NetWare Message File: CNTR2000.lan 1.00, Tran v1.0 %)Fe,eCn4{H<<< BAD MESSAGE >>>CNTR2000HardwareDriverMLID Bad Correlator CountUnknown ARB RequestsINFO: Token-Ring Adapter %d Data Rate = %d MBps. INFO: Max Packet Size = %d INFO: Shared RAM size = 8KB. INFO: Shared RAM size = 64KB. INFO: Shared RAM size = 32KB. INFO: Shared RAM size = 16KB. INFO: Token-Ring Adapter supports Fast Path Transmits. INFO: Max Packet Size forced to 2048 bytes .020: An interrupt failed to occur during initialization.022: Shared-RAM read/write test failed.242: The Remove MAC Frame process shut down the adapter.237: The adapter is beaconing.241: The Auto Removal process reset the adapter.239: The cable is disconnected at the board.240: The cable is disconnected at the MAU.BRT: DIR.SET.BRIDGE.PARMS error code = %x.BRT: DIR.CONFIG.BRIDGE.RAM error code = %x.201: DIR.OPEN.ADAPTER error code = %x.233: The adapter detected a duplicate station during insertion process.234: The adapter received a Remove MAC Frame during insertion process.235: The adapter cable was disconnected during the insertion process.236: The ring was beaconing during the insertion process.HSM_CSPEC_VERSION: 1.10TBZ=%uVeRsIoN=1.00 Novell Token-Ring message file.CoPyRiGhT=(c) Copyright 1996, by Novell, Inc. All rights reserved.LaNgUaGe= English (English)Tx Queue Depth greater than zeroNetwork Card requires resetWaiting for the adapter to respondAdapter is not responding, Reset adapter