DOS Client Message File: nwip.exe 0, Tran 0 4 R:@r}} 8 x i ` L6q=rUVcMessage file %s is invalid. Program load aborted. CoPyRiGhT=(C) Copyright 1990-1995 Novell, Inc. All Rights Reserved. NetWare/IP client has been successfully removed. Bound to logical board %u (%s) : Protocol ID %s Available command line options: /? Display this help screen. /D Eliminate Diagnostic Responder - Reduces size by 3K. /A Eliminate Diagnostic Responder and SPX - Reduces size by 9K. /U Unload resident NetWare/IP from memory. /F Forcibly unload resident NetWare/IP from memory, regardless of programs loaded above it. Using this option can cause a machine to crash if applications are still using NetWare/IP. /V Show NetWare/IP connect/current status to DSSs. /C=[path\]filename.ext ; Specify a configuration file to use (Default is NET.CFG). NetWare/IP has already been loaded. The LSL is not loaded. Please load the LSL then NetWare/IP. The loaded LSL is too old. LSL.COM must be v1.20 or higher. Cannot find a NetWare/IP client to unload. Cannot unload NetWare/IP because another program has been loaded above it. Unload the other program or programs and try again. NetWare/IP cannot be unloaded because the installed NetWare/IP or IPXODI is a different version than this NetWare/IP module. NetWare/IP cannot be unloaded because interrupt 0x%X is owned by another program. Unload the other program then unload NetWare/IP. A network adapter driver must be loaded before NetWare/IP can be loaded. IPX can't not find a board to bind to. Add a "BIND" entry to "PROTOCOL IPX" section and add a "PROTOCOL IPX id frametype" entry to the board's "LINK DRIVER" section in NET.CFG.IPX cannot bind to board "%u" because a IPX protocol ID for the "%s" frame type has not been registered with the LSL. Register an ID by adding a "PROTOCOL IPX id %s" entry to the "LINK DRIVER %s" NET.CFG section, replacing "id" with the protocol ID for IPX to use on this frame type. Reload the %s LAN Driver nowMaximum number of stacks already loaded. Either unload an existing stack or increase the maximum by adding a "MAX STACKS" entry to the "LINK SUPPORT" section in the NET.CFG file. Attempt to register a IPX Protocol ID failed. Increase the maximum number of stacks in the LSL.COM by adding a "MAX STACKS" entry to the "LINK SUPPORT" section in the NET.CFG file. A NetWare/IP or IPX protocol stack is already registered with the LSL. Invalid command line option was specified: "%s". Failed to locate configuration file "%s". NET.CFG will be used. Missing or invalid value for "%s" parameter was specified on line %u of the configuration file. Entry was ignored. Missing or invalid ON/OFF value for "%s" parameter was specified on line %u of the configuration file. Entry was ignored. Missing or invalid IPATCH values were specified on line %u of the configuration file. Entry was ignored. Specified board in "BIND" statement on line %u of the configuration file does not exist. Entry was ignored. Invalid "BIND" statement on line %u of the configuration file. Requires a board number (Example, BIND 2). Entry was ignored. Duplicate "BIND" statement on line %u of the configuration file. NetWare/IP cannot be bound to more than one board. Entry was ignored. An invalid entry was found on line %u of the configuration file. Entry "%s" ignored. Invalid "BIND" statement on line %u of the configuration file. Bind is not applicable to NWIP. Entry was ignored. It is a NWIP v1.1 compatible client TSR It is a post NWIP v1.1 client TSR FATAL: TCP/IP is not loaded FATAL: Unknown error resulting from get local IP address NetWare/IP client is loaded but NOT ready since TCP/IP is NOT available Failed to invoke nwipinit.exe, NWIP aborted ***** No DSS available ***** *DSS address: %-3d.%-3d.%-3d.%-3d NO_ANS Count: %d DSS address: %-3d.%-3d.%-3d.%-3d NO_ANS Count: %d ***** No NWIP Server Cache available ***** *NWIP Server address: %-3d.%-3d.%-3d.%-3d NO_ANS Count: %d Cannot pass NWIP Initialzation, NWIP.EXE is not loaded! NWIP Server address: %-3d.%-3d.%-3d.%-3d NO_ANS Count: %d NWIPINIT.EXE