******* Updating your system BIOS by AMIFLASH.COM ********

  There are three files contain in subdirectory \BIOS of this diskette.

  AMIFLASH.COM == AMI Flash Utility
  539AIP13.ROM == HOT-539 AMI BIOS ROM file
  433AIP15.ROM == HOT-433 AMI BIOS ROM file
  README       == This readme file

***********************************************************************
*                                                                     *
*                           Warning !                                 *
*                         =============                               *
*                                                                     *
*    1. Flash EEPROM provides you a convenient way to update your     *
*       system BIOS, please note that updating your system BIOS       *
*       is serious, only update when you need to do it. Un-necessary  *
*       updating cause malfunction of the system are not cover        *
*       within the warranty.                                          *
*                                                                     *
*    2. Please make sure identify the mother board which you own,     *
*       never updating wrong BIOS ROM file to your mother board       *
*       or it may cause damage to your system.                        *
*                                                                     *
*                                                                     *
***********************************************************************


  (1) Boot your system from MS-DOS system diskette which contains no
      CONFIG.SYS and AUTOEXEC.BAT files.

      Note: FLASH.EXE can't work under protected mode/virtual mode.
            Memory manager like QEMM386, EMM386, 386MAX should not be
            loaded.

  (2) Insert disk in floppy drive A, and change directory to \BIOS.

  (3) Type "AMIFLASH 433AIP15.ROM" or "AMIFLASH 539AIP13.ROM"
      (dependent on which mother board are using), then press "ENTER".

  (4) The AMIFLASH.EXE can support SST 5V FLASH and Winbond 5V EEPROM.

  (5) Press any key to exit when updating is completed.

  (6) Turn OFF power and restart system again.

**************************************************************************
*                                                                        *
*                              Warning !                                 *
*                            =============                               *
*                                                                        *
*    Using incorrect or unauthorized BIOS file might cause BIOS          *
*    damage which the system can not be rescued from floppy anymore.     *
*                                                                        *
**************************************************************************