Drivers for 3-1/2" floppy installation.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºREADME - This file describes the installation procedures for installing  º
º         EV-634 Viewpoint PREMIUM Windows 3.1 drivers.                  º
º                                                                         º
º                                                                         º
º                                                                         º
º                                                                         º
º			                   				  º 
ºJIM GOUGH                                                    	 	  º 
º                                                                         º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

These Everex Window 3.1 drivers support Everex extended graphic modes on the
EV-634 Viewpoint PREMIUM card. 

Files included:
	VDDTL14.386   -   386 ENHANCED MODE DRIVER
	VGA414.DRV    -   640 X 480 X 16 COLOR DRIVER
	VGA443.DRV    -   640 X 480 X 32K COLOR DRIVER
	VGA448.DRV    -   640 X 480 X 256 COLOR DRIVER 
	VGA463S.DRV   -   800 X 600 X 32K COLOR DRIVER 
	VGA468S.DRV   -   800 X 600 X 256 COLOR DRIVER
	OEMSETUP.INF  -   OPTIONS LIST DISPLAYED BY SETUP 
	VGA474.DRV    -   1024 X 768 X 16 COLOR DRIVER
	VGA478.DRV    -   1024 X 768 X 256 COLOR DRIVER
	VGACOLRX.GR2  -   COLOR GRABBER FILE
	VGAMONOX.GR2  -   MONOCHROME GRABBER FILE
	README        -   THIS FILE

WARNING : EVEREX SYSTEMS isn't responsible for any losses due to these drivers. If you find
          any incompatibilities or bugs in these drivers, please leave a 
          message for me on the Everex BBS (510) 226-9694.

         INSTRUCTIONS  FOR  INSTALLING  EVEREX  WINDOWS 3.1  DRIVERS
*****************************************************************************
Step 1 - Install Windows 3.1 on your system if it is not already installed, 
         using Microsoft's standard VGA option.
      
Step 2 - Go to the hard disk which contains Windows 3.1, and change to 
         the Windows 3.1 directory.  For example: CD \WINDOWS.

Step 3 - Run Windows 3.1 SETUP by typing in <SETUP> at the DOS prompt and
         hitting ENTER key.

Step 4 - When SETUP program displays your current configuration, use arrow
         keys to highlight the "Display:...."  line then hit ENTER key.  A
         list of display options appears on your screen.
 
Step 5 - Use arrow keys to highlight to the "Other" selection at the bottom 
         of the list and hit ENTER key. When prompted to give the path for 
         your Windows drivers, enter the path telling windows where to find
         these drivers on your system.

Step 6 - Windows will read the OEMSETUP.INF file then you will be prompted
         to insert several Windows 3.1 disks (Windows 3.1 uses several
         Microsoft video drivers with this new version.* )
         
        * Note: Depending on whether you installed Windows from 3.5 inch disks
                or from 5.25" inch disks, Windows may keep asking you to insert
                the same disk over and over. This is because the files are in a
                different order from one size disk to the other. (example: 
                there are only 5, 3.5 inch disks, and there are 7, 5.25 inch
                disks)

Step 7 - Windows will also prompt you to insert the Viewpoint Premium drivers 
         disk, or you can type in the path to find the files on your hard drive.


Step 8 - Windows is now configured to run in your selected video resolution.



*****************************************************************************