YNAdaptec FLASH Utility Version 1.0<> Moves Cursor, Selects Option, Goes Back, *=Default<> Moves Cursor, Selects Option, Exits<> Moves Cursor, Selects Option, Goes Back<> Moves Cursor, Goes Back, *=Default<> Moves Cursor, Goes Back<> Moves Cursor, Selects Option, Goes Back<,PgUp/Dn> Moves Cursor, Goes Back, *=DefaultAHA-^294X Family %1^Configure Array Scanning for host adapter/drive information. Please stand by...Reading flash binary download file. Please stand by...Disk array driveDisplay ^ArraysDo you want to continue? (y|n) Press any key to continue...Press to select AHA-2940U AHA-2940UW AHA-2944UWEnter = Flash selected Board Up/Dn Arrow = View Board Rt/Lt Arrow = View Details Esc = Return to Previous MenuPlease wait about 20 seconds...Unimplemented Host Driver Emulation Request!^Update BIOS Update On-Board ^EPROM This selection allows you to configure SCSI related options on the selected AAC-330 adapter card.AAC-330 Switch FLASH Memory Requested! Do you want to continue? (y|n) Host Adapter BIOS Update Requested! Do you want to continue? (y|n) The BIOS has been updated successfully! The new BIOS checksum is %1. You may quit and reboot, or continue with another host adapter card.!!! Please Wait !!!! !!! Please Wait !!!! UPDATING BIOS....... System must NOT be turned off !!! Please Wait !!!! !!! Please Wait !!!!AAC-330 FLASH Memory has been Switched! Please reboot for this change to take effect.C9BBBACDC8BC%1DABFB3C4C0D9DBCFPlease waitDo you want to exit the Adaptec FLASH BIOS Update Utility (y|n) B0Please reboot your PC to continue.Formatting<> Moves Cursor, Goes Back<> Moves Cursor, Selects Array, Goes Back <,PgUp/Dn> Moves Cursor, Selects Option, Goes Back, *=Default Cancels Input, AcceptsMB GB Data Block Size = %1KB Are you satisfied with your selections? (y|n) Arrays must be defined in sequential order!Define the current array before selecting the next array!You must define at least one array before proceeding.Adaptec Array #%1A spare's capacity must equal or exceed the smallest member in the array.Installation complete. The Adaptec array(s) have been defined, and may be formatted by selecting Format Array from the Adaptec Array Administrator. Channel %1 Main Menu No Adaptec arrays have been configured yet!The Adaptec array selected has not been configured!This array is not the proper RAID level for this function.Invalid entry.Maximum number of arrays already configured.^Add an Array Used to add an array. Maximum allowable array count is 4.^Delete an Array To delete your only array, use the De-install Array NLMs menu option.Deletes the specified array from your system.Unable to access drive #%1.This Adaptec utility is incompatible with the Adaptec disk array driver.Configuration for Array #%1UninitializedMember SCSI ID Channel Status CapacitySpare%1Failed to respondMarked DOWNUnformattedReconstruct needed DOWN  UP %1MBGBSideMirrorPrimarySecondary#%1Array # = %1Change Array ^Configuration ^Redefine an Array Used to redefine the drives in an existing array.Add ^Spare Drive(s) This array already has the maximum number of spares.This function is used to add a spare to an existing array.DriveSizeManufacturerChnIDTypeDrivesCreatedVerifiedReconstructedNeeds to be re-mirroredNot an Adaptec disk array memberSector 0 I/O error Array # Member SCSI ID Channel Status Bus #%1Adaptec Array AdministratorAdaptec Array Format#%1 %2 SCSI IDs on Channel  #%1 %2 %3Adaptec Array #%1 Array #%1 Initialized on PCI Bus #%1Bus #=%1 Channel=%2 SCSI ID=%3^Redefine an Array Array #%1,Spare #%2^Format Array An array may be formatted/initialized as RAID0, RAID0 CVT, RAID5, RAID5 CVT, or Mirrored. All data is lost once formatting starts.Init MenuFormat MenuLow-Level ^Format an Array Improper drive count for this type of array.Initialize to RAID^5 RAID^5 Format ^Initialize an Array Initialize to RAID5 C^VT RAID5 C^VT Format An array with spares may not be formatted as RAID0. Initialize to RAID0 ^CVT RAID0 ^CVT Format Initialize to RAID^0 RAID^0 Format Mirrored arrays must consist of an even number of members.Initialize to ^Mirrored ^Mirror Format Are you sure? (y|n)Unable to access drive #%1. Initialization of Adaptec array #%1 is complete.Low-level formatting of array #%1 is complete.Formatting array #%1's drives... Writing system sectors... Writing reserved sectors... Array Model = %1Are you sure you want to delete array #%1? (y|n) Use Up/Down Arrow keys to select drive; Enter to execute; Esc to quit.The Format command failed on drive #%1.Do not shut down the server until formatting has completed.Elapsed time %1Do not shut down the server until formatting has completed. Formatting array #%1 drives... elapsed time = %2.Initializing all blocks on array #%1 to zero ... %2 complete.A SCSI Inquiry command failed.Product(%1) Page(0x%2) A SCSI Mode Sense command to a drive in the disk array has failed.The Read Capacity command for drive #%1 failed.A SCSI Mode Select command to a drive in the disk array failed.Offset(%1) Val(0x%2) Zone number greater than max zones in table. Specify drive(%1) defects? (y|n) Specify cylinder: Specify head: Specify byte or sector: Failed to open Adpatec drive definition file.Accept default or refer to the array user's manual for further details.Do you want to specify a new data block size? (y|n) %1KB 16 KB Cannot open %1. AAA-^13X Family %1Press to select AAA-131 AAA-132 AAA-133This FLASH utility supports the following Adaptec host adapters: AHA-2940U AHA-3940U AAA-131 AHA-2940UW AHA-3940UW AAA-132 AHA-2944UW AHA-3940UWD AAA-133 The utility will: 1. Search for any supported Adaptec host adapters in the system. 2. Give you the option to read and save the current BIOS. 3. Give you the option to erase the current BIOS (not recommended). 4. Give you the option to update the host adapter BIOS. 5. Exit and reboot.AHA-^394X Family %1Press to select AHA-3940U AHA-3940UW AHA-3940UWDThis array has not been assigned any spares.%1 WARNINGDelete ArrayAdaptec Array #^1Adaptec Array #^2Adaptec Array #^3Adaptec Array #^4 Array #%1 went off-line.Initialize ^Logical Arrays Format Logical ^Arrays Selection ListArray StatusArray State = Array Substate = UNKNOWNNumber of members = %1Spare drive %1 status = UPmarked DOWN Adaptec disk array #%d has DOWN drive(s). Spare drive #%d of array #%d failed standby test. Member %1 status = Select Array TypeConfigure Adapter Options^Low-Level Format Initialize Array to ^Zero RAID^0 RAID0 ^CVT ^Mirrored RAID^5 RAID5 C^VT Select Format ModeCreation date = %1AHA-3980 Two Channel RAID&AAC-330Viking IIOff-lineConfiguration MenuType=Drive Channel IDSpare Channel IDArray #%1=%2 FATAL ERROR: Could not issue commands to the I/O Manager (driver level).FATAL ERROR: No RAID controllers found.FATAL ERROR: Could not find required flash download file.FATAL ERROR: Could not open required flash download file.FATAL ERROR: Could not read entire flash download file.FATAL ERROR: Invalid flash download file.Display the configuration of an existing array.Define the configuration of a new array.Delete an existing array.Redefine the configuration of an existing array.Formatted for a %1 drive array.Formatted as drive %1.Formatted for a different array.Inquiry command failed.Read Capacity command failed.Reconstruct command failed.^Blink Drive Lights Array #%1,Member #%2Up/Dn Arrow = View Channel Rt/Lt Arrow = Select Board Esc = Return to Previous MenuDisplay Host ^Adapter DrivesConfiguration change implemented.Adaptec disk array configuration changed.AHA-3985 Three Channel RAID%s Bus #%d RAID Boards ^Update Host Adapter BIOSDisplay ^Current BIOS CheckSumDisplay ^New BIOS CheckSum^Save Current BIOS to file^Erase Current BIOS^Quit and RebootUpdate current Adaptec BIOSDisplay the current host adapter BIOS checksumDisplay the new BIOS checksum from floppySave the current host adapter BIOS to a fileErase the current host Adapter BIOSQuit and reboot Utility Menu The Current BIOS CheckSum is: %1The New BIOS CheckSum is: %1!!! Please Wait !!!! !!! Please Wait !!!! ERASING BIOS....... System must NOT be turned off !!! Please Wait !!!! !!! Please Wait !!!! WARNING! Erasing the BIOS will leave the host adapter unusable until you load a new BIOS. You may want to save the current BIOS before erasing it. Do you really want to continue? (y|n) The BIOS has been erased successfully!!!! Please Wait !!!! !!! Please Wait !!!! SAVING BIOS ......... !!! Please Wait !!!! !!! Please Wait !!!!The BIOS image has been saved successfully!Please enter the file name to save the current BIOS to and press when done or press now to select the default file name. Please enter the file name of the new BIOS to update and press when done or press now to select the default file name. The current BIOS will be saved as: %1 Do you want to continue? (y|n)The current BIOS will be updated using: %1 Do you want to continue? (y|n)^About FLASHList of supported host adaptersERROR: No %1 host adapter found. Host Adapter Boards %s Bus #%d Device #%02xHPress: to selected Board to move cursor to return to Previous MenuERROR: Could not find %1.ERROR: Could not open %1. Directory may not exist!Please enter the file name of the file to get the checksum and press when done or press now to select the default file name. ERROR: No PCI BIOS found.!!! Please Wait !!!! !!! Please Wait !!!! VERIFYING BIOS....... !!! Please Wait !!!! !!! Please Wait !!!!FATAL ERROR: BIOS Verification Failed. Please make sure your host adapter uses a 512K (64KX8) Flash EEPROMNone of the following supported Adaptec host adapters were found: AHA-2940U AHA-3940U AAA-131 AHA-2940UW AHA-3940UW AAA-132 AHA-2944UW AHA-3940UWD AAA-133 Please ensure that the cards are properly seated. Please press any key to exit. Goes Back, Save BIOS, <,,BackSpace> Modify Path ERROR: Fail to save BIOS as %1. Make sure you have enough disk space. Goes Back, Update BIOS, <,,BackSpace> Modify Path Goes Back, Get Checksum, <,,BackSpace> Modify Path^Other Options Other Options Menu Run other options such as Display Current/New BIOS Checksum, Erase/Save BIOSERROR: General error reading drive A. Please make sure floppy disk is insertedPlease press any key to reboot!!! Please Wait !!!! !!! Please Wait !!!! READING FILE ....... !!! Please Wait !!!! !!! Please Wait !!!! WARNING! This flash utility will always reboot the system when it exits. Do you still want to continue? (y|n)ERROR: Your filename path is too long. Please shorten your filename path to 40 characters.ERROR: Write-Protected error writing drive A. Please make sure floppy disk is not write-protectedERROR: Your system implements an older hardware mechanism which is not support by this Flash Utility. Please use a newer machine to flash your Adaptec host adapter. Please press any key to exit.