*****************************************************************
*                                                               *
*       SW-120 SCSI Adapter Driver/Utilities Ver. 1.10          *
*       for IBM OS/2 1.10 - 1.3, and MS-OS/2 1.3                *
*                                                               *
*****************************************************************

This diskette contain the software driver for IBM OS/2 v1.1 - 1.3,
Microsoft OS/2 v1.3 Layered Architecture Device Driver (LADDR), and
SCSI hard disk utilities.

The following are the list of files on this diskettes.


 Volume in drive A is SW-120      

PRIMPREP EXE    13952   6-04-92 ; Primary SCSI Adapter Installation Utility
SECPREP  EXE    13952   6-04-92 ; Secondary SCSI Adapter Installation Utility
CSDPREP  CMD     1236   9-11-91 ; Installation script for MS-OS/2 1.3 LADDR
BASE         <DIR>      8-21-92
BID          <DIR>      8-21-92 ; MS-OS/2 1.3 LADDR Adapter drivers directory
SCD          <DIR>      8-21-92

 
 Directory of A:\BASE

COMMON       <DIR>     08-21-92
01           <DIR>     08-21-92
02           <DIR>     08-21-92

 Directory of A:\BASE\01

BASEDD01 SYS     33404 06-25-91 
DISK01   SYS      1058 06-06-91
ESDI-506 BID      8806 06-25-91
FLOPPY01 SYS     18609 06-25-91
 
 Directory of A:\BASE\02

ABIOS    BID      8852 06-25-91
BASEDD02 SYS     36220 06-12-91
DISK02   SYS      1058 06-06-91
FLOPPY02 SYS     16721 06-25-91

 Directory of A:\BASE\COMMON

IOCONFIG SYS      3189 06-25-91
IORUN    SYS      1359 06-25-91
IOS1X    SYS     13775 06-25-91
STDDISK  VSD      4392 06-25-91
DISK     TSD      8042 06-25-91

 Directory of  A:\BID

BT54X    BID     3891  12-17-91
BT64X    BID     3909  12-17-91
BT74X    BID     3861  12-17-91
BT54X    TXT       25  10-15-91
BT64X    TXT       25  10-16-91
BT74X    TXT       26  10-15-91

 Directory of  A:\SCD

DISK0    SCD     1348   9-09-91
SYSINST  SCD     5793   9-11-91


Installation of Microsoft OS/2 rel 1.3 "LADDR" with BusTek SCSI Host Adapters.

-Operating with the new MDI OS/2 Driver:
-Please, first make a copy of the OS/2 Install Diskette.
-Using the copied diskette, copy the additional BTxxx.BID and the *.txt file
 to the OS/2 Diskette.
-Rename the BTxxx.BID to BOOTBID.BID.
-Using the copied disk proceed with installation.
-Remember the copied diskette is now the new Master.
-After the installation is complete, the system be ready to boot.