NetWare Message File: nwipio 1, Tran 1 phKn;cCa2XUnable to add IPX's protocol ID.Added %s as the IO partner.Not on IO Engine of SFT III.Could not validate the IO partner address (%d).%s is an illegal IO partner address. The IO partner cannot be the address of one of the local IP interfaces.Will be using %s as the local IP address for NWIPIO.IP must be bound to at least one network interface. NWIPIO will not load until it detects an IP address for this node.Could not allocate memory to add %s as the IO partner.Could not allocate a resource tag.%s is not currently a local IP address.Will be using UDP port %u (0x%x).Ignored %s. The IO partner has already had the IO partner.UDP port %u (0x%x) is in use.Could not register port %u with UDP (%d).UDP rejected port %u (0x%x) as invalid.UDP rejected UDP interface version %u.%u.'%s' is not a valid port value.The board name '%s' is too long, it is truncated.UDP will not checksum frames transmitted by NWIPIO.UDP will checksum frames transmitted by NWIPIO.The address value is illegal.Ignored '%s' following the address.Found '%c'. Each byte of IP address must be separated by '.'.Please use 'Yes' or 'No' as the argument to '%s' parameter.'%s' is not recognized as affirmative or negative.Ignored the ambiguous parameter '%s'.Ignored the unrecognized paramter '%s'.'%s' is a duplicate parameter. The previous one is overriden.