ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºREADME - This file describes the installation procedures for installing  º
º         EV-235 Ultragraphics Windows 3.0 driver.                        º
º                                                                         º
º1-15-91   Version 1.0       Initial release of driver.                   º
º5-10-91   Version 1.1       Updated 1664x1200 driver.                    º
º 1-7-92   Version 1.2       Updated EV235x4.GR3                          º
º                                                                         º
º                                                                         º
ºJames S. Gough                                                           º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This Everex Windows 3.0 driver supports the Everex EV-235 Ultragraphics 
1664x1200 mode.

Files included:
	EV235.DRV    - 1664x1200 driver
	EV235X4.GR3  - 1664x1200 grabber
	OEMSETUP.INF - OEM Setup information
	EVSETUP.EXE  - Installation program for Everex Windows drivers
	README       - This file.

WARNING : This is purely a beta driver and some internal testing has been 
          done, but some 'REAL LIFE' testing may be needed. EVEREX Systems 
          isn't responsible for any losses due to this driver. If you find
          any incompatibilities or bugs in these drivers, please leave a 
          message for me on the Everex BBS (510) 226-9694.

         INSTRUCTIONS  FOR  INSTALLING  EVEREX  WINDOWS 3.0  DRIVERS
*****************************************************************************
Step 1 - Install Windows 3.0 on your system if it is not already installed.

Step 2 - Copy the Windows 3.0 drivers onto a blank formated diskette.
         Go to the hard disk which contains Windows 3.0, and change to 
         the Windows 3.0 directory.  For example: CD \WIN3.

Step 3 - Insert the diskette containing the Everex Windows 3.0 driver into
         drive A.  Run the EVSETUP program to install the Everex Windows 
         3.0 drivers. At the DOS type:
         A:\WIN3\EVSETUP and hit <ENTER> key.

Step 4 - EVSETUP program will ask you if you want to copy the Everex drivers
         to your hard disk, where Windows 3.0 is installed, answer yes by
         typing in "y".

Step 5 - Run Windows 3.0 SETUP by typing in "setup" at the DOS prompt and
         hitting ENTER key.

Step 6 - When SETUP program displays your current configuration, use arrow
         keys to highlight the "Display:...."  line then hit ENTER key.  A
         list of display options appears on your screen.

Step 7 - Use arrow keys to highlight to the desired driver and hit ENTER key.
         Hit ENTER again (at the "Accept the configuration shown above" line)
         to accept the configuration as shown and exit the Windows SETUP
         program.

         When selecting an Ultragraphics resolution, you must also select
         what type of video card you have co-existing with the Ultragraphics
         card, if any, or if its a stand alone. For example, if you and a VGA 
         card co-existing with the Ultragraphics, you would select:
         Everex Ultragraphics 1664x1200 w/VGA

Step 8 - Windows is now configured to run in your selected video resolution.
*****************************************************************************