*** ARTOP ATP8400 IDE cache controller

1. INSTALLING Windows NT DRIVERS
----------------------------------

* ATP8400A.SYS is designed for Microsoft windows NT  miniport drivers.
  This driver allows connection of IDE hard disk and ATAPI CDROM.

* ATP8400i.SYS is designed for Microsoft windows NT  miniport drivers.
  This driver allows to connection  IDE ATAPI CDROM  on IDE-3 channel.


  (1) Use the COPY command to copy the device drivers from the \WINNT directory
      on the drivers diskette to root directory.

        COPY A:\WINNT\*.* B:\

      or 

        COPY B:\WINNT\*.* A:\


  (2) Insert Windows NT boot disk and boot from floppy disk.

  (3) On the Setup Method screen, choose "custom setup".

  (4) The installation program will then scan for SCSI adapters.

  (5) A screen will display the SCSI adpaters found. Choose "S" to configure
      additional SCSI adapters.

  (6) Move the highlight bar to "Other" and press "Enter"

  (7) When prompted, insert the driver disk prepared by step (1).

  (8) The ARTOP Miniport driver should be highlighted. Press Enter to proceed.

  (9) NT should now recognize the ARTOP Miniport driver and the IDE hardware.
      Then Please follow the Microsoft Windows NT installation procedure.