HOW TO MAKE A 10 FOOT LONG LAPLINK CABLE 

 
     1 PIECE OF FLAT RIBBON CABLE 10 FT LONG WITH 25 WIRES
     GROUND ALL UNUSED WIRED TO GROUND SHIELD ON BOTH ENDS
     2 DB 25 PRINTER PLUGS                       ---------
      
     CONNECT THE FOLLOWING:

     1 TO  GROUND
     2 TO  15
     3 TO  13
     4 TO  12
     5 TO  10
     6 TO  11
     7 TO  GROUND
     8 TO  GROUND
     9 TO  GROUND
     10 TO 5
     11 TO 6
     12 TO 4
     13 TO 3
     14 TO GROUND
     15 TO 2
     16 TO GROUND
     17 TO GROUND
     18 TO GROUND
     19 TO GROUND
     20 TO GROUND
     21 TO GROUND
     22 TO GROUND
     23 TO GROUND
     24 TO GROUND
     25 TO 25