DOS.TXT - Installation instructions for MS-DOS 5.x and MS-DOS 6.x
          (or compatible). See WIN31.TXT, WIN95.TXT or OS2VDM.TXT
          if installing unter another operating system.
          
Instructions:

          A:
          INSTALL

Note, this document is written from the perspective of installing
TAPEDISK Professional.  The installation of the Professional version
of TAPEDISK normaly installs into C:\TD654.  If you are installing
the TAPEDISK Demo the default directory for installation is
C:\TD654250. The TAPEDISK Demo V6.5.4 is a 250MB restricted version
of TAPEDISK.

If you have installed this into a different directory please
make adjustments to the following documentation.

You should read the TAPEDISK User's Guide for complete installation
instructions.  TAPEDISK does have an automatic configuration editor.

For most configurations the automatic process works well. Some systems
may encounter problems with the automatic installation procedure. It
is important for you to understand the requirements for proper installation
of the TAPEDISK device driver.

After the TAPEDISK software has been installed onto your hard disk
your configuration must be adjusted to include the TAPEDISK device
driver. You may use the TAPEDISK Configuration Editor to perform these
changes.

To start the TAPEDISK Configuration Editor please exit Windows 3.1x and
shut down any TSRs.  Set the current drive and directory to that of
the TAPEDISK software and enter CONFIG.  Example:

	C:
	CD \TD654
	CONFIG

Then answer the questions presented by the TAPEDISK Configuration
Editor.

---
End DOC.TXT



