Save "Save"
Object "Object"
Material "Material"
ObjErr "Object Error"
SelErr "Select Error"
GLErr "OpenGL Error"
D3DErr "Direct3D Error"
ReadErr "Read Error"
InsertErr "Insert Error"
NoObject "No object is selected."
NoMaterial "No material is selected."
FaceErr "No face is selected."
LockErr "Current object is locked."
Untitled "Untitled"
BasicMode "Now basic mode is set.\nUnimportant functions are hided."
NotRegSave "Only registered version can save."
NotRegExport "Only registered version can export."
GLFailSPF "Failed SetPixelFormat()."
GLFailwMC "Failed wglMakeCurrent()."
GLFailRend "Failed rendering with OpenGL."
D3DFailRend "Failed rendering with Direct3D."
LoadFileErr "Failed to load file."
NoObjInFile "No object in this file."
NeedSave "Document has changed.\nDo you want to save the changes?"
SaveFileErr "Failed to save file."
DelUsedMat "Current material is used.\nAre you sure to delete?"
DelAllMat "Are you sure to delete all materials?"
MergeMat "Are you sure to merge %1 into %2?"
ExistMat "%1 already exists."
MergeAllObj "Are you sure to merge all objects into %1?"
MergeObjDlg "Merge %1 into %2"
NoVertex "No vertex exists."
Help "Help"
NoHelp "Cannot find help file."
NotSize0 "Cannot set zero size."
NotLoadAscii "Cannot load a file of ASCII format."
PluginOverwrite	"%1 is already exists.\nAre you sure to overwrite?"
PlugInsSucceed "Succeeded to install."
PlugInsInvalid "Failed to install.\nMay be not plug-in."
PlugInsFail "Failed to install."

MatNoName "Material must be named."
MatSameName "Same named material exists."
MatIncName "Incorrect name."
ObjNoName "Object must be named."
ObjSameName "Same named object exists."

EditX "Enable to edit on X axis"
EditY "Enable to edit on Y axis"
EditZ "Enable to edit on Z axis"
EditH "Enable to edit on head angle"
EditP "Enable to edit on pich angle"
EditB "Enable to edit on bank angle"

SelTitle Select
SelNormal Normal
SelNormalHint ""
SelNormalMes "L=Select single  Shift+L=Select with drag"
SelJoin "Joined face"
SelJoinHint ""
SelJoinMes "L=Select vertex or face"
SelBelt Belt
SelBeltHint ""
SelBeltMes "L=Select line"
SelCurObj CurObj
SelCurObjHint "Set current object"
SelCurObjMes "L=Select vertex, line or face"

RectMes "L=Set range  Shift+L=Add selection  Ctrl+L=Subtract selection"

MoveTitle Move
MoveRel Rel
MoveRelHint "Relative coordinate"
MoveAbs Abs
MoveAbsHint "Absolute coordinate"
MoveMes "L=Select and move  Shift+L=Add selection"
MoveVertMes "Shift+L=Move horizonally or vertically  R=Snap at the other vertex"
MoveDragMes "Shift+L=Move horizonally or vertically"

ScaleTitle Scale
ScaleProportion "Proportion"
ScaleNum Number
ScaleMes "L=Select and scaling  Shift+L=Add selection"
ScaleMes2 "left/right=X  up/down=Y  R+left/right=Z  Shift:Proportionally"
RotTitle Rotate
RotBall "Rolling ball"
RotScreen Screen
RotX X-axis
RotY Y-axis
RotZ Z-axis
RotNum Number
RotMes "L=Select and rotate  Shift+L=Add selection"

UVTitle "UV Edit"
UVCheckU U
UVCheckV V
UVEditMes "L=Select and edit  Ctrl+L=Edit fast  Shift+L=Add selection"

MapTitle Mapping
MapSel "Select face"
MapMove Move
MapRotate Rotate
MapScale Scale
MapInvertU InvU
MapInvertV InvV
MapFitSel "Fit selected"
MapFitObj "Fit CurObj"
MapProp Property
MapOK OK
MapRealtime Realtime
MapSelMes "L=Select  Shift+L=Add selection"
MapMoveMes "L=Move"
MapRotMes "L=Rotate"
MapScaleMes "L=Scaling  Shift+L=Proportionally"
Mapping Mapping

PrimTitle Primitive
PrimProp Property
PrimCreate Create
PrimMes "L=Put primitive"

CreateTitle "Create Face"
CreateFront Front
CreateBack Back
CreateBoth Both
CreateLine Line
CreateTri Tri
CreateFace Face
CreateUndo Undo
CreateAdd Add
CreateMes "L=Add vertex  Ctrl+L=Snap at the nearest vertex"
CreateMes12 "L=Add vertex  Ctrl+L=Snap at the nearest vertex  R=Cancel"
CreateMes3 "L=Add vertex  Ctrl+L=Snap at the nearest vertex  R=Create a triangle"
Create Create
CreateBadPt "This point has already been selected."

DelMes "L=Delete face"

InvMes "L=Invert face"

ExtrdTitle Extrude
ExtrdNormal Normal
ExtrdBevel Bevel
ExtrdMes "L+left/right=Extrude face"

MatMes "L=Attach  Shift+L=Spoit"

PullFaceMes "L=Select line"

MagTitle Magnet
MagSel "Only selected"
MagRange "Range"
MagDrag "Set Range"
MagMes "L=Select vertex"
MagMes2 "L=Move  Ctrl+L=Move forward or backward"

TwistTitle Twist
TwistAxis "Set Axis"
TwistAxisMes "L=Move axis"
TwistTwist Twist
TwistTwistMes "L+left/right=Twist"
TwistProp Property

LatticeTitle Lattice
LatticeMove Move
LatticeMoveMes "L=Move"
LatticeScale Scale
LatticeScaleMes "L+left/right=X L+up/down=Y L+R+left/right=Z Shift+L=Proportionally"
LatticeModify Edit
LatticeProp Property

WireTitle Wire
WireCreate3Hint "Create a triangle"
WireCreate3Mes "L=Determine the beggining of a wire"
WireCreate3Mes2 "L=Determine the end of a wire"
WireCreate3Mes2V "L=Determine the end of a wire  R=Snap at a vertex"
WireCreate3Fail "Failed to create a triangle."
WireDivQuadHint "Divide a quadrangle into two triangles"
WireDivQuadMes "L=Determine the beggining of a wire"
WireDivQuadMes2 "L=Determine the end of a wire"
WireDivQuadFail "Failed to divide a quadrangle."
WireDivLineHint "Insert point in a line"
WireDivLineMes "L=Click a line you want to insert a point"
WireSwap3Hint "Swap a line two triangles share"
WireSwap3Mes "L=Click a line you want to swap"
WireTo4Hint "Merge two triangles into a quadrangle"
WireTo4Mes "L=Click a line you want to erase"

KnifeTitle Knife
KnifeKnife "Cut with a knife"
KnifeKnifeHint ""
KnifeKnifeMes "L=Determine the begining point of wire"
KnifeKnifeMes2 "L=Determine the end point of wire  Shift+L=Cut horizonally or vertically"
KnifeKnifeMove "L=Release at the end point of wire"
KnifeStraight "Cut straight faces"
KnifeStraightHint ""
KnifeStraightMes "L=Select a line to cut"
KnifeStraightMes2 "L=Determine the end point of wire"
KnifeChain "Erase chained lines"
KnifeChainHint ""
KnifeChainMes "L=Select a line to erase"
KnifeFail "Failed to cut."

WeitTitle Weit
WeitMes "L=Select vertex"

VColTitle "Vertex Color"
VColMes "L=Paint  Shift+L=Spoit  Ctrl+L=Eraser"

Blob Blob
BlobTitle Blob
BlobDel Delete
BlobCopy Copy
BlobMove Move
BlobRot Rotate
BlobScale Scale
BlobProp Property
BlobPoly Polygonise
BlobConfig Config
BlobPutMes "L=Put blob"
BlobDelMes "L=Delete blob"
BlobCopyMes "L=Copy blob"
BlobMoveMes "L=Move blob"
BlobRotMes "L=Rotate blob"
BlobScaleMes "L+left/right=X  L+up/down=Y  R+left/right=Z"
BlobPropMes "L=Select blob"
BlobNoBlob "No blob exists."
BlobFailPoly "Failed to polygonise blob."
BlobSize0 "Cannot set zero size."
BlobSphere Sphere
BlobCylinder Cylinder
BlobBox Box
BlobTorus Torus
BlobCone Cone
BlobPyramid Pyramid
BlobTube Tube
BlobRoundBox "Round Box"
BlobRoundCylinder "Round Cylinder"

PaintMes "L=Paint  Shift+L=Spoit color"

BkImgMes "L=Transform"
BkImgMoveMes "L=Move  Shift+L=Move horizonally or vertically"
BkImgEdgeMes "L=Resize"
BkImgCornerMes "L=Resize  Shift+L=Resize proportionally"

ViewTitle View
ViewZoom Zoom
ViewZoomMes "L+up/down=Zoom"
ViewMove Move
ViewMoveMes "L=Move"
ViewRotate Rotate
ViewRotateMes "L=Rotate  Shift+L=Rotate slowly"
ViewPers Perspective
ViewPersMes "L+up/down=Change perspective"
ViewDolly Dolly
ViewDollyMes "L+up/down=Dolly"

NoHidedFace "No hided face exists."
NoSelV "No selected vertex exists."
NoSelVF "No selected vertex and face exist."
No2VObj "Not select two vertices in the object."
NoFixVF "No fixed vertex and face exist."
MUnhide "Show hided faces"
MFix "Fix"
MUnfix "Unfix"

ShiftPos "Shift Position"
AlignVertex "Align Vertices"
AlignVertNoAxis "No axis is selected."
JoinClosed "Join Closed Vertices"
JoinClosedResult "%1 vertices have been joined."
JoinClosedFail "No vertex has been joined."
Freeze "Freeze"
FreezeFail "%1 isn't attached any attributes to freeze."
ReducePoly "Reduce Polygons"
ReducePoly4V "More than four vertices must exist."
AlignFace "Align faces"
AlignFaceResult "%1 faces were inverted."
AlignFaceFail "Faces in current object have aligned already."
PiledFace "Delete piled faces"
PiledFaceResult "%1 faces were deleted."
PiledFaceFail "No piled faces in current object."
UnifyFace "Unify Faces"
UnifyFaceResult "%1 faces were deleted."
UnifyFaceFail "No both sides of face exists in current object."
AttachMat "Attach to face attached no material"
AttachMatFail "All faces in current object are attached materials."
RegComp "Complete registering."
RegFail "Incorrect serial-ID or password."
RegClear "Are you sure to clear registration?"

PaintPanel "Paint Panel"
MapSave	"Mapping bitmaps have changed.\nDo you want to save changes?"
NoMapping1 "No mapping in current material."
NoMapping2 ""
PaintBegin "Are you sure to begin drawing?"
MapReload "Are you sure to reload mappings?"
MapFailCopy "Failed to copy mapping bitmaps to clipboard."
MapFailPaste "Failed to paste mapping bitmaps from clipboard."
MapUnifySize "Several sizes of mapping bitmaps exist.\nAre you sure to unify size?"
MapChgedSize "Sizes of mapping bitmaps are changed.\nAre you sure to continue?"
MapFSTex "Failed to save texture mapping."
MapFSAlpha "Failed to save alpha mapping."
MapFSBump "Failed to save bump mapping."

ColorPalette	"Color Palette"
ColPalLoadFail "Failed to load the file of color palette."
ColPalSaveFail "Failed to save the file of color palette."
