ARTOP IDE cache OS/2 Driver install example :

*** System configuration
    Main board : Intel P54c-100 CPU
                 SiS 551x chip set
                 8 MB memory
    IDE controller : ARTOP PCI IDE cache (AEC6620)
                 ROM address : C8000
                 I/O port : 168h
                 IRQ      : 11
    Hard disk : Quantum  LPS540AT (install on channel IDE-2 Master)
    CD-ROM    : Wearnes  CDD-120  (install on channel IDE-1 Master)

    OS : OS/2 Warp 3.0 CD-ROM English version.
         [DISK 0] Installation Diskette for CD-ROM 
         [DISK 1] Diskette for CD-ROM

* config.sys of [DISK 1] (Diskette for CD-ROM)

basedev=atp8400a.add  /v
buffers=32
iopl=yes
memman=swap,delayswap
protshell=sysinst1.exe
set os2_shell=sysinst2.exe
diskcache=D2,LW
protectonly=yes
libpath=.;\;\os2\dll;\os2\install;
ifs=hpfs.ifs /c:64
pauseonerror=no
codepage=850
devinfo=kbd,us,keyboard.dcp
devinfo=scr,ega,vtbl850.dcp
device=\dos.sys
device=\mouse.sys
set path=\;\os2;\os2\system;\os2\install
set dpath=\;\os2;\os2\system;\os2\install
set keys=on
basedev=print01.sys
basedev=ibmkbd.sys
basedev=ibm1flpy.add
basedev=ibm1s506.add
basedev=ibm2flpy.add
basedev=ibm2adsk.add
basedev=ibm2scsi.add
basedev=ibmint13.i13
basedev=os2dasd.dmd
device=\testcfg.sys
basedev=xdfloppy.flt

set os2_shell=cdinst.exe
set saveconnect=1
set cdrominst=1
ifs=cdfs.ifs /q
basedev=aha152x.add
basedev=aha154x.add
basedev=aha164x.add
basedev=aha174x.add
basedev=aic7770.add
basedev=aic7870.add
basedev=btscsi.add
basedev=fd16-700.add
basedev=fd8xx.add
basedev=fd7000ex.add
basedev=dpt20xx.add
basedev=chincds1.flt
basedev=hitcds1.flt
basedev=neccds1.flt
basedev=sonycds1.flt
basedev=toshcds1.flt
basedev=ibmidecd.flt
basedev=tmv1scsi.add
basedev=sony535.add
basedev=sony31a.add
basedev=lms206.add
basedev=mitfx001.add
basedev=sbcd2.add
device=\os2cdrom.dmd


* Install procedure

     1. Make a copy of OS/2 ver 2.x or Warp 3.x [Disk 1].
     2. Copy ARTOP IDE cache driver (ATP8400A.ADD) to [Disk 1].
     3. Edit the CONFIG.SYS of [Disk 1] (Diskette 1 copied) and
        add a statement on first line as follows :

        BASEDEV=ATP8400A.add

     3. Check Computer system and ARTOP IDE cache Adapter.
     4. Insert OS/2 [Disk 0] (Install diskette for CD-ROM) then 
        Power on your System.
     5. Insert OS/2 [Disk 1] (Diskette for CD-ROM) then continue.
     6. Start install program and Follow OS/2 standard install procdeure.
     7. While installation is complete 
     8. Boot OS/2 system from Hard disk.