E&a8L(s12h12v3b6THP DeskJet 1200C Application Note
&d4Dfor Freelance Plus Ver. 4.0(s0B&d@


(s3B&d1DSetting Up Freelance Plus(s0B&d@
1. In order for Freelance Plus to know which disk drive it will
   receive driver files from, NEWDRIVE.EXE must first be run from
   this utility disk with the path for Freelance Plus. Exit this utility and type,
   for example, NEWDRIVE C:\FL.
2. Start the Freelance Plus program.
3. Select "Device and Font Setup" from the main menu.
4. Select "Install-devices" from the next set of selections.
5. Cursor down to the device number where the printer is to be
   installed and press the space bar on the keyboard to list the 
   available selections.
6. Cursor through the list until "HP DeskJet 1200C" is highlighted
   and press <Enter> to select.
7. Cursor down to the "Done" selection and press <Enter>.
8. Select "Yes" when asked to confirm device changes shown and 
   press <Enter>.
9. When asked to insert the "DJ-1200C disk", insert the utility disk in
   the corresponding drive and press <Enter>. The drive letter can be
   changed if necessary.
10. Quit the Setup portion of the program.
11. Select "Charts and Drawings" from the main menu.
12. Select "Print" and then "Options" in the menu.
13. With the cursor on the current device, press the space bar to display
    the available devices.
14. Move the cursor bar up or down until "HP DeskJet 1200C" is highlighted.
15. Press enter to accept.
16. Press F10 to exit.

Note: Additional printer memory (above the factory installed 
2mb) may be required to sucessfully print files with large 
or numerous TIFFs, or files with several different fonts. 
If the file does not print completely, try rescaling the 
TIFFs to a smaller size, or using fewer fonts or attributes 
(shadow, underline, etc.) for the fonts.

E