YN
Adaptec Initial Array Configuration Utility Ver 1.51
^Display SCSI Devices  
Esc = Return to previous menu.  F1 = Help toggle.
Select Array #^1    
Select Array #^2    
Select Array #^3    
Select Array #^4    
This array has not been configured.
Assign ^Unit Numbers  
Adaptec ^SCSISelect   
Disk ^Array Functions 
This utility can only be executed from a bootable diskette in A:. Rebootyour system with a bootable diskette in drive A:.
Scanning for host adapter/drive information. Please wait.
Array Menu
Installation complete.
Disk array drive
Display ^Arrays        
Add ^New Array       
Do you want to continue? (y|n)  
^Delete Array       
Press any key to continue.
^Replace Array Drive
^Initialize Array   
Displays all devices current connected to the specified board.
Run SCSISelect utility to configure/examine SCSI Channel settings.
View, Add, Delete, Redefine, and Initialize Arrays.
Specify boot array/drive.

Up/Down:Move Up/Down
Enter  :Select Board
Esc    :Previous Menu
Array #%1
Aborted!       
 %1 complete 
^Display Array Status       
Define ^Spare Drives   
DOS ^Functions        
Starting SCSISelect for the %1 board.
AHA-3985
Run DOS Fdisk or DOS Format.
Copy ^Drivers
Copy NetWare or CD-ROM drivers.
^Update BIOS           
Downloads new BIOS to the specified board.
DOS ^Format            
Undefined
DOS F^DISK             
DOS Format with /s option.
DOS Fdisk to to edit partition table

Select ^Boot Option


     ^4KB 
     ^8KB     
    ^16KB     
    ^32KB     
    ^64KB     
   12^8KB     
^Accept Configuration  
^Return to Setup       
^Cancel Setup          
Specify the directory for CD-ROM Drivers installation: (e.g. C:ASPICD)
 
Enter the DOS drive to format:  
No Arrays Defined
Error in copying CD-ROM Drivers
Displays status information for all defined arrays. Information includes
array type, drive count, drive status, and status of any utility running on
the array.
Displays status information for the selected array. Information includes
array type, drive count, drive status, and status of any utility running
on the array.
Displays array drive count, drive status, and status of any utility
running on the array.
Display Array ^Drive Status 
Press any key to display the next array, or press the Esc key to exit.

Display ^Array Overview     
Displays general information about the selected array, such as array state,
array model, unformatted capacity, data block size, drive count, etc.
C9
BB
BA
CD
C8
BC
%1
DA
BF
B3
C4
C0
D9
DB
CF
Please wait
Do you want to exit the Adaptec Initial Array Configuration Utility (y|n) 
B0
Press Any Key
Directory path for NetWare Drivers installation : (e.g. C:NW) 

Formatting
^CD-ROM Drivers
NetWare ^3.xx Drivers
Copy CD-ROM drivers
Copy NetWare 3.xx Drivers in the directory that contains NetWare.
NetWare ^4.xx Drivers
Copy NetWare 4.xx Drivers in the directory that contains NetWare.
Drive Menu




Type = 
RAID0
RAID0 CVT
Mirrored
RAID3
RAID5 
RAID5 CVT
Uninitialized
State = 
Array #%1 is off-line.
At least one mirrored pair has a drive down.
Non-fault-tolerant
Fault-tolerant
Drives = %1
Spare Drive Count = %1
Array Physical Capacity = 
%1MB

GB

Data Block Size = 
%1KB

Drives available for assignment = %1
RAID Level   Min Drive Count  Max Drive Count  Comments
RAID0          2 (3 for CVT)   8               Non-fault-tolerant striped
RAID5          3               8               Fault-tolerant striped
Mirrored       2               16              Drive count must be even

How many members will array #%1 have (excluding spares)? 
Invalid entry. Valid range is %1 to %2.
Counts > 8 are for MIRRORED arrays only and must be an even number.
%1 drive(s) available.
Are you satisfied with your selections? (y|n)  
How many spare drives?  
No RAID Boards Found.
 If Array Configuration complete, restart the server using Ctrl+Alt+Del.
 Press any key to continue with Array Configuration
DOS Unit number for array #%1: 
DOS Unit Numbers can range from 80 to 87: 
Boot Array = Yes
You must assign members to this array before selecting the next array.
You must define at least one array before proceeding.
Array #%1
Spare too small.
I
                   
Up/Dn: Move Up/Down
Enter: Select Array
Esc  : Previous Menu
Up/Dn: Select Array
Enter: Display Array
Esc: Done
Up/Dn: Select Array
Enter: Delete Array
Esc: Done
Array #%1     
Arrays configured

Channel %1
Main Menu
Operation disallowed. Array Member is UP.  May result in Data Loss.
Up/Dn: Select Array
Enter: Redefine Array
Esc: Done
Up/Dn: Select Array
Enter: Initialize Array
Esc: Done
Array Size(MB) = %1
Boot Array = No
Data Block Size(KB) = %1
This array is not the proper RAID level for this function.
Array Status = Online
Array Status = Offline
Reboot the system using Ctrl+Alt+Del Keys
This array may have valid Data.  Continue with Formatting.(Y/N)
If you want to still continue, choose the Yes option.


Up/Dn: Move Up/Down
Enter: Select Drive
Esc  : Previous Menu
Array cannot be Initialized.  Some members of Array are not found.

Spare  #%1
Member #%1
Replacement Drive too small
Drive may have valid Operating System Partitions.
This Drive has valid Partition Table. Continue(Y/N). 










Some Arrays have changed Configurations. Accept (Y/N). 
Be Sure to check the new array configuration before accepting it.
 Arrays Members have moved from original location. Before exiting ARCONFIG
 be sure to take a look at the new configurations.
Invalid entry.
Maximum number of arrays already configured.
^Add an Array               
 Incomplete Arrays Found.  Before exiting ARCONFIG be sure to use
 Replace Array Member or Delete Array Functions to fix these problems.
Used to add an array. Maximum allowable array count is 4.
^Delete an Array            

Deletes the specified array from your system.
Unable to access drive #%1.






Configuration for Array #%1
Uninitialized

Member  SCSI ID  Channel     Status    Capacity
Spare%1
Failed to respond
Marked DOWN
   Reconstruct Needed
  Replacement Needed
  DOWN    
   UP     
%1MB
GB
Side
Mirror
Primary
Secondary
#%1
The SCSI Read Capacity command for spare #%1 failed.

Unknown error #%1 occurred.






Writing Zeroes to Array is ...%1 complete.



I/O error occurred

while processing Adaptec command #%1.











Tab: Select channel
Up/Dn: Select drive
Ins: Install drive
Del: Deselect drive
Spares are extra drives that are dedicated to this array to be
automatically used if a drive fails.
Do you want to define spares for array #%1? (y|n)  
Each array may have up to %1 spares.
Maximum allowable spare count is %1.
SPARE #%1  
System Configured to Boot off Single Drive.
Array # = %1
Copy NetWare Drivers in %1 Directory? (y|n) 
Choose No option to specify your own path
Do you want to boot off an Array? (y|n) 
If you want to boot off a Single Drive, select the No option.
Change Array ^Configuration 

Takes few minutes to several hours, depending on hard disk type.
^Redefine an Array          
Used to redefine the drives in an existing array.

This Drive has a valid partition table.
If you do not want to use this drive, choose No option
Add ^Spare Drive(s)         
This array already has the maximum number of spares.
This function is used to add a spare to an existing array.


Drive


Are you sure that you want to delete this array. (y/n) :
If you delete this array, all information on this array will be lost.
Size
Manufacturer
Chn
ID
Type
Drives
Created
Verified
Reconstructed






 Array #   Member    SCSI ID    Channel      Status















Bus #%1
















#%1 %2 %3
SCSI IDs on Channel
 #%1       %2     %3
Array #%1     
Array #%1 Initialized 
on PCI Bus #%1
 #%1%2     %3      %4
Bus #=%1  Channel=%2  SCSI ID=%3
^Redefine an Array          
Array #%1,Spare #%2



Init Menu

Array is initialized with all Zeroes.
This Initialization method is faster than low-level formatting.
Low-Level ^Format an Array  
Each drive in the array will be sent a SCSI Format command. This should
be used only if the drives in the array REQUIRE a SCSI Format command.
Improper drive count for this type of array.
Initialize to RAID^5        


^Initialize an Array    
Initialize to RAID5 C^VT    



Initialize to RAID0 ^CVT    


Initialize to RAID^0        


Mirrored arrays must consist of an even number of members.
Initialize to ^Mirrored     



Are you sure? (y|n)
Unable to access drive #%1.

Array #%1 deleted.
Member of Array #%1 replaced.
Array #%1 marked bootable.
Initialization of Array #%1 is complete.
Low-level formatting of array #%1 is complete.
Formatting  Array  #%1. 
Writing system sectors... 
Writing reserved sectors... 
CD-ROM Drivers copied. Update config.sys to include CD-ROM Drivers.
Array Model = %1
NetWare Drivers installed. Update startup.ncf to include NetWare Drivers.
%1
Put the Drivers diskette in floppy drive a:
SCSI IO Error. Check the SCSI Configuration and run arconfig again.









Are you sure you want to delete array #%1? (y|n) 













Use Up/Down Arrow keys to select drive; Enter to execute; Esc to quit.
The Format command failed on drive #%1.







Elapsed time %1


Initializing all blocks on array #%1 to zero ... %2 complete.

A SCSI Inquiry command failed.
Product(%1) Page(0x%2) 

A SCSI Mode Sense command to a drive in the disk array has failed.

The Read Capacity command for drive #%1 failed.
A SCSI Mode Select command to a drive in the disk array failed.
Offset(%1) Val(0x%2)










Accept default or refer to the array user's manual for further details.
Do you want to specify a new data block size? (y|n) 
%1KB

16 KB

Cannot open %1.





















































%1 





WARNING







Delete Array
Array #^1
Array #^2
Array #^3
Array #^4




Select Unit
Unit #%1     
Up/Dn: Move Up/Down
Enter: Select Unit
Esc  : Previous Menu





Initialize ^Logical Arrays   

Format Logical ^Arrays      

Select Array
Array Status
Array State = 
Array Substate = 
UNKNOWN
Number of members = %1
Spare drive %1 status = 
UP
marked DOWN


Adaptec disk array #%d has DOWN drive(s).






Member %1 status = 





      %1         %2        %3         %4          
    %1         %2         %3          %4          DOWN























Select Array Type
DOS Menu
^Low-Level Format              
Initialize Array to ^Zero      
RAID^0           
RAID0 ^CVT       
^Mirrored        
RAID^5           
RAID5 C^VT       
Select Initialize Mode

Array %1
All data on this array will be lost! Do you want to continue? (y|n) 





Creation date = %1






F1 = Help toggle
Arrow Keys or Hot Key = Select menu item
Esc = Quit menu

Invalid drive count for array type chosen.
System Menu
The data block size for fault-tolerant arrays is the stripe size of both
data and parity blocks. The data block size for RAID0 arrays is the stripe
size of the data block.
Invalid Adaptec disk array model number of %1 for command %2.
Not enough drives to configure any RAID level.
AHA-3980 Two Channel RAID
Athena
Viking II
Off-line

Operational with DOWN member(s).
Next DOWN member puts array off-line.


Adaptec Disk Array Installation Utility














Configuration Menu





Do you want to allow this array to be converted to and from RAID0_CVT
for specific applications? (y|n)  
Do you want to allow this array to be converted to and from RAID5_CVT
for specific applications? (y|n)  


Type=
Drive  Channel  ID
Spare  Channel  ID







Array #%1=%2

                




































Inquiry command failed.
Read Capacity command failed.















Array #%1,Member #%2

Tab: Select channel
Up/Dn: Select drive
Display Host ^Adapter Drives


Tab: Select Channel
Esc: Done







Configuration change implemented.
Adaptec disk array configuration changed.
Conversion to RAID0_CVT is useful for expediting massive data transfers to
the array, such as restoring an array from tape backup. After
transferring the data, you can convert the array back to the
safer RAID5 CVT type.

Conversion to RAID0_CVT is useful for expediting massive data transfers to
the array, such as restoring an array from tape backup. After
transferring the data, you can convert the array back to the
safer RAID5 CVT type.















AHA-3985 Three Channel RAID


%s  Bus #%d
RAID Boards