                     ************************************
                     *  Mocha W32 PPP version 3.02      *
                     *     Copyright (C) MochaSoft      *
                     *       All Rights Reserved        *
                     ************************************
 
This is the README.TXT  file for Mocha W32 PPP

Mocha W32 PPP can be used to connect your PalmPilot or CE device
to a Windows-95/98 directly through a serial cable or the Hot-Sync 
adapter, giving direct access to the network (Internet) on your local PC.

With Mocha W32 PPP you will not need a modem to use TCP/IP applications, 
which come in very handy since you don't need to be on the phone all day. 

           

          Internet -------------------------------------
          or LAN              l
                              l
                              l
                     -----------------
                     -               -           -----------
                     -  Windows-PC   -           -         -
                     -               -===========- hotsync -
                     - MOCHA W32 PPP -           - cradle  -
                     -----------------           -         -
                                                 -----------
                                                      =
                                                      =
                                                   ---------
                                                   -       -
                                                   - palm  -
          With this configuration your             - pilot -
          Palm Pilot can access the Internet       -       -
          and run a WWW browser as Avantgo,        -       -
          POP mail, WAP Browser or other           ---------
          TCP/IP applications.


Highlights: 
    - Easy to configure
    - Can stop/start HotSync, making it possible to use
      the same COM port.
    - Has been tested on Palm OS 3.0 - 3.3 and CE versiom 2.0
    - Can log data traffic to a file in ASCII format.
    - Can run as an icon in the tray.
    - Supports TCP and UDP data traffic. 
    - Uses the windows-95/98 PC's IP address and DNS system, 
      making it easy to install the product. 
    - Possible to use COM1 - COM8

Limitations:

    - Can use a baud rate of 57.600 with a palmPilot. 
      We have seen some problems
      with a baud rate of 115.200, and has selected not to allow
      such a speed in the product. The real data speed is also
      lower, as the PalmPilot has a very slow packet ACK response time.
    - Computers on the Internet cannot see the PalmPilot, as it uses
      the same IP address as the PC running Mocha W32 PPP. Therefore an
      application as FTP will not work.

*** Order ***
    
    Visit www.mochasoft.dk for latest information. You can order with
    Credit card or a check.
    
    A single user license is only 9.95 USD

    For ordering information, please check www.mochasoft.dk, 
    or see file register.txt in this package.
    
    *** Installation ***
     
    - unpack files with a zip utility, into a temporary directory.
    - load program setup.exe and follow the instructions.

*** How to configure PPP on the PalmPilot (OS 3.0 and 3.1) ***
    
    On the PalmPilot in the Preferences, Network: 
    
    Use the UUNet Service or create a new service, where 
    
    Password : Prompt
    Phone : 00
    
    
    Details:
    Connection type PPP
    Primary/Secondary DNS : Blank
    IP Address : Automatic
    
        
        Script: 
    End ( no script)
    
    
    As default the PalmPilot will use 19200 as baud rate 
    
    

*** How to configure PPP on the PalmPilot (OS 3.2/3.3) ***

    On the PalmPilot in the Preferences, Network: 
    
    Use the UUNet Service or create a new service, where 
    
    Password : Prompt
    Connection : Direct Serial
    
    
    Connection type : PPP
    Query DNS : yes
    IP Address (yes) Automatic
    
    
    Script: 
    End ( no script)
    
    
    On the PalmPilot in the Preferences, Connection: 
    
    Direct Serial
    Connection Method : Serial to PC
    Speed : (same speed as for mocha w32 TN5250)
    Flow Ctl : Automatic 
    
*** How to configure Windows CE 2.x ***
    
    Mocha W32 PPP can used with Microsoft ActiveSync version 3.1. 
    
    On the CE device:
    
    CE device without a keyboard:
    
    Select Start - Settings - Communication - PC Connection, and change 
    the connection speed to 57600 or 115k.
    
    CE device with a keyboard:
    
    1) Select Start - Settings - Control panel
    
    2) Select Communication - PC Connection, and change the connection speed 
    to either 57600 or 115k.
    
    On the PC:
    
    In Microsoft ActiveSync : menu - file - connection setup, enable :
    
    ( X ) Allow network (Ethernet) and Remote Access Service (RAS) server 
          connection with this desktop computer.
    
    Disable:
    
    ( ) Allow serial cable or infrared connnection to this COM port.
    


    
    The most common problem with the configuration is to remember to select 
    the same baud rate for Mocha W32 PPP and the PalmPilot PPP. 
    Please check the baud rate before contacting Mochasoft support! 


*** Uninstallation ***

    Use Windows tool "Add/Remove Programs" in the Control Panel. Select
    Mocha W32 PPP and click Add/Remove.

*** Documentation ***

    The documentation has been included in the Window Help
    system. Select Help in the menu.

*** Bugs ***

  If any bugs are observed, or ideas for improvement of the product,
  please to not hesitate to contact frydendal@mochasoft.dk.

*** Change list ***

version 1.0 : 991027

  First version. Freeware

version 2.0 000317
  - shareware version
  - product has been re-written 
    - new user interface
    - support for UDP (use it with a WAP browser)
    - new internal data handling. Solves the program, where the program
      does not response to anything, which was very common in
      in version 1.0
    - tray mode support
    - COM5 - COM8 can be used
    - can start/stop hotsync program

version 2.1 000321
 - problem with ProxyWeb application has been solved (timing issue)
 - not possible to change the log file name

version 2.2 000324
 - correct problem with PQA applications. To run PQA applications, you will
   need a few files from a real Palm VII:

    Weblibrary.prc
    iNetLib.prc
    Wireless.prc
    WebClipping.prc
    SecurityLibrary.prc

   These files cannot be downloaded from our web site.

version 3.01 000526
 - correct problems in TCP giving retransmissions
 - corrected problem with many open TCP sessions
 - support for CE devices
 - new license system and price structure

version 3.02 000607
 - corrected problem with many retransmissions on CE
 - icon in the tray display data traffic

The Mocha W32 PPP package consists of the following files.

    README.TXT          Introductory information
    setup.exe           Installation program (*)
    mppp.hlp            Help file
    mppp.cnt            Index to help file
    LICENSE.TXT         license agreement/warranty disclaimer
    REGISTER.TXT        order form

    (*) setup.exe will be renamed to
         
          mppp.exe : Mocha W32 PPP application
          mpppuninstall.exe : uninstallation program

    If you did not receive all these files please contact 
    frydendal@mochasoft.dk, or check www.mochasoft.dk
