32-Bits PCI Bus (fast) Ethernet Adapter
 NDIS/3 DRIVER FOR WINDOWS FOR WORKGROUPS 3.11 INSTALLATION
 ==========================================================


  Content:
  --------

A) Install NDIS 3.0 driver to the WFW 3.11
    The drivers named ETHPCI.386 contained in the directory
    WFW311.


    NDIS Driver Installation on Windows for Workgroups 3.11
    -------------------------------------------------------

    1. Run Windows by typing WIN from the DOS prompt.
    2. Click the "Network" icon in the Main Program
       Group.
    3. Click the "Network Setup" icon from the Network window.
    4. Select "Drivers" item from the Network Setup dialog box.
    5. Select "Add Adapters" item in the Option dialog box.
    6. Select "Unlisted or Updated Network Adapter" when the
       Install driver field appears.
    7. Type destination drive and path name in your PC.
       Make sure the full path of the directory (i.e. A:\WFW311)
       is given.
    8. Insert the Driver Diskette in your floppy drive
       and press <Enter> to start the installation process.

    9. When the "32-Bits PCI bus (fast) Ethernet Adapter Driver"
       dialog box appear.  Select the installed adapter from the two
       adapters:                      
                    32-Bits 10Mbps PCI Ethernet adapter
                    32-Bits 100Mbps PCI Fast Ethernet adapter

    10.Follow screen instructions to complete the process.

    11.Restart your computer.


B) Setup 32-Bits PCI bus (fast) Ethernet Adapter on WFW311
    There are 4 parameters can be set in driver installation & reconfiguration

    1. Burst Length : 1 dword, 2 dwords, 4 dwords, 8 dwords, 16 dwords,
                      32 dwords.
                      default value is 16 dwords (= 4 bytes)

    2. Bus Number   : 0, 1, 2  --> you PCI-BUS no.
                      default value is 0.

    3. Pci Mechanism: AutoDetect, Mechanism 1, Mechanism 2.
                      default value is AutoDetect.

    4. Connection Type: default is Auto Detection.

       The connection types for Ethernet adapter are

        Auto Detection                     ; perform automatically media
                                           ; detection during driver
                                           ; initialization.

        Twisted Pair                       ; RJ-45 connector.

        Twisted Pair - Full Duplex         ; communication in full duplex mode,
                                           ; speed is 20Mbps

        Twisted Pair - No Link Test        ; support Hub which dose not generate 
                                           ; link pulses

        BNC - Thinwire  (BNC connector)    ; 10BASE2 connector.
        AUI - Thickwire (15_pin connector) ; 10BASE5 connector, this version of 
                                           ; current board dose not support the
                                           ; medium.
       

       The connection types for Fastnet adapter are

        Auto Detection                     ; perform automatically media 
                                           ; detection during driver 
                                           ; initialization.

        TP  10 Mbps                        ; RJ-45 connector, line speed is
                                           ; 10 Mega bits per second.

        TP  10 Mbps - Full Duplex          ; communication in full duplex mode,
                                           ; speed is 20Mbps.

        BNC 10 Mbps                        ; 10BASE2 connector.

        TP 100 Mbps                        ; RJ-45 connector, line speed is
                                           ; 100 Mega bits per second.

        TP 100 Mbps - Full Duplex          ; communication in full duplex mode,
                                           ; speed is 200Mbps.


    Sample Configuration Files
    --------------------------

    1. CONFIG.SYS File
       FILES=30
       BUFFERS=30
       LASTDRIVE=Z
       DEVICE=C:\WFW311\HIMEM.SYS
       DEVICE=C:\WFW311\IFSHLP.SYS
       STACKS=9,256

    2. AUTOEXEC.BAT File

       C:\WFW311\SMARTDRV.EXE
       C:\WFW311\net start
       PATH C:\WFW311;
       SET TEMP=C:\WFW311\TEMP

    3. SYSTEM.INI

       [386Enh]
       netcard=ethpci.386

===End===