AMD Calculator v1.0.0.8 for Windows XP
Ed Wilk / Edgemeal Software

Setup:
Start the AMD Calc and adjust the top 4 values to your systems stock settings.
Adjust all other values where needed to figure your overclocking percentages.
By default the calc starts with the Installed Ram and Ram Divider set to 200 for PC3200(DDR400).

Option Buttons:
[Copy] - Copies the data to the windows clipboard.
[ + ] - This button has two functions using a single mouse click,
Left click appends the data to the results.txt file,
Right click opens the results.txt file in NotePad.

CPU Detection:
The detected CPU MHz is what Windows detects during boot up and may have been rounded off, you can fine tune this by clicking on this value with your mouse, left click to add,  right click to subtract.

When overclocking the OC CLK will be adjusted to reflect the detected CPU MHz divided by the default CPU multiplier for a limited number socket 939  CPUs including the AMD Opteron, FX and X2.

Special Thanks To:
Greyhound & CouGaR  @  http://forums.amd.com/
Anandtech  http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2469&p=2
AMD  http://www.amd.com


Trademarks:
AMD, the AMD Arrow logo, AMD Athlon, AMD Opteron, AMD Sempron, AMD Turion 64 and combinations thereof are trademarks of Advanced Micro Devices, Inc. Microsoft is a registered trademarks of Microsoft Corporation. Other names used are for identification purposes only and may be trademarks of their respective owners.

Disclaimer:
Users of this software must accept this disclaimer of warranty:
The software is supplied as is. The author disclaims all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The author assumes no liability for damages, direct or consequential, which may result from the use of this software.