INSTALLING ICONFORGE

Before you can begin using IconForge you must run its
Setup program from Windows. In most cases you cannot simply copy
the software onto your hard drive. The files on the CursorArts
distribution disks are stored in a special compressed form to
save space. The Setup program is the only way to insure that
IconForge is properly unpacked and installed. To install
IconForge, follow the steps below:

1.  Start Windows.

2.  If you received IconForge on diskette, place it into
    the floppy drive now. If you downloaded IconForge in
    archived format, use PKUNZIP to uncompress the files to a
    working directory on your hard disk.

3.  Activate the Windows Program Manager or Explorer.

4.  Select "Run..." from the "Start" menu.

5.  In the "Command Line" field enter one of the following:

      -  If you placed the IconForge diskette into drive
         A:, type: A:\SETUP_32 to install the 32-bit verions (Win
         95/98 or NT4) or A:\SETUP_16 to install the Win 3.1x version.

      -  If you downloaded IconForge, type:
         C:\DIRNAME\SETUP_32 for the Win 95/98/NT4 version, or
         C:\DIRNAME\SETUP_16 for the Win 3.1x version (Remember to
         replace DIRNAME with the name of the directory where you
         uncompressed IconForge's files.)

6.  Follow the instructions on the screen.


----------------------------------------
UNINSTALLING / REMOVING FROM YOUR SYSTEM
----------------------------------------
If you decide that you no longer wish to use IconForge, you need
only to use the UNINSTAL.EXE program placed in IconForge's directory
folder to remove its files from your system.

To remove any shortcuts to IconForge which you may have placed on
your Windows desktop, simply delete these by highlighting the link
icon and pressing your Delete key. To remove shortcuts on the
Windows Start menu, use your file manager to delete the ICONFORGE
directory folder which is located inside the
\WINDOWS\START MENU\PROGRAMS folder.


-------------------------------------
CUSTOMER SERVICES & TECHNICAL SUPPORT
-------------------------------------

CursorArts Company provides its registered software customers with
free technical support.

If you should encounter a technical problem or question not covered
in the manual or on-line help, you may use one of the following
avenues to obtain technical assistance:

MAIL POSTAL CORRESPONDENCE TO:
------------------------------
CursorArts Co.
Customer Support
P.O. Box 1379
Bend, OR 97709-1379

TELEPHONE SUPPORT:
------------------
Technical support and product update information are available
between the hours of 9:00 AM and 5:00 PM (Pacific Standard Time,
-8:00 GMT), Monday through Friday.

Please have the following information available for the support
staff when you call:

*   Brand name and model of your computer system, mouse, video
    adapter and monitor.

*   Operating system (DOS & Windows) version numbers.

*   A listing of the contents of your AUTOEXEC.BAT and CONFIG.SYS
    files.

*   A description of the problem, how it occurred, and how to
    reproduce it.

Telephone support may be obtained by calling (541) 383-7156. You
may also FAX your questions to (541) 388-7366.

INTERNET-BASED SERVICES:
----------------------------------
Technical support, updates, product information and evaluation
copies of all our products are available from the following on-line
services:

Internet E-Mail:
    tech@cursorarts.com

World Wide Web:
    http://www.cursorarts.com/

-----------------------------------------
LICENSE AND COPYRIGHT
-----------------------------------------
Your use of IconForge is governed by a License which appears before
you install IconForge and in the file SLICENSE.TXT on this disk. Please
read the license before you use IconForge.

-----------------------------------------
(C) CursorArts Co. 1997, 1999. All Rights Reserved.
This software and all accompanying documentation are protected by
both United States and International Copyright laws and treaties.

---------------------------------
OTHER GREAT PRODUCTS FROM CURSORARTS COMPANY
---------------------------------

Evaluation copies of most CursorArts products, including IconForge,
ImageForge, SecurDesk! and FileWrangler, can be obtained from various
vendors or downloaded from most major on-line services, as well as
from the Internet (http://www.cursorarts.com/). For additional
information, pricing or dealer information contact the CursorArts
Company Sales Department at (541) 383-7156.

-----------------------------------------
Thank you for supporting CursorArts Products!
