 
 Gamepad Pro! Install Procedure
 (This is an extract from Gamepad Pro!'s ONLINE HELP FILE)

 1) Place all the Gamepad Pro! files in a directory of
    your choice.

 2) Add the following line to your AUTOEXEC.BAT file.

    SET GPRO=DRIVE\DIRECTORY

    where DRIVE\DIRECTORY is the disk drive and path
    in which Gampad Pro! resides. USE ONLY UPPER CASE!

    eg. SET GPRO=C:\GPRO if you placed the Gamepad
    Pro! files in the C: drive and \GPRO directory.

 3) Now RE-BOOT your PC so that the line in Step 2) 
    will be included in your PC's environment.

 4) Change to the directory where your Gamepad Pro! 
    files are stored and type "GPRO". This will execute
    the MENU program, assuming your environment 
    statement was correct.

 5) You will now need to inform Gamepad Pro! about
    your PC's hardware config. Make sure your gamepad
    is PLUGGED INTO your PC now.

    Use your mouse to CLICK on the OPTIONS icon at the
    top of the screen, then select Hardware CFG from 
    the pulldown menu.

    Now CLICK on the AUTO button to AUTO-CONFIGURE
    Gamepad Pro!'s hardware settings.

 6) Next, the message PRESS ANY BUTTON on your gamepad. 
    
    The AUTO-CONFIG routine will decide the following:

    a) The TYPE of gamepad connected.
    b) The parallel port it is connected to.
    c) The correct keyboard controller address.

 7) That's it.! You are now ready to start using your
    gamepad with yor games. Backout to the Main Menu
    now and start configuring your game setups.

    As long as you have DOS in the C:\DOS directory
    you could execute the DOS EDITOR immediately.

    Pressing gamepad buttons in the DOS EDITOR will
    produce letters corresponding to the gamepad
    buttons. This is a quick test to determine whether
    or not Gamepad Pro! has been setup correctly.


