NetWare Message File: tcpcfg.nlm 3.30.1, Tran 0 P _ x  0 G [  " + = c v , ? O n  <I/d!)9})Rw (Fk^Co8dw C|'2BixwH&,_3e&n!W%:X T s } !!!9!Q!!!k""""""#?#c#s##$F$$ %%%G%S%a%q%{%%%%%&1&C&_&r&&&& '9'J'\''''''(h(r((((")m)))-*m*****++A+U+}++,I,x,,,,,-&?-S-----".2.m...../T/////00011A1112%282_2222s u33b4t44445M555555556'6^66667L7m7r7y77777p8888y99999:=:U:o::::::;;$;J;p;;;;<4<H<^<~<<<<<<<<<<==9=M=s======#>=>Q>n>>>>>>>>2?U?h????D@X@@@@ A+Axx!yyyeNeighbor List:Authentication Password:OSPF Neighbor Address ConfigurationSNMP Manager Address ConfigurationEnter IP address. for List of Addresses.(Select For List)Address already existing on list, not added.WAN Call Destinations:SNMP Manager Table:Select Wan Call Destination which is the next hop of this route from list.Update TCP/IP Configuration?Directed Broadcast Forwarding:TCP/IPInsufficient resources for TCP/IP configuration.EnabledDisabledLocal IP Address:Subnetwork Mask of Connected Network:Broadcast Address:Forward broadcasts to specific network or subnetwork.Use of ARP:BootP Server not configured. Cannot enable the BootP Packet Forwarding. Please configure at least one BootP Server.Cost of Interface:Poison Reverse:Multicast Override IP Address:Force Proxy ARP:WAN Call Destination:Symbolic NetWork NamesAll the BootP Servers were deleted, the BootP Packet Forwarding will be disabled.Unexpected error returned from expert parameter handling: %d.Call destination for dedicated point-to-point links. to clear.Router's IP address for this interface connected to the network.Subnet mask for interface's IP network.HOSTS file is empty, cannot select IP address from it.Address to be used for broadcasting on this network.Directs IP multicasts to the specified address instead of multicasting.Enable to send and receive RIP packets.NETWORKS file is empty, cannot select IP address from it.RIP:Default Route0.0.0.0Filter Support:Enable if Forwarding or Routing Information filters are configured.INS=Insert DEL=Delete ESC=ExitModify the list of IP nodes which should receive SNMP traps over UDP.IP Address of SFT III Network: Enabled("Router")Disabled("End Node")Enter IP address of the SFT III network.Subnetwork Mask of SFT III Network: Configured WAN Call DestinationsDestination Name Type Remote IP AddressCould not open %s: %s. Could not write %s: %s. Disable: Present Normal RoutesEnable: Present Default RouteSubnet mask for the SFT III network.TCP/IP Expert Configuration(Not Specified)(None Specified)Expert TCP/IP Bind Options:Select this field to configure IP Bind options. FF.FF.FF.FFExpert Configuration Options:Use ARP to translate from an IP address to a physical address.When enabled, respond to ARP requests from directly connected networks.Select to view/configure Expert Configuration.Enable to send and receive RIP packets on this interface.Enable or Disable OSPF protocol on this interface.Node identification not understood in "%s".Unrecognized keyword in "%s".Modify IP Address of a RIP Neighbor.Modify IP address of the BootP Server.Modify IP address, INSert to select from list.Cannot get enough memory to complete operation.Trouble adding to the list: list truncated.Remote IP address:IP address to map to this call destination.Name of WAN call destination to use when this IP address is encountered.ENTER=Select ESC=ExitModify IP address of a node which should receive our SNMP traps.WAN Call Destination To IP Address Mapping ConfigurationUpdate database?Delete wan destination mapping from list?Delete all marked wan destination mappings from list?Unexpected NUT action encountered: %d.FF.0.0.0FF.FF.0.0FF.FF.FF.0.-_0..9A..Za..zModify IP Address of an OSPF Neighbor.TCP/IP Status:Select "Enabled" to activate TCP/IP.Both the WAN call destination and the IP address must be specified before the new mapping can be added.Both the IP Address of Network/Host and the Next Hop Router on Route fields must be specified for a Static Route."%s" is not a valid class A, B, or C IP address. It may not be used as the local IP address. "%s" is not a valid IP address.Call Type:Select permanent if you want this connection initiated during the bind.Trouble deleting %s while trying to update database: %s.Trouble while renaming %s to %s to make a backup copy: %s.Trouble repositioning %s to %s: %s. File not updated.List is read-only. That operation is not allowed.OSPF:Insufficient resources for modifying a list entry.Could not reposition input from %s. Cannot support updating this database.NetworkHostPassiveActiveRoute Type:Specifies whether this entry is for default, network or host route.IP Address of Network/Host:Enter IP address of the destination host/network.Next Hop Router on Route:Enter IP address of the router that is the next hop of this route.Metric for this route:Arbitrary cost for this route: legal values are from 1 to 16.Type of route:Will the indicated router actively announce this route to this network?Saw more than one host or net in %s.Net or host indicator without an address following in "%s".More than one router specified in "%s."Trouble writing static route database: %s. %s may contain some or all of the new information. The original database in %s has not been changed.Trouble closing the static routing database: %s. %s may contain some or all of the new information. The original database in %s has not been changed.Do you want RIP packets exchanged on this connection?Do you want OSPF packets exchanged on this connection?Trouble trying to manipulate entry. Error code %d.Delete current static routing entry from list?Delete all marked static routing entries from list?TCP/IP Static RoutesRestrict access to read only?TCP/IP Static Routing Database (Read Only) Destination Next HopStatic Route ConfigurationOn Demand (activated by data)Overwrite previously existing entry?Insufficient resources for adding that new element to the list.Permanent (active continously)Send OnlyList of currently configured WAN call destinations.List of currently configured static routes.ENTER=Modify INS=Insert DEL=Delete ESC=ExitTrouble reading %s: %s.Trouble writing %s: %s.Trouble closing %s: %s.The routine %s returned an unexpected value: %d.IP Address of Manager: An IP Address must be specified for the SFT III Network. The SFT III Network is a virtual network which connects the Mirrored Server Engine and the IOEngine. TCP/IP will not operate without this information.Delete current entry from list?Delete all marked entries from list?SNMP Manager TableSNMP Manager Table (Read Only)Subnetwork Mask:List of currently configured SNMP managers.Permanent WAN Call DestinationsUnexpected NUT key encountered: %d.Hello Interval:The host part of the SFT III Network Number address '%s' is either all 0's or all 1's. This is not a valid address and mask combination.Network Interface:Name of Network Interface to which IP is being bound.Normally subnet masks have contiguous network bits set. The bits in the subnet address mask you've given, %s, are not contiguous.Enter IP address of a node which should receive our SNMP traps.IP Address:NormalThe IP address in dotted decimal notation.Ethernet_IIEthernet_SNAPToken Ring SNAPFDDI SNAPNovell RX_NET (ARCnet)Frame Type:Frame type to be used by IP on this interface.The IP address in dotted hexidecimal notation.The host or network name.(Select to View or Modify)RIP Bind Options:Configure RIP bind options.OSPF Bind Options:Configure OSPF Bind options.ENTER=Select TAB=Decimal View ESC=Previous MenuENTER=Select TAB=Hexidecimal View ESC=Previous MenuCan not route ( TBD).Network Name Network AddressRIP Bind OptionsOSPF Bind OptionsENTER=Select TAB=Name View ESC=Previous MenuStatus:The subnetwork mask in dotted decimal notation.Originate Default Route:Priority:The subnetwork mask in dotted hexidecimal notation.The network or subnetwork portion of the IP address in dotted decimal notation.(Seconds)Router Dead Interval:Enable to send and receive OSPF packets.Subnet mask for the network.The network or subnetwork portion of the IP address in dotted hexidecimal notation.Let the router's priority to become the designated router on this network.Authentication key to be used by all routers on this network.The host portion of the IP address in dotted decimal notation.The host portion of the IP address in dotted hexidecimal notation.Seconds between transmission the transmission of Hello Packets.Seconds to wait before before declaring a neighbor router dead.Network:Host:IP Address EditorUnexpected error returned from IP address editor.Neighbor's Autonomous System:Autonomous System Boundary Router:Error in RIP (TBD).Autonomous System of the EGP Neighbor.Include routes learned from other IP routing protocols in OSPF advertisements?Specify RIP metric to associate with this interface.When enabled, advertise the router as a default router for the network.OSPF cost of sending a packet on this network."%s" is not a valid subnetwork mask.NegotiateEnable RIP on all network interfaces?Enable OSPF on all network interfaces?OSPF NeighborsWhen enabled, RIP will use Poison Reverse on the interface.OSPF Configuration:Select to configure OSPF Router ID, areas, and AS Boundary Router status.EGP:Enable or disable TCP/IP's Exterior Gateway Protocol.EGP Configuration:Select to view or modify EGP Configuration parameters.Static Routing:Enable or disable the use of statically configured routes.Static Routing Table:Select to view or modify static routes.BootP Packet Forwarding: IP Packet Forwarding:RIP will be disabled on all network interfaces. Proceed?Enable forwarding of BootP packets to configured BootP servers.Enable or disable Server as a TCP/IP router.OSPF will be disabled on all network interfaces. Proceed?BootP Forwarding Configuration:View or modify BootP configuration.A permanent point-to-point link over X.25 requires authentication. Please confirm that inbound authentication is enabled for network interface %s.The number of connections available for this network interface.Error in configuring OSPF.Compression Connections:Error in configring EGP.Route to Network/Host or Default:The neighbor's IP address "%s" should have the same network as the local IP address "%s".WAN Call DestinationsYou must configure the Local IP address before configuring the broadcast address.Binding TCP/IP to a LAN InterfaceOSPF ConfigurationBootP Forwarding Configuration Options"%s" is not a valid broadcast address for the attached network.Error in configuring BootP"%s" is not a valid multicast address for the attached network.The local IP address "%s" with mask "%s" is not a valid combination. The subnet part of the IP address cannot be all ones.The Permanent WAN Call Destinations configured for this interface have been deleted.No RIP neighbors have been configured in the RIP Bind Options. RIP neighbors are required for RIP to operate correctly on a Multi-Access WAN interface.EGP ConfigurationTCP/IP Protocol ConfigurationAutonomous System:Maximum Neighbors to Acquire:No OSPF neighbors have been configured in the OSPF Bind Options.Unique autnomous system ID under local administrative control. Required.Maximum number of concurrent EGP neighbor relationship.Select the add/delete/modify the list of EGP neighbors.Router ID:Stub Cost:Area Type:Authentication:Area ID:Virtual Link Configuration:Area Configuration:Select to configure remote neighbor on Virtual Links.Define the areas to which router is attached.Assign a unique Router ID.Cost of default routes advertise to stub area.Define a stub area to limit AS External Advertisements.Authentication applied to routing exchanges within the area.Enter a unique ID for this area.NoneSimpleDo Not LogStubRouter ID of Neighbor:Enter an IP Address for neighbor.No RIP or OSPF neighbors have been configured in the RIP and OSPF Bind Options. Neighbors are required for OSPF and RIP to operate correctly on a Multi-Access WAN interface.Do you want to configure the neighbors?Configure the neighbors in the RIP or OSPF Bind Options.Exit TCP/IP bind configuration.TCP/IP should not be bound directly to an SDLC driver. To configure TCP routing over SNA, bind to an interface configured for Link/SNA.Transit Area:The area the local router has in common with neighbor. INSert for Area List.First IP InterfaceOSPF AreasBinding TCP/IP to a WAN InterfaceList of currently configured OSPF Areas.OSPF Area ConfigurationDelete an Area from list?Area ID/Address must be specified.Log to FileNegotiate Segment Size with Peers:Enable/Disable MSS NegotiationBootP Server Address: Log Operation:Log to BootP ScreenLog File:Enter IP address of the BootP Server.Calculate Maximum Segment Size using:Enter Name of the Log file to use when Log to File was selected.Select Log Operation.Limit Packet SizeRemote Router ID Transit AreaList of currently configured Virtual Links.OSPF Virtual LinksDelete Virtual Link?OSPF Virtual Link ConfigurationAutomaticRouted On DemandManualType:Target TypeAssign:Assign Target.Delete EGP Neighbor?EGP Neighbor ConfigurationConfigured EGP NeighborsYesAdd/delete/modify a EGP Neighbor.Neighbor's Address:Enter IP Address of the EGP Neighbor.Neighbor Address Autonomous SystemList of currently configured OSPF Neighbors.NoDelete a OSPF Neighbor?IP Address of OSPF Neighbor: Enter IP Address of an OSPF Neighbor.Expert TCP/IP LAN OptionsHeader Compression:Compress TCP and IP Headers.Configure WAN call destination database.BootP Server List:Server BootP Address:Target BootP AddressBootP ServersFrom ListEnter DirectlyList of currently configured BootP Server addresess. BootP Server Address Configurationsys:\etc\bootp.logConfiguration file "%s" empty: "%s".Aborted reading from "%s" at line "%d": "%s".Error in "%s" at line "%d": invalid or misplaced parameter "%s".Error in "%s" at line "%d": missing or invalid value for parameter.Symbolic Host NamesSymbolic names and their IP addresses.Local IP Address must be specified to save configuration.The maximum of elements that can be configured in this list is %d.Split Horizon:Enable or Disable Split HorizonUpdate Interval:Remote Aging Time:Stubnet Support:EGP neighbor not configured.Virtual link neighbor and/or transit area not configured.ALERT: Transit Area "%s" has not been configured in the "Area Configuration" list. This Area MUST be configured from "Area Configuration".The transit area cannot be the backbone (0.0.0.0)."%s" is not a valid EGP neighbor address. The IP address must be class A, B, or C.Host Name Host AddressThis port '%s' has been configured as Numbered Single Point-to-Point Line. Multiple bindings are not allowed for such a configuration.This port '%s' has been configured as Unnumbered Point-to-Point. Multiple bindings are not allowed for such configuration. All connections through this port should be configured on the single Bind Screen.IP address '%s' is already being used by another TCP/IP interface. Each interface must have its own unique IP address.WAN Network Mode:This indicates the type of WAN connection specified for the binding.Numbered Single Point-to-PointUnnumbered Point-to-PointMulti-AccessRIP Mode:Remote IP address '%s' can be used in the mapping list only once.The subnet mask '%s' is less than the default mask '%s'.For port '%s' the WAN type cannot be changed from this 'Multi-Access' option. Exit form and delete any bindings associated with this port to configure for Point-to-Point WAN type.RIP Version. Choose RIPI or RIPII or RIPI & RIPII.Update IntervalSelect to view and configure RIP neighbor list.RIPII Options:Select to view and/or configure RIPII options.RIPIRIPIIRIPI & RIPIIRIP II ConfigurationRemote AgingStubnet SupportAuthentication key.Static Routes for this wan call (Read Only)Wan Call RIP Bind Options List of currently configured RIP neighbors.Static Routes For This Wan CallRIP NeighborsAuthentication.RIP Neighbor Address ConfigurationEnter IP Address of a RIP Neighbor.IP Address of RIP Neighbor: Router Discovery Options:Select to view configure router discovery options.Destination Address:The IP address used to send Router Discovery packets.Type DestinationAdd This Static Route?Since the Wan Call Directory has this call as 'ONDEMAND' you can choose only OnDemand Currently.Since this call is configured as Permanant, you cannot choose Ondemand here.BroadcastRouter Discovery Multicast(Minutes)Verify Remote Address:Enable to send router discovery packets.Router DiscoveryMore than one WAN Call Destination specified in "%s"."Call" indicator without a WAN destination following in "%s".Next Hop Type:Next Hop of this route can be a IP address or a WAN destination.WAN Call DestinationGateway IP AddressExpert TCP/IP WAN OptionsNetwork IP address bits which do not fall within the mask will be truncated. IP address '%s' will now be '%s'.Mask 255.255.255.255 is not allowed since a host route cannot be configured without selecting route to host.'%s' is not a valid Class A, B, or C network address.'%s' is not a valid Class A, B, or C host IP address.ENTER=Modify INS=Insert DEL=Delete TAB=Toggle Addr-Name ESC=ExitFrame Types AvailableThe list of available frame types..0..9A..Fa..fThe WAN Map address '%s' does not agree with the mask '%s' in the main bind form.This interface '%s' is connected to the same network as the interface using '%s'. Each interface must have its own unique network.The remote IP address, '%s', should have the same network as the local IP address, '%s'.The host part of the remote IP address '%s' is either all 0's or all 1's. This is not a valid address and mask combination.The host part of the local IP address '%s' is either all 0's or all 1's. This is not a valid address and mask combination.The local IP address and the remote IP address cannot both have the same IP address, '%s'.This port '%s' belongs to group '%s' for which a Numbered Single Point-to-Point Line has been already configured. Multiple Bindings are not allowed for such a configuration.Interface Group:An interface belonging to this network interface group has already been configured. Therefore, the WAN type cannot be changed.The bind interface of port '%s' with Local IP address '%s' already exists. Hence, another such combination is not possible.Group to which this port belongs.This address does not agree with the address mask. The Local Address is %s and the mask is %s.Used for AuthenticationCustomer Name:Tuple does not start with a call name in %sRemote Address absent in %sIllegal header compression option in %sUpdate Time:Garbage Time:Expire Time:Specify Garbage Collection TimerSpecify RIP Update TimeSpecify RIP Expire TimerUnable to Expand the group. Configure the router first.Could not parse file %sIf Poison Reverse is Enabled, Split Horizon cannot be Disabled.RIP Version:Receive OnlyRIP Mode. Choose Send Only, Receive Only or Normal (Send and Receive).Specifiy the Wan Call Destination.IP ParametersEnter the Remote IP Address first before you can continue with Static Routes.Enter the Remote IP Address before you can continue with RIP Options.Enter the Remote IP Address FirstBoth Call Name and Remote IP Address have to be entered before this field can be changed.Enter Wan Call Destination before Remote IP Address.Range: 0 to 65535Garbage Timer should be atleast 4 times Update TimerExpire Timer should be atleast 6 times Update TimerUpdate Time should be set such that the Garbage Time and the Expire Time are atleast 4 times the Update Time.Enter call name first.Remote IP address for this customerThis group '%s' has been configured as Numbered Single Point-to-Point. Multiple bindings are not allowed for such a configurationThis group '%s' has been configured as Unnumbered Point-to-Point. Multiple bindings are not allowed for such configuration. IP Address %s is already on this network. Delete the bindings to this address if this change is needed.Call %s has a remote address %s which is not in the same network as this local address %s.Fill in the local address.Expire Timer range : 180 to 65535Garbage Timer Range : 120 to 65535Update Timer Range : 30 to 10922TCP Configuration:Set Internet limit or Negotiate MSS.TCP ConfigurationWan Call %s is already in use.Since the wancall is ondemand and the bind is Multi-access, it is mandatory to specify the remote ip.536 bytes, if remoteLocal Interface MTUUnknown keyword %s encountered in Wan Configuration file.IP address of Network/Host must be specified for a Static Route.Remote IP Address must be specified."%s" is not a valid class A, B or C IP address. It may not be used as the Remote IP Address.Delete the Wan Calls associated with IP Address %s and Update TCP/IP configuration before editing the ipaddress. IP Address: Subnet Mask for IP Address ESC=Previous MenuAssign an IP address to this interface. Each interface to which TCP/IP is bound must have a unique IP address.Assign the subnetwork mask for the network connected to the interface. Forward Source Route Packets:Forward IP Source Route Packets.Enter the Remote IP Address if 'Verify Remote Address' is to be Enabled. Remote Address Cannot be verified unless a Remote IP Address is furnished.DHCP ConfigurationDHCP:DHCP Log File:sys:\etc\dhcp.logIf Bootp is Enabled, DHCP cannot be EnabledLogging:Use DHCPConfig.NLM to configure more parameters.DHCP is Enabled at this time. Disable DHCP in order to be able to Enable Bootp.Disable Bootp and Enable DHCP ?DHCP cannot be enabled unless BootP is disabled. Currently, BootP is enabled.Disable BootP and Enable DHCP ?Disable DHCP and Enable BootP ?BootP cannot be enabled unless DHCP is disabled. Currently, DHCP is enabled.Range Start:Range End:IPCP Address Assignment Range:IPCP Address Assignment RangeBoth start and end of IP address range should be specified.:.0..9a..zA..Z\_-/IP Load Sharing:Enable/Disable IP Load Sharing for OSPF.Start Address should be less than End AddressSelect to configure IP Address RangeEnter the Start Address of the IP Address RangeEnter the End Address of the IP Address RangeThe address %s does not fall into the same network defined by the local address %s with mask %s. It is recommended that you configure the IPCP Address Assignment Range such that the range of addresses belong to the local network.Please re-assign IPCP Address Assignment Range. The range of IP Addresses do not belong to the same network.Route Aggregation:Aggregate NetworksNetwork MaskMask:Delete this network ?Select to View/Modify the Aggregated Network listUnable to open file %s. Please check the path again.Static On DemandRIP cannot be Enabled on a Static On Demand CallRIP cannot be Disabled on a Routed On Demand CallIPX/IP Gateway:Enable or disable the IP/IPX gateway.IPX/IP GateWay and DNS Resolver Configuration:Select to view or modify DNS Resolver ConfigurationDNS Resolver ConfigurationDomain Name:Enter the domain name.Name Server #1:Name Server #2:Name Server #3:Enter the name or IP address of the DNS name server to access.An error occurred while updating an IP/IPX Gateway configuration file (SYS:\ETC\RESOLV.CFG). Configuration changes not saved.DNS Resolver Configuration:Client Logging:Enable or disable client logging.Console Messages:Select the type of messages to display on the system console.Errors onlyWarnings and errorsInformational, warnings and errorsGateway Configuration:(Derive From NetWare Server Name)Gateway Name:Enter a name to override the use of the server name.Changing the name of the IPX/IP Gateway will cause all gateway connections to be dropped when the server is reinitialized.Access Control:Select "Enabled" to enable access control on the IPX/IP Gateway.Enable the IPX/IP Gateway?To configure the IPX/IP Gateway, you need to have certain information about your Domain Name System (DNS). Specifically, you must know the name of your domain and the IP address of a name server for your domain.No license for the IPX/IP Gateway is present.Could not load SYS:SYSTEM/GWDSINST.NLM. Generally this means that the NLM is not in the specified directory or it is already loaded.Maximum Packet Receive BuffersMaximum Packet Receive Buffers are currently set to %lu. This value must be greater than or equal to 1000 for the IPX/IP Gateway to function properly. This parameter can be set using the SERVMAN.NLM utility or added manually to the STARTUP.NCF file.The IPX/IP Gateway Server NDS object was not successfully created. The IPX/IP Gateway status will now be set to DISABLED.Remote Router will Dynamically Assign the IP Address: Internet Service Provider or remote router will Provide the IP AddressThe previous field is set to 'Yes'. Wan Network Mode can only be set to "Unnumbered Point-to-Point"Network Address Translation:Network Address TranslationPrivate Address:Static OnlyDynamic OnlyPrivate address should be provided when Static is selected.Network Address Translation Status. Choose from the menuPrivate Mask:Static and DynamicNetwork Address Translation Table:Network Address Translation TablePublic Address Private AddressPublic Address:Both Public and Private Addresses should be provided.Configure/View the Network Address Translation TableList of Network Address TranslationsNetwork Address Translation Public AddressNetwork Address Translation Private AddressNetwork Address Translation Private MaskEntryEntriesLAN Static Routing:LAN Static Routing Table:Public Address %s and Private Address %s already paired. You may not configure duplicate Public Address and Private Address pairs.Private Address %s is already paired with Public Address %s. Repeated Private Address entry is not allowed.Private Address %s is already paired with Public Address %s. Repeated Public Address entry is not allowed.The new public address that you have typed in (%s) is already in the private address list.The new private address you have typed in (%s) is already in the public address list.LAN Mapping Address is absent in %s.Source IP Address Mapping on LAN:Provide a LAN Address to be used as a source address for this callMultiHome Support:MultiHoming Address ListMultihome Address List on this Interface:Multihome Address ListMultiHome IP Address ConfigurationPublic and Local addresses are on different networks. Add anyway?Address %s is already bound to this interface. Entry not added.Address %s does not belong to the same network that the local address %s belongs to. Entry not added.This Address is used as a public Address in NAT. Delete the public address in NAT too?Delete the Network Address Translation Entry too?This multihome address will be deleted. This address is also in the Network Address Translator's (NAT) list as a Public Address. Do you want to delete the entry in NAT too?Delete this address from the Additional IP Addresses list too?This NAT Entry will be deleted. The public address of this entry is also being used in the "Additional IP Addresses" List. Do you want to delete the address from that list too?"Static and Dynamic" cannot be chosen if remote router is providing the address to this interface. This is because there would be only one "Public Address" and that will be used by Dynamic Mode NAT.Enter WAN Call Destination before LAN AddressDynamically Assigned Numbered Single Point-to-PointAddress %s is already bound to an interface. This Address cannot be used as a Range Start or Range End.You cannot configure %s as the public address in a static host address mapping. This address is already used for dynamic mode Network Address Translation on this interface.VPN filters are active. IP filtering cannot be disabled."Static Only" cannot be chosen when remote router is providing the address for this interface.Public Address %s and Private Address %s already paired in the list of %s's Network Address Translation Table. You may not configure duplicate Public Address and Private Address pairs.Private Address %s is already paired with Public Address %s of %s's Network Address Translation Table.Private Address %s is already paired with Public Address %s in %s's Network Translation Table.The new public address (%s) that you have type in is already in the private address list of %s's Network Address Translation Table.The new public address (%s) you have type in is already in %s's Network Address Translation Table.Network Address Translation Entry