    ************************************************************************

                           PC-cillin 5.0 README FILE
                           Trend Micro Devices, Inc.

    ************************************************************************


                            Welcome to PC-cillin !


        This file contains additional information about PC-cillin not
        contained in the User's Guide. Please read this document
        before you report any problems.

        We strongly recommend that you read the Quick Start card and
        familiarize yourself with the first two chapters of the
        PC-cillin User's Guide before running PC-cillin.



{}
           Please check the following before installation:
 =======================================================================

 1. Boot up normally from your hard disk to install PC-cillin

 2. If you use or plan to use Windows 95, install Windows 95 first, then
    boot up from MS-DOS to install PC-cillin

 3. If you are using any High  Capacity  device  drivers  such  as  Disk
    Manager or EZDrive please boot up from C: drive to install PC-cillin

 4. For OS/2 Boot Manager users,activate DOS partition before installing

 5. Please uninstall PC-cillin before installing/uninstalling  XtraDrive

 =======================================================================
        For more information, please refer to the readme file.
{}



                             =================
                             TABLE OF CONTENTS
                             =================



    1.0 IMPORTANT INFORMATION
        1.01 Installation Requirements
        1.02 Problem Installation
        1.03 WINDISP.EXE
        1.04 Pattern Expiration Message
        1.05 Scanning Compressed Files
        1.06 General Information

    2.0 COMPATIBLITY ISSUES
        2.01 FastLock Data Protection Program
        2.02 HyperDisk Cache Program
        2.03 McAfee SCAN
        2.04 Norton Utilities' CALIBRAT.EXE program
        2.05 Older version Local Bus with Cache buffer problem.
        2.06 PCTool's DISKFIX.EXE
        2.07 TeleMagic
        2.08 Windows 3.x
        2.09 Windows For Workgroups 32-bit File Access
        2.10 Windows 95 / NT
        2.11 High Capacity device driver
        2.12 Compressed Volumes
        2.13 Unable to run Windows
        2.14 QDPMI.SYS
        2.15 TSRSCAN Virus Detection and Prevention System
        2.16 Memory Optimization and TSRSCAN

    3.0 TECHNICAL SUPPORT
        3.01 Technical Support for USA
        3.02 Technical Support for ASIA-PACIFIC
        3.03 Technical Support for EUROPE



    1.0 IMPORTANT INFORMATION

    1.01 Installation Requirements
    ----------------------------------------
        Installation requires at least 400 KB free conventional  memory.
        If there is insufficient memory available, restart your computer
        loading only essential TSR's and device drivers.

        The total disk space requirement to install all PC-cillin files,
        including DOS and Windows programs, is approximately 4.0 MB.


    1.02 Problem Installation
    ----------------------------------------
        If you have problems installing PC-cillin, edit your  CONFIG.SYS
        and AUTOEXEC.BAT files to temporarily remove non-essential TSR's
        and device drivers.   The COMPATABLILTY ISSUES section  of  this
        file provides information on possible conflicts  with  PC-cillin
        and other programs. Note that Technical Support is only provided
        to registered users.



    1.03 WINDISP.EXE
    ----------------------------------------
        PC-cillin  version 5.0  includes  a  Windows  interface  program
        called WINDISP.EXE.   This program allows the  PC-cillin  Sensor
        program to show boot virus warning messages  under  the  Windows
        environment.   This way PC-cillin will display a warning message
        as well as generate  a  warning  sound  when  a  boot  virus  is
        detected on floppy drives. It will be loaded automatically  when
        Windows startups (for more information about WINDISP.EXE, please
        see the USER'S GUIDE).


    1.04 Pattern Expiration Message
    ---------------------------------------------
        The PC-cillin virus traps DO NOT require  the  use  of  a  virus
        pattern to protect your system from all types of viruses  ( both
        known and unknown ).   However,  we  have  provided  extra  scan
        utilities to provide you with even  greater  protection.   These
        scan utilities require the use  of  a  virus  pattern  which  is
        frequently updated to include the most recent viruses.   If  you
        receive a pattern expiration message,  please contact your local
        PC-cillin supplier for a copy of the newest virus pattern.


    1.05 Scanning Compressed Files
    ---------------------------------------------
        If you would like PCSCAN  to  also  scan  compressed  files  for
        viruses, please use the /z or -z command.   PCSCAN only supports
        PKLITE, LZEXE, PKZIP, and LHA compressed files.


    1.06 General Information
    ----------------------------------------
        Reboot your computer  after  installing  PC-cillin.   This  will
        ensure that PC-cillin is up and running, ready  to  protect  you
        from deadly viruses.

        If the PC-cillin installation program modifies any of your files
        it will backup the original file to extention PCC.   For example
        if your AUTOEXEC.BAT file is modified, the original file will be
        saved as AUTOEXEC.PCC.

        Please take a few moments to read this  document.   It  contains
        important information that is  not  included  in  the  PC-CILLIN
        USER'S GUIDE.




    2.0 COMPATIBLITY ISSUES


    2.01 FastLock Data Protection Program
    ---------------------------------------------
        In order for FastLock to protect your data, it will encrypt your
        boot area.  Therefore before running FastLock  to  protect  your
        hard disk, please follow the instructions below:

        (1) Copy all Fastlock files to a floppy diskette.

        (2) Boot your system from A: using the same DOS version.

        (3) Run FastLock from the floppy diskette to protect  your  hard
            disk (make sure the floppy diskette is not write protected).


    2.02 HyperDisk Cache Program
    ---------------------------------------------
        If your system experiences problems after installing  PC-cillin,
        place the device driver for the HyperDisk  Cache  program  AFTER
        the PC-cillin device driver in the CONFIG.SYS file  ( Otherwise,
        the HyperDisk  Cache  Program  will  incorrectly  write  to  the
        PC-cillin boot loader believing it to be the boot sector).


    2.03 McAfee SCAN
    ---------------------------------------------
        If you run SCAN C: while PC-cillin is on guard, and you  receive
        a warning that the virus " TRIPLE SHOT " is  resident  in  upper
        memory, please disregard this message.


    2.04 Norton Utilities' CALIBRAT.EXE program
    ---------------------------------------------
        The CALIBRAT.EXE program in the Norton  Utilities  Package  will
        modify the hard disk boot sector when executed.   You may select
        [C]-Continue when  PC-cillin  warns  you  that  CALIBRAT.EXE  is
        trying to modify the hard disk boot sector, or you may  use  the
        PC-cillin configuration program PCCICFG.EXE (for DOS) or  PCCWIN
        (for Windows) to adjust the PC-cillin Sensitivity  to  turn  the
        Partition/Boot Sector Write Protect Warning  to  " OFF "  before
        executing CALIBRAT.EXE.


    2.05 Older version Local Bus with Cache buffer problem
    --------------------------------------------------------
        Some older Local Bus cache buffer versions will cut a few  bytes
        from RAM for their own use.  This practice will  cause  problems
        for the Windows 32-bit disk access option as well as PC-cillin's
        Boot Security.  Newer Local Bus  versions  have  corrected  this
        problem.  If you have installed PC-cillin and one of the  add-on
        cards in your  system  has  this  problem,  at  system  boot  up
        PC-cillin will warn you the system was infected by a boot  virus
        and will automatically reboot your system. Follow these steps to
        resolve this false alarm situation:

        (1) Boot up your system from A: drive.

        (2) Go to the directory where you installed PC-cillin ( normally
            C:\PCCI5).  Execute the PCCICFG program, select Sensitivity,
            and set Boot Security to OFF.

        (3) Reboot the system from C: drive.



    2.06 PCTool's DISKFIX.EXE
    -------------------------
        The DISKFIX.EXE program will modify the hard  disk  boot  sector
        when executed.  You may select [C]-Continue when PC-cillin warns
        you that DISKFIX.EXE is trying to  modify  the  hard  disk  boot
        sector, or you may  use  PCCICFG.EXE  to  adjust  the  PC-cillin
        Sensitivity to turn  the  Partition/Boot  Sector  Write  Protect
        Warning to "OFF" before executing DISKFIX.EXE.



    2.7 TeleMagic
    ---------------------------------------------
        If you experience some  problems  when  running  TeleMagic  with
        PC-cillin installed, please turn off the  "PC-cillin Happy Face"
        by using the PCCICFG.EXE configuration program.


    2.8 Windows 3.x
    ---------------------------------------------
        In order to load PCC for Windows and modify  SYSTEM.INI, WIN.INI
        automatically, please add the Window's directory  to  your  path
        and Select Express Installation or Select "YES" for  the  Modify
        SYSTEM.INI, WIN.INI files options in Custom Install.

        If PCC for Windows can't be  loaded  automatically  when  Window
        starts up.  Please run the program TMDGROUP.EXE located  in  the
        directory where you installed  PC-cillin ( by  default  this  is
        C:\PCCI5 ).

        After installation is complete please check that  the  following
        line has been added to your SYSTEM.INI file under  the  [386Enh]
        section.

            ReflectDOSInt2A=True

        During installation, this line will automatically be  added  for
        you.  However, if the Installation Program could not locate your
        Windows directory you will have to add  this  line  yourself  by
        following the instructions below using a text editor (EDIT.COM)

        (1) If you are in Windows, exit to DOS.

        (2) Go to the directory where Windows  is  installed ( for  this
            example we will use C:\WINDOWS).

        (3) Open the WIN.INI file using a text editor.

        (4) Insert the following line into the section  headed  [386Enh]
            (Your screen should look something like this)

            [386Enh]
            ReflectDOSInt2A=True

        (5) Save your changes before you exit the text editor.


    2.9 Windows For Workgroups 32-bit File Access
    ------------------------------------------------
        Windows for Workgroups Ver 3.11 provides 32-bit File  Access  to
        increase performance on certain  systems.   This  feature  reads
        disk information directly, bypassing all DOS functions including
        PC-cillin.  When this option is enabled, PC-cillin will  NOT  be
        able to monitor virus activity in your system, thus we recommend
        that you do not enable this function.   NOTE: 32-bit File Access
        is disabled by default.  If you normally use this  feature,  and
        you want PC-cillin to inform you when it  detects  a  virus  you
        must start Windows for Workgroup with  the  /D:C  option.   This
        switch temporarily disables 32-bit File Access.


    2.10 Windows 95 / NT
    ---------------------------------------------
        The Windows 95/NT program will modify the boot area of your Hard
        Disk.  Therefore before installing Windows 95/NT you must  first
        uninstall PC-cillin.  After  installing  Windows  95/NT,  please
        Boot from MS-DOS to reinstall PC-cillin.  PC-cillin 5.0 can't be
        installed under the Windows 95/NT system.   Trend  is  currently
        developing another product for Windows 95/NT.


    2.11 High Capacity device drivers
    ---------------------------------------------
        Some high capacity disk drivers such as Disk Manager and EZDrive
        will put a small driver in the partition table.   If you boot up
        from a floppy, you won't be able  to  access  your  hard  drive.
        These types of drivers  may  conflict  with  PC-cillin's  device
        driver.    If  you  experience  this  problem  after  installing
        PC-cillin, please modify the following line in CONFIG.SYS

        DEVICE=C:\PCCI5\PCC_DEV.SYS /V


    2.12 Compressed Volumes
    ---------------------------------------------
    (1). For DOUBLESPACE,  STACKER,  SUPERSTOR   and   XTRADRIVE   users:
         Boot up from your hard drive (compressed disk) and proceed  with
         the PC-cillin installation.  If you booted up from  A: drive and
         installed  PC-cillin  onto  the  compressed  drive,    you   may
         experience problems.  In this case,  re-boot from A:  drive  and
         perform a SYS C: command to solve this problem.

    (2). We strongly suggest that you uninstall PC-cillin first before
         installing / uninstalling DOUBLESPACE, STACKER, SUPERSTOR,
         XTRADRIVE or other compression utilities.


    2.13 Unable to run Windows
    ---------------------------------------------
        If you have installed PC-cillin and your system hangs while showing
        the  Windows logo  screen,  please  modify the  following  line in
        CONFIG.SYS

        DEVICE=C:\PCCI5\PCC_DEV.SYS /V


    2.14 QDPMI.SYS
    ---------------------------------------------
        QEMM's Dos Protected Mode driver QDPMI.SYS conflicts with PCC.EXE.
        In order to use PCC.EXE please temporarily remove the QDPMI.SYS
        command from your CONFIG.SYS file.



    2.15 TSRSCAN Virus Detection and Prevention System
    ---------------------------------------------------
        PC-cillin 5.x includes a transparent file and system
        monitoring program called TSRSCAN that protects your system
        from viruses.  During installation you will be asked if you
        would like to load this program automatically from your
        AUTOEXEC.BAT. By default It is selected YES.

        By default TSRSCAN will load using the optimal memory
        configuration.  If your system has Upper Memory Blocks
        available, TSRSCAN will automatically load into Upper Memory
        thus freeing up conventional memory for you to run other
        programs.  If you do not wish to load TSRSCAN into Upper
        Memory you can specify the /NOUMB option when running TSRSCAN.

        NOTE: Exclude the TSRSCAN program from any memory optimization
        process such as MEMMAKER.  TSRSCAN is configured to
        automatically use memory efficiently.

        TSRSCAN requires the use of a virus pattern file in order to
        protect your system from known viruses.  It is essential to
        obtain the most recent copy of the virus pattern file when
        ever available.  When TSRSCAN detects that your virus pattern
        file may be out of date it will issue a message to remind you
        to obtain a newer virus pattern file.  If you recieve a
        pattern expiration message, please contact your local Mobile
        Protect supplier or a Trend office nearest you for a copy of
        the newest virus pattern (please note that this virus pattern
        update is free of charge only to registered users).


    2.16 Memory Optimization and TSRSCAN
    --------------------------------------
        Please refer to the section TSRSCAN Virus Detection and
        Prevention System.



    3.0 TECHNICAL SUPPORT

    3.01 Technical Support for USA
    ---------------------------------------------
            Trend Micro Devices, Inc. (USA)
            10415 Los Alamitos Blvd.,
            Los Alamitos, CA 90720-2111
            Tel: (1) 310-936-1188
            Fax: (1) 310-936-1196

    3.02 Technical Support for ASIA-PACIFIC
    ---------------------------------------------
            Trend Micro Devices, Inc. (TAIWAN)
            5F, No. 218, Chin Shan S. Rd. Sec. 2
            Taipei, Taiwan R.O.C.
            Tel:    (886) 2-395-5561 ext. 11, 12, 13, 14
            Fax:    (886) 2-341-2137
            BBS:    (886) 2-923-2327
                    (886) 2-923-3233

    3.03 Technical Support for EUROPE
    ---------------------------------------------
        Contact Trend directly for sales & distributor information.  For
        technical support  & downloading virus patterns from a BBS,  see
        the distributors listed below.

            Trend Micro Devices Inc. (Europe)
            Piazza San Vittore 41
            24040 Bottanuco (BG)
            ITALY
            Fax:        (39) 35-906-599
            Tel:        (39) 35-906-557

        For downloading the virus patterns  from  a  BBS  and  technical
        support, please  contact  the  authorized  Trend  Micro  Devices
        distributor in your country or in the country nearest to you.

            A.C.S.I.
            Via Appia Pignatelli. 387       (For English, Italian or
            00178 Roma, ITALY                French speaking users,
            Tel:    (39) 6-718-7385          please contact A.C.S.I.)
            Fax:    (39) 6-718-4038
            BBS:    (39) 6-718-7386

            G.S.P.
            Hard & Software
            Schmiedstr. 7
            85238 Petershausen
            GERMANY
            Tel:    (49) 8137-1318
            Fax:    (49) 8137-3865
            BBS:    (49) 8416-9692          (Cyborg Mailbox Ingolstadt)

            INTROCOM
            Steenbakkersweg 25
            7553 EH Hengelo
            THE NETHERLANDS
            Tel:    (31) 74-430-105
            Fax:    (31) 74-429-895
            BBS:    (31) 74-501-085

            ITALMIX S.L.
            Sardenya, 286
            08013 Barcelona
            SPAIN
            Tel:    (34) 3-265-5759
            Fax:    (34) 3-231-1956
            BBS:    (34) 3-231-7718

            PC KOMPaS
            V Horkach 13
            Praha 4 - Nusle
            140 00, CZECH REPUBLIC
            Tel:    (42) 2-423-874
            Fax:    (42) 2-423-879

Trend Micro Devices Inc. 1995
