ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³ Install Windows 95 Device Driver for UM8672 VESA IDE Controller	    ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

    Notes:
	  UM8672.MPD -- UM8672 VESA IDE Device Driver for Windows 95
	  UM8672.INF -- Setup Information File for UM8672.MPD

	  These two files must be located on the same directory of
	  the install floppy diskette.


    Installation:
	  If you want to install UM8672 VESA IDE device driver for
	  Windows 95, please follow the steps below.

       1. Check your system requirements, Windows 95 must be fully installed
	  on your system.

       2. Remove IDE device drivers in the AUTOEXEC.BAT and CONFIG.SYS files,
	  especially any drivers that control ATAPI CD-ROM.

       3. Remove the default installed IDE device drivers.

	  I. Open the Control Panel.

	  II. Invoke the System box.

	  III. Click on the Device Manager button.
	       A list of the system devices will be displayed.

	  IV. Click on the Hard disk controllers record. There should
	      have two instances listed:

	       * Standard IDE/ESDI Hard Disk Controller
	       * Standard IDE/ESDI Hard Disk Controller

	  V. Remove the Primary & Secondary Controller.
	     1. Select the second instance of the Standard IDE/ESDI Hard
		Disk Controller.
	     2. Click on the remove button.
	     3. Select Yes when prompted to remove this controller.
	     4. Select the remaining instance of the Standard IDE/ESDI Hard
		Disk Controller .
	     5. Click on the remove button.
	     6. Select Yes when prompted to remove this controller.

	  VI. Select Yes when prompted to re-start Windows 95,
	      and restart Windows 95.

       4. Add the UM8672 VESA IDE device driver.

	  I. Open the Control Panel.

	  II. Invoke the Add New Hardware applet.

	  III. Do not have Windows search for your new hardware.

	  IV. Select the Hard disk controllers item as the hardware type
	      you want to install.

	  V. Click on the Have Disk button to install UM8672 VESA
	     IDE device driver.

	  VI. Insert the folppy diskette containing the driver files into
	      the floppy drive.

	  VII. Click on the Next button to continue the installation.

	  VIII. Click on the Finish button when the installation is completed.


       5. Select Yes when prompted to re-start Windows 95.

	  After installation, the UM8672.MPD is stored in the
	  c:\<Windows 95 directory>\System\IoSubsys directory.