October 1995

                         IN-220P Series Ethernet Card
                   UNIXWARE UNIX SVR4.2 Driver Installation
                   ========================================

Copyright (c) 1995 by Infotel Corporation. All rights reserved.

1. login UNIX as "root"
    login: root
    Password: XXXXXX

2.  #doscp a:setup setup
    #chmod +x setup
    #./setup  a: (you can specify another path as you wish)

3.  Install the Driver
    #cd /usr/lib/tcprt/IN220P
    #chmod +x setupIN
    #./setupIN
	Do you wish to install or delete the network driver(i/d/q)?	i

/* first adapter install */
	Do you want to configure Board_0? (y/n/q)  		        y

        Board_0 configuring ...

	Please enter the IP host name for the device d22e_0(default:xx ) XXXX
	Please Initialize the IP Address for host XXXX: 		n.n.n.n
	Configure host XXXX with default Ethernet(TM) ifconfig option?	yes

        Note:
          If the board of IN-220P Series is a non-plug and play card,
          please use setup program in DOS to change I/O base addresss,
          and IRQ number if conflict.

        Please choose the media mode that you want............

         0. Twisted pair connection.
         1. BNC connection.
         2. AUI connection.
         3. Automatic detection between TP BNC and AUI.
         4. Use EEPROM setting.
       
       Enter number of media mode selection (0 1 2 3 4) [3] or 'q' to quit: 0
       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       Media mode : Twisted pair.

/* second adapter install */
	Do you want to configure Board_1? (y/n/q)  		        y

        Board_1 configuring ...

	Please enter the IP host name for the device d22e_1(default:xx ) YYYY
	Please Initialize the IP Address for host YYYY: 		n.n.n.n
	Configure host YYYY with default Ethernet(TM) ifconfig option?	yes

        Note:
          If the board of IN-220P Series is a non-plug and play card,
          please use setup program in DOS to change I/O base addresss,
          and IRQ number if conflict.

        Please choose the media mode that you want............

         0. Twisted pair connection.
         1. BNC connection.
         2. AUI connection.
         3. Automatic detection between TP BNC and AUI.
         4. Use EEPROM setting.
       
       Enter number of media mode selection (0 1 2 3 4) [3] or 'q' to quit: 0
       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       Media mode : Twisted pair.

/* the third adapter */
	Repeat the above steps ....

        0: d22e_0 adapter 0
        1: d22e_1 adapter 1
        2: d22e_2 adapter 2
        3: d22e_3 adapter 3
Select one adapter to support Netware: 0
                                       ~

    Note: After you install IN-220P device driver, you can create a 
          DeskTop user that has 'root' privilege and using the following 
          steps:

                Admin_Tools -> Networking
                            -> NetWare_Setup
                            -> LAN options
                            -> IPX LAN Device 
                               IPX LAN Frame Type 

          IPX LAN Device       Specifying the device driver for the network 
                               board.    

          IPX LAN Frame Type   Specifying the frame type.