect printer files directory identified above. (Example: COPY A:\WP50\DI150PLU.PRS C:\WP50) Finally, install the printer driver(s) in WordPerfect: 1) Go to WordPerfect's Print menu ([Shift-F7]) 2) Select Option S ("Select Printer") 3) Select Option 2 ("Additional Printers") 4) Select Option 4 ("List Printer Files") 5) Use the cursor keys to highlight the desired printer driver file (e.g. DI150PLU.PRS) and press [Enter]. 6) Continue with the printer installation as described in your WordPerfect Manual, choosing the appropriate port, initial font, etc.. Pay special attention to suggested DIP switch settings. Repeat this process to install additional printer drivers.