ÿMKMSGFEN02ƒ†‘œ ¤È‘Î:T˜°äPÛBVh‹ÀËÖG‚½è@l«ðC¹¼Þü1[”Õ I “ ? ISocket A ISocket B IY IC IRing Speed Configured for %1 Mbps IToken Ring 16/4 Credit Card Connectivity Enabler Version %1 IWARNING! The entire ring will be disrupted if the Token-Ring adapter ring speed does not match the speed of the existing ring. IThe Token-Ring Credit card is ready to attach to the ring. IIt is configured for a ring speed of %1 Mbps. Enter 'Y' if this is correct. IIncorrect memory parameters IIncorrect IRQ parameter IIf you would like to change the configured ring speed to %1 Mbps, Ienter 'C' for change. ICHANGING the ring speed configuration to %1 Mbps. ICard Services is installed on this machine. Please remove Card Services and reboot the system. EThe credit card inserted is not recognized as a Token-Ring Credit Card. Please insert the correct card and reboot the system. IRing Speed configuration will REMAIN at %1 Mbps. ESocket Services is NOT installed on this machine. IAlternate Adapter IPrimary Adapter EImproper Socket Services Version INo Credit Card Adapter is installed in the socket. ISocket C ISocket D IPOINTTR.EXE [SA/SB/SC/SD] [RS=16/RS=4] [PROMPT] [MMIO=XXXX] I [PRI/ALT] [IRQ=X] [SRAM=XXXX,Y[Y]] I [WS=0,1,2,3,4] [DS=16/DS=8] [PCIC=XXXX] [?] ISA/SB/SC/SD - Socket A, Socket B, Socket C, or Socket D IRS - Ring Speed (16 or 4 MBPS) IPROMPT - Prompt for ring speed selection IMMIO - Memory Mapped Address IPRI/ALT - Primary/ Alternate adapter IIRQ - Interrupt Level (PCMCIA controller interrupt) ISRAM - Shared Ram address [XXXX] and size [Y[Y]] in kbytes IWS - Wait state selection IDS - Data size (16 or 8 bit bus) IPCIC - PC Card Interface Controller base I/O port I? - Display available parameters for enabler I Inote: X is a hexadecimal number I Y is a decimal number ITOSHTR.EXE [RS=16/RS=4] [PROMPT] [MMIO=XXXX] [?] I [PRI/ALT] [SRAM=XXXX,Y[Y]] IPOINTDB.EXE [S0/S1] [RS=16/RS=4] [PROMPT] [MMIO=XXXX] I [WS=0,1,2,3,4,5,6,7] [DS=16/DS=8] [TCIC=XXXX] [?] IS0/S1 - Socket 0 (top), Socket 1 (bottom) ITCIC - PC Card Interface Controller base I/O base port ITOKENRNG.EXE [SA/SB] [RS=16/RS=4] [PROMPT] [MMIO=XXXX] [?] [DS=16/DS=8] ISA/SB - Socket A or Socket B