旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � ACCTON TECHNOLOGY CORPORATION � � ETHERPOCKET LAN MANAGER DRIVER INSTALLATION GUIDE � � � � 08/19/1993 VERSION 2.11 � � � � Copyright 1989-1993 ACCTON Technology Corporation � � All rights reserved. � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� The drivers contained in this diskette are for the following ACCTON EtherPocket lan adapters: 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � Product Name Product Number � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � EtherPocket-10T EN2201 � � EtherPocket-CX EN2202 � � EtherPocket-Duo EN2209 � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 They are used with 3Com 3+Open, Microsoft OS/2 LAN Manager OEM distribution, Release 1.x or 2.x, and other compatible OEM versions of LAN Manager. The drivers named ETHPOCK conform to the Network Driver Interface Specification (NDIS) defined by Microsoft/3Com. 1. DOS LAN REQUESTER ------------------------------------- a. At the DOS prompt, insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31) Diskette into your disk drive. (A: or B: ) b. Type dxmaid at A:\> prompt , then press . The IBM logo appear , press . c. Press twice. The Environment Information screen appears. d. Specify the following values for the fields on this screen: Use the to toggle between choices: Configuration for this computer? Yes Use existing configuration information? Yes Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Do you need 802.2 interface support? Yes Type change as need to drive and directory information below: Source for LSP A:\ Target for new configuration C:\lsp e. Make sure the value are correct. Press to store your choices. Process Adapter Option Diskette screen appear. g. Insert the Driver Diskette in your source drive and specify the path: A:\NDIS(or b:\). Then press . g. The necessary files are copied from the Driver Diskette to your target directory on the hard disk. g. Press three times. h. Insert the LSP diskette and press . The Current Configuration screen appears with the Accton EN220X series adapter and protocols already selected ("IBM IEEE 802.2" and "IBM OS/2 NETBIOS"). i. Press F4. LSP is installed completely. j. Use a text editor to edit the config.sys file. Specify at least 20 files in the FILES= line, like this: FILES=20 Once you have saved the config.sys file, reset the computer. k. Insert the DOS LAN Requester Install Diskette 1. l. Type: install. Press . IBM logo appears, press . m. Press twice more. The program prompts you for the pathname of the DOS LAN Requester directory. n. Specify the pathname for the DOS LAN Requester directory. (C:\DOSLAN is the default.) Press . The program asks you which services you require. o. Highlight either the "Send messages" or "Send, View, Edit, and Log messages" option. (Normally, you select the second option.) Press to confirm your choice. p. Specify the machine's ID and the domain ID. The domain ID must be the domain server ID and must be the same for all workstations on the network. q. Follow the prompts to complete the installation. 2. OS/2 LAN Server ---------------------- a. Copy ETHPOCK.OS2 & EN220x.NIF from a:\NDIS to c:\ibmcom\macs. b. Push "OS/2 LAN Service" icon. c. Push "Installation and configuration" icon. IBM logo appear. d. Press . e. Select , press . f. Select " Install or Configuration this Workstation". g. Select server type (add server or domain controller). " install or remove " appear. h. Select "Configure a component". i. Select "LAN Adapter and protocol support" . j. Push "configure" button. k. Select "Configure workstation". l. Select "Accton EN220x Ethernet adapter" in Network Adapter dialog press button, and select 802.2 press IBM NETBIOS press ,then press . m. Press four times. n. Press to backup old config.sys & autoexec.bat and create new config.sys and autoexec.bat. o. Shutdown the computer and restart it. -- THE END --