NetWare Message File: csl.nlm 2.01, Tran 1.0 3Ìþ3_™·Õö zÂíV¦`«jØH™Ëõ$Y„½IˆÀ L € Á c › Ò  < f ‘ ½ # l } È  Unable to register for volume SYS: mount event. Unable to register for volume SYS: dismount event. Unable to register for down server event. Unable to allocate resource tags for memory allocation. CSL General Memory AllocationCSL Event Handler Memory PoolCSL Call Information Memory PoolCSL Call Back TimerRetrying call for %s to destination %s - Configuration or equipment change required for this call to succeed. Incoming call connection established for protocol %s on interface %s. Application not registered with the CSL. Memory allocation failure occurred. Unable to allocate event info structure. System needs more memory. Call disconnection for protocol %s to destination %s. %s Event code = 0x%x. Call attempt by protocol %s to destination %s failed. No automatic call retry was requested. CSL API violation occurred. A process time only function was called at interrupt time. Call for protocol %s to destination %s queued until port becomes active. WARNING: Unable to get CALL_INFO structure. System memory insufficient or call activity too high. A configuration error occurred. Calls with board = WILD_BOARD must set port = WILD_PORT. Call by protocol %s to destination %s failed media variation test. Reconfiguration of call target needed. Retrying call for %s made to destination %s. Call connection established for protocol %s to destination %s. Call disconnection for protocol %s on interface %s. %s Event code = 0x%x. The failure was due to a memory allocation error.There was no reason given for the event. The event occurred due to a driver unloading. The event occurred due to an application unloading. The event occurred for an unknown reason. The event occurred because a bad call handle was passed.The event occurred because no board matching the request could be found. The event occurred because the requested port is already in use. The event occurred because the requested port does not exist. The event occurred due to an inactivity timer request. The event occurred because the requested virtual circuit is in use. The event occurred due to an invalid signature in the call structure. The event occurred due to a port becoming inactive.An incoming call for protocol %s on interface %s was rejected. The event occurred due to the application rejecting the call. The event occurred due to a reject by the remote side of the WAN connection, or the media failed. The event occurred due to a local failure of the link. The event occurred due to a recoverable failure event.The event occurred due to an unrecoverable failure of the link.The event occurred due to a link failure.The event occurred due to a link request.The event occurred due to a local request.The event occurred due to a remote request.An incoming call for a protocol %s on interface %s was rejected. Check protocol binding to interface.The event occurred due to a duplicate call to the specified destination. An incoming call on board %s for an unrecognized protocol %s was rejected.An incoming call for an unrecognized protocol %s was rejected on interface %s.An incoming call for protocol %s was rejected on board %s. Check protocol binding to board.