INSTALL.TXT

CD-View 2.02c
Installation Guide
12/06/94


Table of Contents
-----------------

Section 1      Introduction
Section 2      Getting Started
Section 3      Installing CD-View
Section 4      Accessing CD-View
Section 5      Automating CD-View Login
Section 6      Trouble Shooting


Section 1 - Introduction
------------------------

Congratulations on obtaining your copy of ORNETIX network products
CD-View. During the installation, please notice that the setup
program provides defaults for each option. These defaults are the
recommended settings for the CD-View installation.


Section 2 - Getting Started
---------------------------

Installation of the CD-View Server includes:

1.  A workstation configured for login to your NetWare server.

2.  One or more CD-ROM drives configured with the Microsoft CD-ROM
    Extensions (MSCDEX.EXE).

3.  Serial Number and Unlock Code, located on the inside cover of
    the CD-View User's Manual.

Important:  For a quick and successfull installation, please be sure
            that the above requirements are fulfilled before trying
            to install CD-View.


Section 3 - Installing CD-View
------------------------------

1.  Select your CD-View server workstation.  

2.  Insert the CD-View diskette into drive A: or B:, switch to that
    drive by typing A: or B:, and press <Enter> at the DOS prompt.

3.  Type SETUP and press <Enter>.
   
4.  Select First Time Installation and press <Enter>.

5.  Type the Boot Drive Letter of this machine. Type the directory
    to install CD-View to and press <ESC>.

	  C:\      is the default Boot Drive letter and 
	  C:\CDVU  is the default Installation Directory

6.  Complete the "Registration Information". The Serial Number and
    Unlock Code are located on the inside cover of the CD-View
    User's Manual.

7.  Select "Parameter Information". Default Parameter Information
    is already in place. The only option you may need to provide is
    the External and Internal Network Address. The External Network
    Address defines the segment number on which the CD-View server
    resides. The Internal Network number defines the unique number
    to be used by CD-View. Ensure that this number is not used by
    any other server on the whole network. The default value is
    determined from the ethernet address on the Network Interface
    card.
    Press <Esc> to continue.

8.  Select "Volume Information". A default volume setup is already
    in place. You have the option to change the CD-ROM volume names.
    Press <Esc> to continue.

9.  Select "Cache Information". A default cache setup is already in
    place.  
    Press <Esc> to continue.

10. Select "Create New Setup". Select 'Y' to update the AUTOEXEC.BAT
    file.  

11. Load SHARE on the CD-View workstation.

12. Change to the CD-View directory, type START and press <Enter>.

13. Run SYSCON on another workstation. Choose "Change Current Server",
    press <Ins>, select CDVIEW (If you changed the server name from its 
    default, choose it instead).

      Username: SUPERVISOR 
      (no password required)

14. Add users to the CD-View server.

Note: CD-View does not support Trustee directory assignments.

The CD-View server is ready!


Section 4 - Accessing CD-View      
-----------------------------

After successful LOGIN to your NetWare Preferred Server, type the 
following commands: 

Note: If the name of the CD-View server is not CDVIEW (if you
      changed the default server name), please replace CDVIEW
      with the correct server name for the following examples.

1.  ATTACH CDVIEW/SUPERVISOR
    MAP R:=CDVIEW/CD0:
    MAP S:=CDVIEW/CD1:

2.  Type DIR R: <Enter>. The directory of volume CD0: will be displayed.

CD-View is successfully sharing CD-ROM data across the network.


Section 5 - Automating CD-View Login
------------------------------------

Use the NetWare System Login Script, User Login Script, or a batch
file to automate connection to CD-View

Note: Please refer to the syntax in Section 4 of this Installation  
      Guide for correct usage of NetWare commands. For more
      information on NetWare Login Scripts and commands, refer to
      the NetWare User's Manual.


Section 6 - Trouble Shooting
----------------------------

Unable to LOGIN or ATTACH to CD-View

  Type SLIST from a NetWare workstation. If CD-View does not appear
  on the list, make sure the NetWare drivers and SHARE have been
  loaded, then run START.BAT 

Unable to MAP drive letters correctly

  Be sure the MAP command is typed in correctly and the : follows
  the volume name.



Ornetix is dedicated to meeting and advancing the needs of the
information systems of the 90s. Our innovative technologies and
practical, easy-to-use products provide NetWare users with the
tools for "Making networks better" ... by making them simpler
to manage, easier to use, and more functional and efficient.

CD-View is a trademark of Ornetix. All other product names are
trademarks and/or registered trademarks of the respective
manufacturers.

(C) Copyright 1993-1995 Ornetix Technologies, Ltd. All rights reserved.


