Microsoft Windows 3.x Printer Drivers
-----------------------------------------------------

This directory contains printer drivers for the Kodak Diconix 701, 180si
150 Plus, 150 300/300w and Color 4 printers.  Each driver consists of 
two separate files (GENDRV.DLL and either D701.DRV, D180SI.DRV, D150P.DRV, 
D150.DRV, D300W.DRV or DICONIX4.DRV). When using Windows 2.x, both files 
must reside in the Windows System directory with any other printer drivers 
already installed.

Microsoft Windows 3.0 Installation:
-----------------------------------

     NOTE: The files in the directory "WIN2" are for Windows 2.X support only.

1)   Start up Windows, and run the program "Control Panel".

2)   Select "Printers" from the "Control Panel" window.

3)   Select "Add Printer>>" from the "Printers" window.

4)   Select the item called "Unlisted Printer" from the "List of Printers"
     list, then select "Install...". Windows will now want to know what drive
     and/or directory the KODAK DICONIX 701, 180si, 300/300w 150, 150 Plus or 
	Color 4 driver is on. ( i.e. A:\WINDOWS )

5)   Select "Configure..." from the "Printers" window to connect the
     printer to a port.

6)   Panel A DIP Switch Settings:

          Diconix 180si       No setup changes needed.

          Diconix 701         No setup changes needed.

          Diconix 150 Plus    Switch #3 UP, all others DOWN.

          Diconix 150         All switches DOWN.

          Diconix Color 4     No switches need to be changed.

          Diconix 300/300w    All switches DOWN.

The printers are now ready for use under Microsoft Windows.