Installing The NDIS 3.0 Driver ------------------------------ Installation of NE100TX-E PCI Fast Ethernet Card's driver for specific environment is described below. Microsoft Windows NT -------------------- Note: ----- 1) The directory structure provided on the NE100TX-E PCI Fast Ethernet Card's driver diskette has been setup for automatic OEM installation. Also, more information can be found in the Microsoft Windows NT User's Guide. 2) Only x86-based Windows NT platforms are supported. 3) For Windows NT 3.5 & 3.51 installation, specify the driver source path to the following : \WINNT\NT35 4) For Windows NT 4.0 installation, specify the driver source path to the following : \WINNT\NT40 Follow the steps listed below: ------------------------------ For NT35 & NT351 1 Insert the NE100TX-E PCI Fast Ethernet Card's driver diskette into the floppy drive. 2 From the "Control Panel" in the "Windows NT Main" window, double click on the "Network" icon to install the NE100TX-E PCI Fast Ethernet Card. 3 In the "Network Settings" dialog box, choose "Add Adapter". 4 In the "Add Network Adapter" dialog box, pull down the adapter card list menu and select " Requires disk from manufacturer" from the list and continue. 5 In the next window, enter: A:\WINNT\NT35 6 Then, select "NE100TX-E PCI Fast Ethernet Adapter" from the dialog box to install the NE100TX-E PCI Fast Ethernet Card. 8 Reboot your system to complete the driver installation process. For NT40 1. Double click "Network" icon in "Control Panel". 2. Select "Adapter" from "Network" box. 3. Click "Add" and select "Have Disk". 4. Specify driver path as "A:\WINNT\NT40" and press OK. 5. It will show "NE100TX-E PCI Fast Ethernet Adapter". 6. Press Ok and follow on-screen indtructions to complete. -------------------------------------[END]--------------------------------------