                     ************************************
                     *  Mocha W32 Telnet version 1.5.5  *
                     *     Copyright (C) MochaSoft      *
                     *       All Rights Reserved        *
                     ************************************
 
This is the README.TXT  file for Mocha W32 Telnet

Mocha W32 Telnet is an Windows 95/NT application. It makes it 
possible to connect to a host via TCP/IP with the Telnet protocol
and emulate a VT220 terminal.

*** Order ***
    
    Visit www.mochasoft.dk for latest information. You can order with
    Credit card or check/postal money order.

*** Installation ***

    - unpack files with a zip utility, into a temporary catalog.
    - load program setup.exe and follow instructions.

    If problems with the installation, copy all files to a new
    catalog and rename setup.exe to mtelnet.exe. Start Mocha W32
    Telnet with loading mtelnet.exe.

*** Uninstallation ***

    Use Windows tool "Add/Remove Programs" in the Control Panel. Select
    Mocha W32 Telnet and click Add/Remove.

*** Documentation ***

    The documentation has been included in the Window Help
    system. Select Help in the menu.

*** Bugs ***

  If any bugs are observed, or ideas for improvement of the product,
  please to not hesitate to contact frydendal@mochasoft.dk.

*** Change list ***

version 1.0:

  First version.

version 1.1:

  Following minor problems has been solved:

  a) LF is missing in paste buffer
  b) Proxy using wrong host name
  c) Cancel of installation is out of order
  d) Cannot accept large host names in the dialog box
  e) ALT F4 is not active
  f) Wrong catalog for map files, if mtelnet.exe was loaded as a link.
  g) /H parameter works only if (x) in dialog box

version 1.2

  Following problems has been solved:

  a) Auto connect could hang
  b) If closed as an icon, the program could not be started again
  c) More correct close of socket connection at program termination

version 1.3

  Following problems has been solved:

  a) added support for konfiguration of backspace.

version 1.4 971016

  a) added support for CTRL+C and CTRL+V as COPY/PASTE
  b) added Logfile option in File menu
  c) added restricted login parameters S1 and R1
  d) added TERMTYPE as a configuration option
  e) added Warning in menu : Reset Configuration 

version 1.4.1 971212
  
  a) added menu view - screen 132 mode. Use this option to force the
     screen between 24*80 and 24*132 line mode
  b) added menu font 24*132. Possible to select a new font setup for
     the 80 * 132 mode.

version 1.4.2 971212
  a) added parameter /N. Makes it possible to use another name
     in the title. Default name is the host id.
  b) /S1 parameter will now disable some menu items.

version 1.4.3 971228
  Not possible to use echo/autowrap or swap crlf
  from the menu (bug was created in version 1.4.2).

version 1.4.4 980129
  - problems with menu short cuts
  - If nettopc.map file contains [ mapping, escape commands from the
    host would fail
 
version 1.4.5 980130
  - Erase commands used current attribute.

version 1.4.6 980204
  - If nettopc.map file contains [ mapping, escape commands from the
    host would fail if the ESC character was send in one frame and 
    the [... in another
  - problem with shift between VT200 8 bit and 7 bit controls
  - new catalog box in setup.exe

version 1.4.7 980209
  - Problems as 1.4.6 with nettopc.map file and ESC characters have been 
    solved.

version 1.4.8 980324
  - added support for host printing (commands : CSI 4i CSI 5i and CSI i)

version 1.4.9 980514
  - auto connect password, was not turned off, when match was found
  - telnet local echo option was ignored

version 1.5.0 980611
 - Possible to call program from Netscape 4.x. Call syntax
   on html page is 
   <A href="telnet://myhost.com">telnet starts here</A>
 
   and in Netscape configuration for programs change URL:TELNET to
   "C:\Program Files\Mochasoft\mtelnet.exe" /H %1
 - FF in print command did not flush current line, and the last
   line on a printed page would be lost.

version 1.5.1 980612
 - the IAC WILL ECHO telnet option was not handled correct. 

version 1.5.2 980613
 - Corrected problems with host control of local echo
 - Added new menu option in settings. As default the host will
   not control the local echo state.

Version 1.5.3 980702
 - New function in menu setting: Blinking CUrsor
 - Possible to pre-install license key into the package. Include
   a file named LICTEL with the package with following contents:

     name=<company name>
     key=<license key>

     <> should not be included. 

Version 1.5.4 980706
 - Cursor keys in application mode would always use the 8 bit syntax
   \217 A (where A is A,B,C,D, depending on the arrow) even if running
   in 7 bit mode. Now ESC O A (where A is A,B,C,D, depending on the arrow)
   is used.

Version 1.5.5 980923
 - Possible to define response to ENQ in termtype dialog window
 - '*' key on the keypad would send ',' in in application mode
 - Support for national installation (none US catalog names)

*** List Of Files ***

The Mocha W32 Telnet package consists of the following files.

    README.TXT          Introductory information
    setup.exe           Installation program (*)
    mtelnet.hlp         Help file
    mtelnet.cnt         Index to help file
    keys.map            Function key mapping (ASCII file)
    pctonet.map         Character map file (ASCII file)
    nettopc.map         Character map file (ASCII file)
    LICENSE.TXT         license agreement/warranty disclaimer
    REGISTER.TXT        order form
    FILE_ID.DIZ         brief description for bulletin boards

    (*) setup.exe will be renamed to
         
          mtelnet.exe : Mocha W32 Telnet application
          mtuinst.exe : Uninstallation program

    If you did not receive all these files please contact 
    frydendal@mochasoft.dk, or check www.mochasoft.dk
