E&a8L(s12h12v3b6THP DeskJet 1200C Application Note
&d4Dfor Harvard(tm) Graphics Ver. 3.0(s0B&d@

Use the installation utility contained on the "HP DeskJet 1200C Driver
Disk for DOS", to copy the necessary files to the ...\HG3\DRIVER directory
on your hard disk.

(s3B&d1DSetting Up Harvard(tm) Graphics(s0B&d@
 1. Start the Harvard(tm) Graphics program. 
 2. From the F6-Main Menu, press 8 (Setup).
 3. Press 5 (Printer 1).
 4. From the Printer 1 Setup Menu press F3 (Choices).
 5. Use the down arrow key to highlight one of the DeskJet 1200C drivers,
    then press <Enter>.
 6. Press the down arrow key to position the cursor across from "Output Port".
 7. Press F3 (Choices).
 8. Use the arrow keys to select the port where your printer is connected,
    then press <Enter>.
 9. Press the down arrow key to position the cursor across from "Default paper
    size", then press F3 (Choices).
10. Use the arrow keys to select the correct paper size, then press <Enter>.
11. Use the arrow keys to position the cursor across from "Use spooler".
12. Press F3 (Choices), and select "Yes".
    NOTE: Setting "Use spooler" to "Yes" activates the integral spooler and 
    allows you to get back to Harvard Graphics sooner when printing.  With it
    set to "No", you'll have to wait until the print job is nearly finished in
    order to continue working.  If you do not wish to use the integral spooler,
    (for example, when using an external hardware or software spooler) set "Use
    spooler" to "No".
13. Use the arrow keys to position the cursor across from "Quality".
14. Press F3 (Choices).
15. Select one of the following "Quality" options, then press <Enter>.
     High:     Presentation/best quality. 
     Medium:   Normal/medium quality (faster printing than "High").
     Draft:    Use to "proof" your work before printing a final copy.
16. Press <Enter>.
17. Press 1 (Program Defaults).
18. Using the arrow keys, move the cursor down to the bottom of the screen
    across from "Max. spooler size (K):".
19. Type 3072 as the spooler size, then press <Enter>.
    NOTE: This sets the spooler size to approximately 3Mb.  Since Harvard
    Graphics creates this 3Mb file on your hard disk, make sure that you have
    enough disk space to accommodate it.  Lowering the spooler size will
    increase the time it will take to free up your PC while printing.  If you
    are using an external spooler (hardware or software solution), set the
    "Use spooler" option to "No" in the Printer Setup Menus.
20. Press the Esc key.

(s3B&d1DPrinting from Harvard(tm) Graphics 3.0(s0B&d@
 1. From the F6-Main Menu press 5 (Output).
 2. Press 1 (Printer 1).
 3. Check to see if all of the printing information is correct, then press
    F10-Continue to print.
     
(s3B&d1DMiscellaneous Notes(s0B&d@
If white colored areas of your chart are printed black (reversed B&W), you
may need to make the following change to your printer setup configuration;
 1. From the F6-Main Menu press 8 (Setup).
 2. Press 5 (Printer 1).
 3. From the Printer 1 Setup Menu select F8 (Options).
 4. From the Printer Options menu set "Reverse black and white" to "No".

E