Vision68 README.TXT
===================

1. Galileo Screen Control Utility
   ==============================
   When using the Screen Control utility, do NOT elect to update
   the current driver unless you have received a new S3 driver
   diskette. The original drivers included with the S3 accelerator
   card are stored on diskette in a compressed format that cannot 
   be read by Microsoft Windows or the Galileo utility.

   If you experience any problems with the Galileo utility, use the
   Windows Setup program instead, and check periodically with your
   dealer on the availability of an updated version. 

2. Using the Windows SETUP Program to Change Drivers
   =================================================
   If you use the Windows SETUP program to switch among S3 drivers
   (either in Windows or from the DOS command line), always elect
   to use the CURRENT installed driver unless you have a new
   S3 Windows driver diskette. If you need to re-install the original
   drivers included with the your board, run the WinSetup program on
   the diskette included with your Vision68 card.

3. Chinese/Japanese/Korean/Thai Edition of Windows
   ===============================================
   If you use an Asian language edition of Windows, do NOT use the Galileo
   Screen Control utility to switch among drivers. To ensure correct
   configuration information is written to your INI files, use the
   Windows Setup program to change resolutions and color depths instead.