******** Install Windows NT 3.5 ATAPI Driver (IDE CDROM Support) ********

    This driver is for Windows NT 3.5 and after version. It does not support
    NT 3.1.
    The driver is provided on diskette of your DC5030 package.

    Please follow the steps below to install the Windows NT 3.5 driver:

    (This driver support ATAPI. In DC5030 you need to connect your
     CDROM to ISA-IDE bus.)

Promise Technology Inc. IDE ATAPI Cache Adapter Driver Installation
-------------------------------------------------------------------

1) From the Program Manager, double click on "Windows NT Setup" icon in
   the Main group.

2) Select "Options/Add/Remove SCSI Adapters..."

3) Click on "Add" then warning dialog will appear and Click "OK".

4) The "Select SCSI Adapter Option" dialog will appear; select
   "Other (Requires a disk from a hardware manufacturer)" from the
   "Adapter:" list box.

5) Next, the "Insert Diskette" dialogbox will appear; insert the Promise
   driver disk into Drive A: and type "A:\" into dialogbox.

6) Next, the "Select OEM Option" dialogbox will appear; select
   "Promise Technology Inc. IDE ATAPI Cache Adapter" and click "OK".

7) Next the "Select SCSI Adapter Option" dialogbox will appear; click on
   the "Install" button in the dialogbox.

8) If installation is successful, the "SCSI Adapter Setup" dialogbox will
   reappear, and "Promise Technology Inc. IDE ATAPI Cache Adapter" will be
   listed as an installed driver.

9) Reboot your system to load the Promise Cache IDE ATAPI driver.