          Carbon Copy/Net for Windows Version 3.0 (Netscape Edition)

                                README.TXT

   Thank you for using Carbon Copy/Net (Netscape Edition) by Microcom.  
   Carbon Copy/Net lets you remotely control another PC over the Internet.  
   With Carbon Copy/Net, you can access another PC located across the country
   or around the world as if you were sitting in front of the other PC.  
   Carbon Copy/Net is ideal for remote access, remote support, collaboration, 
   remote software demonstrations and more.  Please note that performance 
   can vary depending on Internet traffic.

   After you have installed Carbon Copy/Net, you can now use the Carbon Copy
   Netscape plug-in to access another PC from within your Netscape browser.  
   To use the plug-in, go to Microcom's home page at:

   www.microcom.com

   Microcom also markets Carbon Copy for Windows and DOS software that allows
   you to access another PC directly via a modem and phone line, a direct
   connect cable and also over the LAN.  These versions also allow users to 
   transfer files between PCs, view remote control sessions in a full screen,
   along with printing from one location to another.  For more information 
   on these and other Microcom products, please visit Microcom's home page. 

   Once you reach the plug-in section on the Micrcom home page, you will have 
   several options:

   1) Call Another PC 
   ------------------

   If you want you want to access another PC, this is the option you should 
   choose.  The other PC located across the country or around the world must 
   be connected to the Internet with a Netscape browser and also be in the 
   "Wait for Call" mode.  

   In order to call the other PC, you must enter the TCP/IP address of the 
   other PC.  You can find out the TCP/IP address of the other PC by choosing 
   Communications from the Carbon Copy Options menu on the other PC and viewing 
   the TCP/IP address. 

   Once connected, you will be able to remotely control the other PC in a Window 
   that will appear on your screen.  Simply scroll around the window to access 
   applications and documents on the other PC.

   2) Call Microcom Demo PC 
   ------------------------

   If you want to test drive remote control with Carbon Copy/Net, but you do 
   not have another PC set up to access, choose this option.  You will be able 
   to access demo PCs set up at Microcom to experience the benefits of remote 
   control.

   Once connected, you will be able to remotely control the Microcom demo PC 
   in a Window that will appear on your screen.  Simply scroll around the window 
   to access applications and documents on the demo PC.

   3) Wait for Call
   ----------------

   If you would like to make your PC available for another user to access, 
   choose this option.  Carbon Copy/Net Host will automatically enter  into 
   the "Wait for Call" mode.  The other user will now able to connect to your
   PC.

   Technical Assistance
   --------------------

   If you are having a technical problem, feel free to e-mail your question 
   to support.  Please include the words "Netscape plug-in" in your subject 
   field.  To avoid delays, please describe your problem in as much detail as 
   possible.  Include at least the following information for both computers:

   * Carbon Copy version number
   * Microsoft Windows or DOS version 
   * Netscape version
   * Type of computer
   * Type of modem and communication speed

   You can email Microcom's technical support group by visiting Microcom's home 
   page at www.microcom.com and entering the support area in the Carbon Copy
   section.


   NEW FEATURES IN CARBON COPY 3.0 FULL PRODUCT
   ============================================

   Windows 95 Support
   ------------------
   Carbon Copy for Windows 3.0 is fully compatible with Microsoft's
   Windows 95 operating system. Carbon Copy supports cross-connections 
   from Windows 95 to Windows 3.1, Windows 3.11 and Windows for Workgroups 
   and vice-versa.  

   Remote Control Enhancements
   ---------------------------
   Carbon Copy Remote Control has been significantly enhanced from 
   Carbon Copy 2.5. Remote Control is now up to five times faster
   than in previous versions, and no longer replaces drivers in the
   SYSTEM.INI file. You can also choose to view the Remote Control 
   window in Full-Screen or Windowed mode.  Remote Control now supports
   64K (Hi-Color) and 16M (True-Color) modes.

   Remote Printing
   ---------------
   The Remote Printing feature allows you to print files from any 
   application to the printer at the Host location, the printer at 
   the Guest location, or to printers at both locations. For example, 
   you could use Remote Printing if you are away from your office, 
   but want to print a document located on your office PC to the 
   printer at your current location. Simply connect to your office PC, 
   and set up Remote Printing to send the document to the printer at 
   your current location.

   Remote Drive Access
   -------------------
   Remote Drive Access allows you to share selected drives and 
   directories. Set up any drive and directory on your PC for sharing 
   with a remote computer using the Drive Sharing dialog box. After 
   setting up drives and directories for sharing, you can then use 
   the Carbon Copy drive mapping options to redirect the drive to a 
   remote PC. The redirected drive will appear as a local drive on 
   the remote PC.

   Microcom Scripting
   ------------------
   The Microcom Scripting language allows you to write programs to 
   automate Carbon Copy procedures. For example, you could create a 
   script that will automatically place a call to a remote PC and 
   transfer a file.

   File Transfer Enhancements 
   --------------------------
   Carbon Copy File Transfer has been significantly enhanced from 
   Carbon Copy 2.5. File Transfer now includes file synchronization, 
   drag and drop directory transfers, recursive directory transfers 
   and crash recovery, and is much faster than in previous versions.

   Modem Wizard
   ------------
   The Modem Wizard makes Carbon Copy installation easier by 
   automatically detecting your modem type for you and configuring 
   it correctly. You can use the Modem Wizard during installation, 
   or anytime after installation if you change your modem type, or 
   connect your modem to a different port.

   Security Enhancements
   ---------------------
   You can now set multiple levels of security in Carbon Copy. All 
   the global security options are conveniently located in the Security 
   Options dialog box. You can set individual security options on the 
   Password Table, by setting up a customized user profile for each 
   user. You can also customize the Carbon Copy Event Log to keep 
   track of any events that take place during connections.

   Uninstall Program
   -----------------
   Use the Uninstall program to remove all Carbon Copy 3.0 components 
   from your PC. The Uninstall procedure is completely automated. 
   Uninstall is useful if you want to free disk space on your PC, and 
   no longer want Carbon Copy installed on your PC.

   Load Upon Windows Startup
   -------------------------
   Use the "Load upon Windows Startup" feature to start Carbon Copy
   running on Windows 95 prior to the Network login prompt. This 
   feature is useful in conjunction with the "Reboot On Disconnect"
   feature. It allows you to remotely control a Network login on
   to Windows 95.

End of File
