ARTOP netware IDE cache driver for ATP8400A

  ATP8400A.DSK  suport NetWare 386 v3.1x and v4.0x IDE disk module
upto 16 IDE hard disks.


:load ATP8400A port=1f0 irq=e mem=c8000

*I/O port :
  port=1f0 => I/O port 1f0-1f7
  port=170 => I/O port 170-177
  port=1e8 => I/O port 1e8-1ef
  port=168 => I/O port 168-16f

*IRQ :
  irq=e =>  interrupt request 14
  irq=f =>  interrupt request 15
  irq=a =>  interrupt request 10
  irq=b =>  interrupt request 11
  irq=c =>  interrupt request 12

*ROM Address:
  mem=c8000 => Rom address c8000-cbfff
  mem=cc000 => Rom address cc000-cffff
  mem=d8000 => Rom address d8000-dbfff
  mem=dc000 => Rom address dc000-dffff

Example <A>
  OS      : Netware 3.12(Diskette)
  System  : 486-66 with 8 MB memory
  Fdd     : 1.44 MB(Drive A)
  Hdd     : corner 1.2 GB IDE hard disk(Drive C)
  Lan card: WD8003 compatible Ethernet
  Install procedure
     1. Make a small DOS partiton(20 MB).
     2. Make a directory c:\server.312
     3. Copy ARTOP IDE Cache driver(ATP8400A.dsk) to directory c:\server.312 .
     4. copy lan driver WD31.lan to c:\server.312
     5. Insert Netware 3.12 Install Diskette and Run Install from Drive A:
     6. Follow Netware 3.12 procedure then into Netware Command line prompt.
     7. Load ATP8400A.DSK from Drive c:\netware.312\ATP8400A.DSK .
         :load c:\netware.312\ATP8400A <Enter>
     8. Load Lan driver WD31.lan
         :load c:\netware.312\wd31
         :bind ipx to wd31
     9. Load Install
     10.Partiton a Netware partition.
     11.Create a Netware SYS: volume  and mount SYS:.
     12.Follow Netware Installation guide
        Copy Netware System file and utility
     13.Create file Startup.ncf and autoexec.ncf


Example <B>
  OS      : Netware 4.00(CDROM)
  System  : 486-66 with 16 MB memory
  Fdd     : 1.44 MB(Drive A)
  Hdd     : WD 1.0 GB IDE (Drive C)
  CDROM   : SONY CDU-521(Drive D on ARTOP SCSI-2)
  Lan card: NE2000 compatible Ethernet

     1. Make a small DOS partiton(20 MB).
     2. Make a directory c:\server.40
     3. Install CDROM drive as a MSDOS drive D:
     4. Insert Netware 4.0 CDROM diskette.
     5. Copy ARTOP IDE cache driver(ATP8400A.dsk) to directory c:\server.40
     6. load CDROM driver.(AECSCSI.DSK)
     7. Change directory to \netware.40\english then run INSTALL.BAT
     8. Give server name and IPX number then follow install guide.
     9. Select Load another(different) driver then press <Ins>,<F3>
         select directory c:\server.40
         then select ATP8400A.DSK  (I/O port 1F0h)
     10. Then continue to install.
     11. Then Select automatically to install Hdd partition.
     12. Select <F10> to save Volume.
     13. Then you need insert [LICESE] floppy diskette.
     14. Select <Alt><F10> exit to Netware command prompt.
     15. Load and mount CDROM.
     16. Load c:\netware.40\instll
     17. Select Install a new V4.0 server.
     18. Select <F3> to enter Directory CDVOL01:\netware.40\english
     19. Follow Novell install guide to continue next procedure.