+=========================================================+
     |  EIDE2300PLUS Hard Disk Driver for Windows NT 3.1 & 3.5 |
     +=========================================================+

     You need this driver only if you want to run in TURBO mode under
     Windows NT.


     ********* Installing the Driver *********

     1. In "Program Manager", double click on "Windows NT Setup" in
        "Main" group.

     2. In "Windows NT Setup", select "Options",
        next choose "/Add/Remove SCSI Adapters..."

     3. In "SCSI Adapter Setup", click on "Add...".

     4. In "Select SCSI Adapter Option", select
        "Other (Requires a disk from a hardware manufacturer)" in the
        "Adapter:" box.

     5. An "Insert Diskette" box will appear.
        Insert the driver diskette into drive A: and type "A:\WIN_NT\NT3.1"
        into dialogue box.

     6. A "Select OEM Option" box will appear.
        Select "Promise Technology Inc. EIDE2300PLUS Controller" and click 
        on "OK".

     7. A "Select SCSI Adapter Option" will appear.
        Click on "Install".

     8. After successful installation, the "SCSI Adapter Setup" box will
        show that "Promise Technology Inc. EIDE2300PLUS Controller"
        has been installed.

     9. Reboot your computer.



     ******** Changing Operating Mode *******

     If you want to change the operating mode, please type the following
     command in a "DOS Prompt" session:

        PTITURBO

     The following message will be shown on the screen to ask you which mode
     will be set:

        Will the controller be in TURBO or FAST mode
        (T/F)? (default=T)

     Please answer 'T' or 'F' for your setup.

     After the changes have been made, please do a hard boot of the system.


     ******** Removing the Driver ********


     1. In "Program Manager," double click on "Windows NT Setup" in
        "Main" group.

     2. In "Windows NT Setup", select "Options",
        next choose "/Add/Remove SCSI Adapters..."

     3. In "SCSI Adapter Setup",
        select "Promise Technology Inc. EIDE2300PLUS Controller" and
        click on "Remove".

     4. After successfully removing the driver, the "SCSI Adapter Setup" 
        box will show that "Promise Technology Inc. EIDE2300PLUS 
        Controller" has been removed.