81
0,   Invalid
1,   parameter ignored
2,   Warning
3,   ERROR
4,   No Auto 16/4 ISA Adapters found in this computer. \x0d Or adapter's ROM segment conflict.
5,   IO address
6,   interrupt level
7,   ROM address                                                                
8,   RAM address
9,   ITEM
10,  Adapter 1
11,  Adapter 2
12,  Failure
13,  !!! Saving Error !!!
14,  Card will be inactive.
15,  Please save resource of setting again.
16,  Setting in conflict
17,  a
18,  a
19,  No valid configuration found. Restoring original configuration.
20,  a
21,  IO address in conflict.
22,  Interrupt level in conflict.
23,  RAM address in conflict.
24,  ROM address in conflict.
25,  8 bit adapter bus width set for 16 bit machine
26,  Bus width in conflict
27,  Save failed. Restoring original configuration
28,  No Help Available
29,  --- Press any key to continue, <ESC> to exit ---
30,  !!! Current Adapter Settings !!!
31,  MAC Address
32,  Enabled
33,  Disabled
34,  PnP Mode
35,  IO Base 
36,  IRQ Level 
37,  RAM Segment 
38,  RAM Size 
39,  ROM Segment 
40,  Remote IPL 
41,  Token-Ring data rate 
42,  Auto Sense data rate 
43,  Adapter bus width 
44,  Primary
45,  Alternate
46,  Setting in conflict
47,  PASS
48,  Diagnostic now
49,  Conflict
50,  Resource Check
51,  Initialize Adapter
52,  Link to Network Testing
53,  Close Adapter
54,  Node Address
55,  Invalid IO address, parameter ignored.
56,  Invalid interrupt level, parameter ignored.
57,  Invalid ROM address, parameter ignored.
58,  Invalid RAM address, parameter ignored.
59,  Invalid RAM Size, parameter ignored.
60,  Diagnostic Report
61,  Invalid Windows directory.
62,  Invalid maximum frame size, parameter ignored.
63,  Invalid Node Address, parameter ignored.
64,  PnP Configuration, parameter ignored.
65,  PnP Mode
66,  PnP Lock Mode
67,  Card State
68,  Active
69,  Inactive
70,  MicroCode Level
71,  Locked
72,  Unlocked
73,  The BIOS level in your machine is
74,  The adapter may have problems at BIOS levels less than
75,  Forcing adapter IRQ to
76,  Forcing adapter I/O to
77,  Forcing adapter ROM to
78,  Forcing adapter RAM to
79,  .... Resource found set to zero
80,  The adapter configuration found was not valid