Installing Pro Engineer 19  -- by Flat Chicken

Okie peoples, I hope you REAAAAALY want this program, because you
have a LOT to do to install it :)

1) unpack everything using long file names and directories.
2) run setup.exe (don't try to run the programs in other dirs, they won't work)
3) Note that the CPU-ID of your machine is 00-00-FC-FC-FC-FC. All of the serial
   numbers are based on this ID, which normally comes from your Ethernet card.
   Luckily, we have patched all the programs so they always think your ID is
   the one listed above.

4) Choose Install or Update Software & Click Ok to move on.

5) Choose:
      Install software for a new installation.
      Install demo files? <-- NO (Unless you have the addon with the demos)
      Number of unique serial numbers to add: 1
      Configure this machine for LOCKED licenses.
      Will you add any floating options? NO
   Then click OK to move on.

6) Enter any Path to install Pro-E to. NOTE: It will take 200+ megs!
   DO NOT INSTALL TO A DIR WITH A SPACE IN THE NAME (Program Files, etc.)
   Click OK to move on.

7) Select the platform you wish to install (win95 or NT, This should be
   the platform you are currently running.)
   Select any optional languages to install. (If you have the addons)
   Click OK to move on.

8) Enter Path to search for Pro/HELP documents. (Leave it blank if you
   don't have them)
   Click OK to move on & ignore any warnings if you left the path blank.

9)  Select the following:

    Serial Type: Commercial
    Serial Number: 10-10-20-21
    LOCKED License

    Click OK to move on.

10) Here's the fun part :)
    First, enter the following:

    Revision Code: 2350474
    Auth Code: 3181256 (you must click the ADD button to enter this)

    Then, enter any of the option codes at the end of this document,
    depending upon which features you wish to enable. We were unable
    to determine what features (if any) the codes marked with a ? enable.
    Most likely, you will not need these.

    * You MUST add the WLO option code: 413637 (Must click ADD button)

After adding in these two options, go on to the next screen.  There you
must specify the Pro/Engineer Command, enter "Pro" with no quotes.  

11) After the program has installed, unzip the appropriate crack set (NT or 95)
    Copy all of the files from Objcrack.zip into the installed obj dir.
    (either ProE\i486_nt\obj or ProE\i486_win95\obj depending on your platform)

    The Pro-E files are Read Only by deafault. Select them all, right click,
    choose Properties, and deselect Read only. (otherwise, the cracks will not
    be successful)

    Then run Crack.bat to patch all the program files. 

    Then, copy the crack.exe from ProKeyCrack.zip into the installed Prokey dir.
    (either ProE\i486_nt\Prokey or ProE\i486_win95\Prokey depending on your platform)
    Then run Crack.exe to patch the program file.

12) Cross your fingers & run Pro.bat in the ProE\bin dir. :)
    Win95 users may need to increase the initial environment memory setting
    on the pro.bat's property sheet. (Right click on it, choose properties, then
    go to the memory tab. 1024 works for me.) Otherwise, the program may not run
    correctly. You can thank the makers of Pro-E for that d0h.

    PLEASE REMEMBER: Pro-E is a VERY temperamental program. If you have followed
    the procedure in this document, and it still does not run, there could be
    a problem with your system configuration. Some troubleshooting tips follow:
      
      1) Pro-E likes to eat memory. You will probably need 64+ megs to run it
         properly, and some memory configuration may need to be done with
         each program's proerties tabs. (mostly a problem in win95)
      2) Pro-E can be fussy about video resolution and color depth. If the
         program won't start, try increasing/decreasing these.
      3) Usually, when the program dies, it logs the error to std.out found in
         the installed, ProE\bin dir. You may wish to check this.

    NOTE ON MERGING Win95 & NT VERSIONS:
      ProE NT & 95 were released sepereately due to their sizes, if you have
      both & wish to merge them, just copy all of the folders from one to
      the other. Choose to overwrite any existing files.

Option Codes:

423380  Pro/NOTEBOOK
433211  ?
452873  ?
492197  Pro/INTF-for-CAT
1042733 Pro/ASSEMBLY
1671917 Pro/FEATURE
423383  ?
433217  Pro/MESH
452885  Pro/DETAIL
492221  PDA Version
570893  CDC Version
727982  ?
1042670 Pro/TOOLKIT
1671791 PT/Toolkit
413560  Pro/NCPOST-MILL
413571  Pro/INTERFACE
413593  ?
413637  WLO                  <-------------------Needed
413725  Pro/DETAIL_ONLY
413901  Pro/NCPOST-TURN
414253  Pro/NCPOST-ADVMFG
414957  Pro/NCPOST-WEDM
414685  Pro/INFOSOLIDIN
415821  WISDOM Version
418093  Pro/MFG-ADVANCED
422637  Pro/VIEW
431725  Pro/MFG_ONLY
449901  PDA/COMBO
486253  Pro/NCPOST-SHTMTL
268141  ORDER_DEBUG
424509  Pro/SURFACE
434340  Pro/REP
454002  Pro/PLOT
493326  Pro/CALCOMP
571974  Pro/VERSATEC
729270  Pro/HPGL2
1043862 Pro/MESH_ONLY
1673046 Pro/NOTEBOOK_ONLY
424512  Pro/LIBRARYACCESS
434346  Pro/SHEETMETAL
454014  Pro/SHEETMETAL_ONLY
493350  Matsushita
572022  Pro/LOCALE
729111  Pro/ECAD
1043799 Pro/GERBER
1672920 ?
414689  Pro/CABLING
414700  Pro/REVIEW
414722  Pro/CABLING_ONLY
414766  Pro/REPORT
414854  Pro/COMPOSITE
415030  Pro/MOLDESIGN
415382  Pro/DIAGRAM
416086  Pro/CDT
415814  Pro/NC-CHECK
416950  Pro/HARNESS-MFG
419222  Pro/DRAW
423766  Pro/DIEFACE
432854  Pro/FEM-POST
451030  Pro/PIPING
487382  Pro/DATA_for_PDGS
269270  Pro/SCAN_TOOLS
425638  Pro/View_Only
435469  Pro/ORACLE
455131  Pro/LEGACY
494455  Pro/CASTING
573103  PT/Modeler
730399  Pro/INTF_for_STEP
1044991 Pro/RIBBON_CABLNG
1674175 Pro/WELDING
425641  Pro/DESIGNER
435475  Pro/PHOTORENDER
455143  Pro/ANIMATE
494479  Pro/PERSPA-SKETCH
573151  PT/Render
730240  Pro/INTF-for-VRML
1044928 Pro/MEC-Dev-TlKit
1674049 Pro/MEC-Eqs-Devel
415818  Pro/MEC-Interface
415829  Pro/MEC-Struc-UI
415851  Pro/MEC-Struc-Eng
415895  Pro/MEC-Therm-UI
415983  Pro/MEC-Therm-Eng
416159  Pro/MEC-Vibration
416511  Pro/MEC-Motn-UI
417215  Pro/MEC-Motn-Eng
416943  Pro/MEC-Eqs-Runtm
418079  Pro/MEC-Cus-Loads
420351  Pro/MEC-Tire-Modl
424895  Pro/MFG-MILL
433983  Pro/MFG-TURN
452159  Pro/VERIFY
488511  Pro/MFG-WIRE
270399  Pro/MEC-Integratd
426767  Pro/FEAT-BodyEng
436598  Pro/PROCESS_ASM
456260  Pro/ImportTools
495584  PT/LibraryAccess
574232  Pro/CMM
731528  Pro/AE-Confirmed
1046120 PT/Mill
1675304 PT/Turn
426770  Pro/PROCESS_MFG
436604  ?
456272  Pro/WEB-PUBLISH
495608  ?
574280  Pro/WEB-LINK
731369  PT/Sheetmetal
1046057 PT/Student
1675178 PT/Mec-Struc-UI
416947  PT/Mec-Struc-ENG
416958  PT/Mec-Motn-UI
416980  PT/Mec-Motn-ENG
417024  Pro/SHEETMTL-DES
417112  Pro/NC-SHEETMETAL
417288  Pro/FLY-MEASURE
417640  Pro/FLY-MARKUP
418344  Pro/FLY-PLACEMENT
418072  Pro/FLY-MOTION
419208  Pro/FLY-EXPORT
421480  Pro/FLY-CONNECT
426024  Pro/FLY-INTERFERENCE
435112  Pro/NCPOST-LITE