Release notes for the Canon BJ-Series GEM/3 Driver
==================================================

Introduction
------------

The supported printers in the Canon BJ-Series are the BJ-10e, BJ-10ex, BJ-300
and BJ-330.  The BJ-10ex, the BJ-300 and the BJ-330 can work in two modes, IBM 
Proprinter mode and Epson LQ mode. Dip switches must be set to select one
of these modes and details of how to do this are in the User Manual. The
BJ-10e can only operate in IBM Proprinter mode.

There are three printer drivers on the disk :

    Canon BJ180E	Canon BJ Series Epson LQ 180 x 180 dpi driver
    Canon BJ180P        Canon BJ Series IBM Proprinter 180 x 180 dpi driver
    Canon BJ360P        Canon BJ Series IBM Proprinter 360 x 360 dpi driver

Installation
------------

To install the driver you use the standard GEMSETUP utility on your GEM
system disc. Use the utility to add a printer as normal. When you are asked
to choose the printer to install, select the option "Other (driver pack)".
Insert the driver disc into your floppy drive when asked to do so. When the
printer menu is redisplayed, select the new option for the driver :

    Canon BJ Series Epson LQ	  180 x 180 dpi driver
	       OR
    Canon BJ Series IBM Proprinter 180 x 180 dpi driver
	       OR
    Canon BJ Series IBM Proprinter 360 x 360 dpi driver

When you select the "save and exit" option, GEMSETUP will install the driver for you.

You can select two or even three of the Canon BJ printer drivers but you
must ensure that your printer's dip switches are set correctly.


Use
---

To use your BJ printer with GEM, select the the appropriate driver ( "Canon
BJ180E", "Canon BJ180P" or "Canon BJ360P") in OUTPUT.

Remember to set the paper size in OUTPUT.