DRIVERS USAGE EXPLAINATION
                 ==========================

  With this ShineNet utility diskette,you will find the following
files:

                    8834SH.OBJ
                    A8834.OBJ
                    B8834.OBJ
                    C8834.OBJ
                    D8834.OBJ
                    8834.LAN
                    S8834.LAN
                    NBE34.EXE
                    README
                    FTP_TCP  <DIR>
                    V3.1X    <DIR>
                    DOSODI   <DIR>

  The files 8834SH.OBJ.....S8834.LAN are  provided  for  NOVELL
NetWare ver 2.1X and later. Please refer to  the  ShineNet user
manuals and NOVELL NetWare installation manual for details during
installation.

  The files in directory V3.1X support for Netware 386 ver 3.10
and 3.11, please read this file about more information and refer
to NetWare installation manual for details during installation.

  Except for using the driver of ShineNet LCS-8834L, you can also
use the NE2000 as lan driver if you are the user of NOVELL
Netware ver 2.1X or later version.

  NBE34.EXE is NETBIOS emulator; You will need it if you intend to
use the PC LAN or LAN MANAGER.

  The files in FTP_TCP <dir> are Shine Net LAN adapter packet
drivers for FTP's PC/TCP network softwares. The readme file  under
the FTP_TCP <dir>  will direct you the installation details.

  The files in DOSODI <dir> are drivers supporting NOVELL ODI specification.

  If there is any conflict existing between the user manual and
readme files,the readme files shall prevail.


                 NetWare 386 DRIVERS USAGE EXPLAINATION
                 ======================================

I.  For install your NOVELL Netware 386 on your server :

    Please insert your Netware 386 Disk "SYSTEM-1", enter command

                A:SERVER

    Until you get the ":" server console prompt, then insert the DISK
    include the "INSTALL" NLM module and enter

                LOAD d:INSTALL

    for execute install procedure.
    Please refer to NOVELL NetWare 386 Installation Manual for details.

II. Procedure for Load Driver:

    Directory V3.1X contains LCS8834.LAN, an NLM module for  installing
    NetWare 386 version 3.1X file servers, It can also be running on Netware
    V3.10 and V3.11.

    Follow the 386 NetWare  installation  procedure  until  you  get the ":"
    server console prompt.  Enter  commands  listed  below  at  the  prompt  to
    install LAN driver into your server:

                 LOAD d:LCS8834.LAN  <CR>
                 BIND IPX TO LCS8834 <CR>

    The drive letter d: is the physical location where "LCS8834.LAN" is placed.
    You will be prompted to select the proper LAN card configuration after  the
    program is loaded.

    If you want unload the driver from server, please enter :

                UNLOAD LCS8834.LAN

    More clear operation for Netware 386, please refer to your Netware 386
    manual.

III. Generate WorkStation Driver on your Netware 386 :

    S8834.LAN and 8834SH.OBJ files  can  also  be  used  to create NetWare 386
    version 3.x shell without any modification.

    Please copy the file "8834SH.LAN" in this disk, into the Disk "SHGEN-1"
    of NetWare V3.10, or into the Disk "WSGEN" of Netware V3.11 .

    Then execute the file

                SHGEN <CR> (for Netware v3.10) or
                WSGEN <CR> (for Netware v3.11)

    You will be  prompted  to  insert  this  diskette (LAN_DRV_243) during
    create for linking object file 8834SH.OBJ .

    Please refer to NOVELL NetWare 386 Installation Manual for details about
    your WorkStation installation.


* NetWare is a registered trademark of Novell Inc.