NetWare Message File: LSLC32.nlm 1.05, Tran v1.00 :;YD5f /EZctPly<<< BAD MESSAGE >>>LAN Protocol name missing %S protocol module is NOT loaded No protocols are registered The following protocol is registered: The following protocols are registered: Protocol: %S Frame type: %S Protocol ID: %x%04x Protocol: %S Frame type: %S Protocol ID: %x REGISTERInvalid or missing Protocol ID number Protocol %S frame type %S is ALREADY registered with protocol ID %x%04x Protocol %S frame type %S is ALREADY registered with protocol ID %04x Protocol IDs can NOT be changed after they are registered New protocol ID was registered Protocol ID could NOT be registered (error %u) New protocol ID was NOT registered Correct protocol command usage is: PROTOCOLS Displays all registered protocol IDs PROTOCOL REGISTER Registers a new protocol ID LAN frame type name missing %S frame type is NOT being used by any LAN board PROTOCOLTotal Tx PacketsGet ECB RequestsGet ECB FailuresTotal AES EventsPostponed EventsEvent Cancel FailuresValid Buffers ReusedReservedTotal Rx PacketsUnclaimed PacketsThe version of the MLID being loaded is not supported.VeRsIoN=1.06 Novell Link Support Layer for Client 32 message file.CoPyRiGhT=(c) Copyright 1996, 1997, 1998, by Novell, Inc. All rights reserved.LaNgUaGe= English (English)Link SupportMAX BUFFER SIZESMALL MIN COUNTMED MIN COUNTLARGE MIN COUNTXLARGE MIN COUNTHUGE MIN COUNTSMALL MAX COUNTMED MAX COUNTLARGE MAX COUNTXLARGE MAX COUNTHUGE MAX COUNT