Microsoft Windows for Workgroups 3.1
------------------------------------

Follow the steps listed below:
------------------------------

1       Insert the NE100TX-E PCI Fast Ethernet Card's driver diskette in the 
        floppy drive.

2       From the "Main" group in Windows, select the "Control Panel" icon.

3       In the "Network Settings" dialog box, select the "Adapters" button.
        The "Network Adapters" dialog box should appear.

4       Choose the "Add" button to install the NDIS driver from the NE100TX-E 
        PCI FastEthernet Card's driver diskette.

5       In the list of network adapters, select the "Unlisted or Updated Network
        Adapter". Then enter the path to load the NDIS 2.01 driver (e.g.,"A:\NDIS.DOS").

7       Select the "NE100TX-E PCI Fast Ethernet Adapter" and choose "OK".

8       In the "Network Adapters" dialog box, choose the "Close" button. Then

        choose the "OK" button in the "Network Settings" dialog box.

9       Follow the remaining Window instructions. Restart the computer to have
        the driver take effect.


Microsoft Windows for Workgroups 3.1
------------------------------------

 This NDIS2 driver also support Windows for Workgroup 3.11.

1. Double "Network Setup" icon in "Network" group.

2. Click the "Drivers" button, then clcik the "Add adapter" button.

3. Selct "Ulisted or updated Network Adapter" and press OK.

4. Specify the pathname as "A:\NDIS.DOS" and press OK.

5. It will show "NE100TX-E PCI Fast Ethernet Adapter".

6. Press OK and follow on-screen instructions to complete the installation.   
-------------------------------------[END]--------------------------------------