Microsoft Windows NT 3.5 / 3.51
-------------------------------

Note:
  (1) The directory structure provided on the NDIS 3.0 driver diskette has been
      setup for automatic OEM installation. Also, more information can be found
      in the Microsoft Windows NT User's Guide.

  (2) Only x86-based Windows NT platforms are supported.


Follow the steps listed below:

   1    Insert the NDIS 3.0 driver diskette into the floppy drive.

   2    From the "Control Panel" in the "Windows NT Main" window, double
        click on the "Network" icon to install the 10/100 Auto PCI Fast
        Ethernet Adapter.

   3    In the "Network Settings" dialog box, choose "Add Adapter".

   4    In the "Add Network Adapter" dialog box, pull down the adapter card list
        menu and select "<Other> Requires disk from manufacturer" from the list
        and continue.

   5    In the next window, enter:

              A:\WINNT\NT35  or  A:\WINNT\NT351

   6    Then, select "NDC 10/100 Auto PCI Fast Ethernet Adapter" from the dialog
        box to install the 10/100 Auto PCI Fast Ethernet Adapter.

   7    In the NDC Ne100tx Adapter Setup dialog box, select "AUTOSENSE" then
        click "OK" to start copy the NDIS 3.0 driver to your Windows NT system.

   7    Reboot your system to complete the driver installation process.

For additional information, please refer to your Microsoft Windows NT OS
documentation.


Microsoft Windows NT 4.0
-------------------------

Note: For the installation procedure on NT40, please refer to README.TXT
      file under \WINNT\NT40 directory.

-------------------------------------[END]--------------------------------------