00002: File not found.
00003: Path not found.
00004: Too many open files.
00005: File access denied.
00006: Invalid file handle.
00008: Insufficient memory to complete this process.
00015: Invalid drive.
00018: No more files.

00100: Attempt to read beyond end of file.
00101: Disk is full. Call Airborne's Customer Automation Support at
1-800-I-AM-HELP.
00102: File not Assigned.
00103: File not open.
00104: File not open for input.
00105: File not open for output.
00106: Invalid format for packed window.

00150: Disk is write-protected.
00151: Unknown disk unit.
00152: Device is not ready.
00153: Unknown command.
00154: Disk is unreadable - CRC data error.
00155: Bad request structure length.
00156: Seek error.
00157: Unknown media type.
00158: Disk sector not found.
00159: Printer is out of paper.
00160: Device write error.
00161: Device read error.
00162: General hardware failure.
00200: Division By Zero.
00201: Range Check Error.
00202: Stack Overflow - cannot allocate space for local variables.
00203: Head Overflow - not enough free space for New or GetMem.
00204: Invalid pointer operation  - Dispose or FreeMem - bad pointer.
00205: Floating Point overflow.
00206: Floating Point underflow.
00207: Invalid floating point operation (Trunc,Round, Sqrt, Ln).
00208: Overlay Manager not installed.  Most likely, not calling OvrInit or the
call to OvrInit failed.
00301: Not Enough Space on floppy disk. Insert another disk.
00302: You've tried to copy a file onto itself; please specify a different
file name.
00305: General Failure, call Airborne's Customer Automation Support
at 1-800-I-AM-HELP.
00306: Incorrect file name, please re-enter.

00400: Successful Sort.
00403: Not enough memory available for sorting.\c  Minimum memory required is
three times the size of the data item to be sorted.\c
00408: \c Item length must greater than or equal to 2, but no greater
than 32767.\c
00409: More then 32,767 data items input for sort.\c Use the "Lsort unit"
instead of the "sort unit."\c
00410: Write error during sort.\c Either the disk is full, or
a disk sector(s) is marked as "bad." \c
00411: Read error during sort.\c Probably a "bad" area on the disk.\c
00412: Could not create the Sort work file.\c Disk or directory is full,
or disk is locked.\c
00413: Sort Utility Error.\c

00500: The number of zone scales do not match the customer count.
00501: The data in the zone files is unusable.
00502: There are too many zone scales.
00503: Libra has detected an error in the zone scale file.

00504: The Customer Data File contains unusable data, and must be
replaced.
00505: The Rate Update File contains unusable data, and must be
replaced.
00506: The Customer Data File must be replaced because the version
number is out-of-date.

01000: File is empty.

01101: Unknown object id read from stream.
01102: Load constructor failed within Get or GetPtr.
01103: Attempt to read/write unusable data.

01200: Please complete the "name" field.
01201: Error packing library.
01202: Unusable signature in directory.

02000: Queue is full.  New element rejected.
02001: Queue is empty.  No element returned.

02020: Directory full--can't add entry.

02050: Cannot add command due to partial match.
02051: Cannot add command due to full key table.

02100: Insufficient EMS memory to allocate.
02101: Error allocating EMS page.
02102: EMS operation failed because no EMS available.
02103: Error mapping EMS page.
02104: Cannot deallocate EMS handle.

02200: Too many files to fit into directory buffer.

2900:   Can't open port, no slots available
2901:   UART receiver overrun
2902:   UART receiver parity error
2903:   UART receiver framing error
2910:   Int14 transmit failed
2911:   Int14 receive failed
2920:   Block shorter than requested
2921:   No room for new char in buffer
2922:   No characters to get
2923:   Timed-out waiting for a response from the host or modem
2924:   String shorter than requested
2925:   String longer than 255
2926:   User aborted during "wait"
2930:   Table full, couldn't add entry.
2931:   Modem - no command registered
2940:   Failed to open/write to event file
2941:   Failed to open/write to trace file

07000: Field is required.
07001: Bad format (number/date/time, etc).
07002: Value entered is out of range.
07003: Field contains blanks.
07004: Field contains a partial entry.
07005: Field contains an illegal character.

07100: Search string not found.
07101: Cannot write output to screen.
07102: Invalid number entered.

07110: Edit buffer is full.
07111: Line too long, CRLF inserted.
07112: Max line limit would be exceeded.
07113: Max line limit already exceeded.
07114: File truncated.
07115: File too large to fit in buffer.
07116: Block not marked or hidden.

07200: Divide overflow.
07201: Error returned by 80x87 coprocessor.

07300: Please make a selection.

07400: Name already in use.
07401: Library entry not found.

08000: String is already in string set.

08010: User object not registered with stream.
08011: Attempt to register duplicate object id.
08012: User pointer not registered with stream.
08050: Element size is zero.
08051: Incorrect dimensions for disk file.
08052: Specified row is out of range.
08053: Specified column is out of range.
08054: Specified file is not a OpLarray file.
08055: Element size is too big.
08056: Please specify a valid dimension.
08057: Less than one page in RAM.
08058: Error flushing large array file.

08100: Unusable coordinates specified for a window.
08101: Window must be active for this operation.
08102: Window must be current for this operation.
08103: Window must be inactive for this operation.
08104: Stacked window not accessible.
08105: Zoomed window cannot be zoomed again.
08106: Invalid header or hot spot index.
08107: Window must be sizeable for this operation.
08108: No command processor is available.
08109: Operation is not valid on a child window.

08200: Attempt to pick from empty list.
08201: Invalid pick orientation.
08202: Invalid pick command handler.

08220: Invalid help file format.
08221: Help unavailable, please consult the Libra II
Users' Guide.
08222: Pointer for bound-in help not registered.

08300: Too many fields in a selector/entry screen.
08301: Coordinates unusable for a field.
08302: Virtual screen not allocated.
08303: Selector/entry screen has no fields.
08305: Attempt to position cursor on non-existent field.
08306: Can't add window field to ScrollingEntryScreen.
08307: Child window already has parent or is active.

08400: Specified Printer type is invalid.
08401: Printer position out of range.
08402: No printer position routine specified.
08403: Stack overflow in font stack.
08404: Stack underflow in font stack.
08405: Stack overflow in a byte stack.
08406: No BasePrinterPtr specified for Printer.

08420: Page to be printed has no active fields.
08421: Attempt to add field when no block defined.
08422: FieldID represents non-existent field.
08423: Diagonal lines not allowed.

08500: Nil pointer where there shouldn't be one.
08501: Bad parameter to a procedure.

8900:   Out-of-range port number
8901:   General out-of-range error
8902:   Port not open
8903:   Baud rate incompatible with this device
8904:   General programming error
8905:   No device layer installed
8906:   Couldn't find a uart at this address
8907:   Parity option incompatible with this device
8909:   No end marker found in file list
8910:   Not allowed on unbuffered ports
8911:   Function not supported by device-layer

09900: General Error.  Please use a valid path name.
09901: General Error.  Too many open files.
09902: General Error.  Current directory is full.
09903: General Error.  File not found.
09904: General Error.  Invalid file descriptor.
09905: General Error.  A read request exceeded 65535 bytes.
09906: General Error.  A write request exceeded 65535 bytes.
09907: General Error.  DOS error while reading file size.

9940: Unexpected character in modem result string.
9941: CONNECT
9942: RING
9943: NO CARRIER
9944: NO DIAL TONE
9945: LINE BUSY
9947: NO ANSWER
9948: RINGING
9949: VOICE ANSWERED
9950: MODEM ERROR

10000: <GetPageStack> The size of the Pagestack is smaller than <MaxHeight>.
10001: <AddRec> (only in Save-Mode) The operation was not completed due to
serious IO error. However, the fileblock doesn't need to be rebuilt, since
the repair was successfully completed.
10002: <DeleteRec> (only in Save-Mode) The operation was not completed due to
serious IO error.  However, the fileblock doesn't need to be rebuilt, since
the repair was successfully completed.
10003: <AddKey> (only in Save-Mode) The operation was not completed due to
serious IO error.  However, the fileblock doesn't need to be rebuilt, since
the repair was successfully completed.
10004: <DeleteKey> (only in Save-Mode) The operation was not completed due to
serious IO error.  However, the fileblock doesn't need to be rebuilt, since
the repair was successfully completed.

10010: <OpenFileBlock> The Index-File wasn't correctly closed after the last
use.  This could have unforeseen consequences for future use of the associated
Isam-Files.  A reconstruction cannot be avoided.
10011: After <OpenFileBlock>, <OpenSaveFileBlock>, and network equivalents
Specified Fileblock is already open.

10020: <MakeFileBlock> The passed Data Structure length was smaller than 21 or
larger than 2,147,483,647.

10030: <OpenFileBlock> Not enough memory to add a Fileblock-Descriptor-Field.

10040: <MakeFileBlock> Not enough memory to create a Fileblock-Descriptor-Field.

10050: <MakeFileBlock> More than <MaxNrOfKeys> or less than 0 keys were given.

10055: <MakeFileBlock> An attempt was made to make a key larger than
<MaxKeyLen>.

10060: <OpenFileBlock> The number of keys read is greater than 750, or
an error unrecognized by the operating system occurred.
10070: General Failure.  The requested number of bytes were not read by a read
request.

10075: General Failure.  The requested number of bytes were not written by a
write request.  Disk full?

10080: <CloseFileBlock> The fileblock wasn't open.

10090: <MakeFileBlock> Not enough memory to add a Fileblock.

10100: <OpenFileBlock> Not enough memory to create a Fileblock.

10120: <OpenFileBlock> The fileblock couldn't be opened, because the constants
KeyLen or PageSize don't fit this FileBlock.

10140:  General Error.
 Unexpected DOS error detected in low level I/O routine. Typically, this
error is due to a locking problem. If you get it, you'll probably need to
use a debugger to trace into the FILER unit's lowest level routine, where it
makes a DOS call, to see which DOS call is being made and exactly which DOS
error code is being returned.

10150:   General Error
 Invalid open mode. This error typically occurs when attempting to use
<OpenNetFileBlock>, and the files are on a drive that doesn't support
sharing modes. For example, trying to use <OpenNetFileBlock> while running
on a system with DOS 2.x will generate this error.

10160: <CloseFileBlock> Fileblock not correctly closed.

10168:  After <UsedKeys> Invalid key number specified.
10169: <SearchKeyAndRef> Invalid parameter - KeyNumber.
10170: <FindKeyAndRef> Invalid parameter - KeyNumber.
10171: <ClearKey> Invalid Parameter - KeyNumber.
10172: <NextKey> Invalid Parameter - KeyNumber.
10173: <PrevKey> Invalid Parameter - KeyNumber.
10174: <FindKey> Invalid Parameter - KeyNumber.
10175: <SearchKey> Invalid Parameter - KeyNumber.
10176: <KeyExists> Invalid Parameter - KeyNumber.
10177: <NextDiffKey> Invalid Parameter - KeyNumber.
10178: <AddKey> Invalid Parameter - KeyNumber.
10179: After <DeleteAllKeys> Key number is out of range.
10180: <OpenFileBlock>, <OpenSaveFileBlock> and in Save-Mode <AddRec>,
<DeleteRec>, <AddKey>, <DeleteKey> Attempt to repair the FileBlocks failed, a
reconstruction is unavoidable.

10190: <IsamExtendHandles> Extend handle function supported only under DOS 3.3
and later
10191: <IsamExtendHandles> Error obtaining memory for more handles
10192: <IsamExtendHandles> Error when DOS attempted to set up more handles
10193: After <AddRec>, <AddNetRec>, <PutRec>, or <PutNetRec>
Attempt to write to record 0.
10194: <UndeleteRec> <UndeleteNetRec> Attempt to undelete a record not deleted.

10200: <FindKey> The requested key was not found.

10205: <GetNetRecReadOnly> A record that was in Lock state was read.

10210: <SearchKey> No matching Key was found and no greater key found.

10220: <DeleteKey> The key to delete was not found.

10230: <AddKey> The key passed as parameter was declared as a primary key, but
it already exists, or was declared as secondary key and exists with the same
data reference.

10240: <NextDiffKey> There is no key larger than the one passed.

10245: <PrevDiffKey> There is no key smaller than the one passed.

10250: <NextKey> There is no next Key.

10255: <NextKey> Sequential access not allowed.

10260: <PrevKey> There is no previous key.

10265: <PrevKey> Sequential access not allowed.

10270: <FindKeyAndRef> A key with this reference was not found.

10301: <WSNrLogIn>, <WsNrLogOut> Unable to lock workstation log file after
<LogRetries> retries.
10302: <WSNrLogIn>, <WsNrLogOut> Unable to unlock log file.
10303: <WSNrLogIn> Out of workstation numbers.

10310: <InitNetIsam> No Net found.

10315: <ExitNetIsam> Net exited improperly.

10320: <MakeNetFileBlock> Attempt to create a Net-FileBlock failed.
10321: <CloseNetFileBlock> Closing a Net-FileBlock is impossible, when it's
found locked.

10330: <LockFileBlock> <LockAllOpenIsamFileBlocks> Lock-attempt failed.

10335: <LockRec> Lock-attempt failed.

10340: <UnLockFileBlock>, <UnLockAllOpenIsamFileBlocks> Unlock-attempt failed.

10345: <UnLockRec> Unlock-attempt failed.

10350: General Failure.  The dialog file was incorrectly read.

10355: <OpenNetFileBlock>, <OpenSaveNetFileBlock> A lock prohibits the
operation.
10356: <OpenNetFileBlock>, <OpenSaveNetFileBlock> Not enough memory to create
a Net-FileBlock.
10357: <OpenNetFileBlock>, <OpenSaveNetFileBlock> The opening of a dialog-file
failed.

10359: <ClearNetKey> A lock prohibits the operation.
10360: General Failure.  A lock prohibits the operation, internal error.
10361: <GetRecInSpiteOfLock> A lock prohibits the operation.
10362: <PutRecInSpiteOfLock> A lock prohibits the operation.
10363: <GetNetRec> A lock prohibits the operation.
10364: <FindNetKey> A lock prohibits the operation.
10365: <SearchNetKey> A lock prohibits the operation.
10366: <NextDiffNetKey> A lock prohibits the operation.
10367: <NetKeyExists> A lock prohibits the operation.
10368: <PutNetRec> A lock prohibits the operation.
10369: <AddNetRec> A lock prohibits the operation.
10370: <DeleteNetRec> A lock prohibits the operation.
10371: <AddNetKey> A lock prohibits the operation.
10372: After <DeleteAllNetKeys>  A physical lock prohibits this operation.
10373: <NextNetKey> A lock prohibits the operation.
10374: <PrevNetKey> A lock prohibits the operation.
10375: <PutNetRec> This operation only allowed when the Net-FileBlock is in
the lock state.
10376: <AddNetRec> This operation only allowed when the Net-FileBlock is in
the lock state.
10377: <DeleteNetRec> This operation only allowed when the Net-FileBlock is in
the lock state.
10378: <AddNetKey> This operation only allowed when the Net-FileBlock is in
the lock state.
10379: After <DeleteAllNetKeys>  Fileblock must be locked.
10380: <UsedNetRecs> A lock prohibits the operation.
10381: <FreeNetRecs> A lock prohibits the operation.
10382: <FindNetKeyAndRef> A lock prohibits the operation.
10383: <SearchNetKeyAndRef> A lock prohibits the operation.
10384: <GetNetRecReadOnly> A lock prohibits the operation.
10385: After <UsedNetKeys>  A lock prohibits the operation.
10386: After <UsedNetKeys>  A physical lock prohibits this operation.
10387: After <GetNetRecReadOnly>  A physical lock prohibits this operation.

10390: <EnableSearchForSequential> Invalid Parameter - Key Number.

10393: <DisableSearchForSequential> Invalid Parameter - Key Number.

10396: <TestSearchForSequential> Invalid Parameter - Key Number.
10397: After <PreAllocateFileBlock> or <PreAllocateVRecFileBlock>
 This operation allowed only when the net-Fileblock is locked.
10398: After <LockFileBlock>,<LockRec>,<ReadLockFileBlock>,and others
 Insufficient heap space to allocate lock list entry.

10410: After <ReorgFileBlock> or <ReorgVFileBlock>  Data file not found.

10411: After <ReorgFileBlock> or <ReorgVFileBlock>
 Insufficient heap space for work buffers.

10412: After <ReorgFileBlock> or <ReorgVFileBlock>
<DatSLen> or <DatSLenOld> exceeds 64K.

10900: Turbo Toolbox access error.

12000: Invalid shipment number.
12001: Please complete the "Company Name" field.
12002: Address-1 cannot be blank.
12003: Please enter a destination "City" for this shipment.
12004: Please enter a destination "Country" for this shipment.
12005: Libra cannot process a shipment to this country, please
contact Airborne Customer Service.
12006: Pieces cannot be zero.
12007: Weight cannot be zero.
12008: Shipment exceeds allowable weight for Letter.
12009: Value for Customs cannot exceed $25,000.00.
12010: Value for Carriage cannot exceed Value for Customs.
12011: A Commercial Invoice is required for shipments which have a Value for
Customs.
12012: Value for Customs and Commercial Invoice Total must be equal.
12013: Please complete the Commercial Invoice line items.
12014: Please complete a Commercial Invoice for this shipment.
12015: Shipments with a Value for Customs greater than $2,500.00 require an
Export Declaration.
12016: Total of Customs Value (CstmsVal) on Export Declaration must equal
Value for Customs on main screen.
12017: Total Weight on Export Declaration must equal Weight on main screen.
12018: Please complete the Export Declaration line items.
12019: Please complete the Export Declaration for this shipment.
12020: License #, EIN/SSN #, and Ultimate Dest on Export Declaration cannot be
blank.
12021: Individual pieces cannot exceed 99 lbs.
12022: Letters cannot be dutiable (have a Customs Value).
12023: Error rating shipment.  Please call Airborne's Customer Automation
Support, at 1-800-IAM-HELP.
12024: The scale is not responding.  Please enter the weight manually.
12025: Declared Value cannot exceed $24,999.99.
12026: Please complete the "Sent By" field.
12027: Please complete the "Shipper's Reference" field.
12028: Shipments to this destination require a full description.
12029: The Name, Street, City, State, Zip and Weight fields must be completed.

12030: The next Shipment Number in the sequence is invalid.
12031: The Shipment Number you entered will cause the next Shipment Number
in the sequence to be invalid. Please check the test shipment for the correct
Shipment Number and re-enter.

12040: Unit Price cannot exceed $25,000.000.
12041: Total Price cannot exceed $25,000.00.
12042: Quantity times Unit Price (Qty x Unit Price) cannot exceed $25,000.00.
12043: Invoice Total (Value for Customs) cannot exceed $25,000.00.

12050: The total of Value for Customs (Cstms Val) cannot exceed $25,000.00.
12051: Total Weight cannot exceed 999 pounds.

12052: Warning - You need to fill out a Canadian Customs Invoice for
shipments with values in excess of $900.00 Canadian.
12053: A letter cannot have more than 1 piece.
12054: Please enter a Canadian Postal Code.
12055: Please enter the Canadian Postal Code in A9A9A9 format.

12060: Opening Receiver File
12064: Reading Receiver
12065: Writing Receiver
12066: Closing Receiver File

12070: Unable to open Shipment File
12071: Positioning within Shipment File
12074: Unable to read Shipment File
12075: Unable to write Shipment File
12076: Closing Shipment File
12077: The shipment file has been closed by DayEnd.  This
error was caused by copying a closed shipment file to
AIRBILL.000.  Rename or Delete AIRBILL.000.

12084: Reading Country/Routing File
12086: Country File is not in Ascending order.

12099: Loading Rate file

12109: Loading Setup file

12200: This Shipment Number has already been used.  Please advance the Labels
to a number that has not been used, and enter that number on the Label Setup
window.

12210: A partial Day End was run. You must re-run Day End before you resume
processing shipments.

12250: Initializing scale.  Please enter Weight manually.
12260: Initializing printer
12270: Registering printer

12300: Initializing ISAM
12310: Initializing Page Stack
12320: Initializing Variable record buffer

12400: Printing Label
12410: Printing Manifest
12420: Printing Invoice / Remittance Advice

12500: Initializing Shipment Entry screen
12501: Initializing Shipment Number Entry screen
12502: Initializing Commercial Invoice Entry screen
12503: Initializing Export Declaration Entry screen
12504: Initializing Label

12510: Initializing Day End Summary Screen

12520: Invalid Rate scale.  Route and/or Rate file out of date.

12530: Initializing Browse/Void Screen

12540: Initializing Shipment browser

12550: Initializing Pick List Field

12560: Index file defective. Rebuild the file?
12570: Data file does not exist. Create new file?
12580: Unable to rebuild data files.
12590: There are no shipments to void.
12591: Voiding...
12592: Unvoiding...
12593: Printing...
12594: Changing Dates...
12595: Scanning and Selecting...
12596: Scanning...
12600: No shipment files found.
12610: Error Opening Shipment file.
12620: Error Getting Header Record.
12630: Error Closing Shipment file.
12640: Error in Day End Step 1.
12650: Error in Day End Step 2 Copy.
12660: Applying per shipment Rating.
12670: Error in Day End Step 2 Rerate.
12680: Error in Day End Step 2 Rename.
12690: Archiving files.
12700: Error in Day End Step 3 Archive.
12710: Error in Day End Step 3 Rename.
12720: Error in Day End Step 4 Rename.
12730: unused
12740: Printing Invoice / Remittance Advice.
12750: Day End Complete.
12760: Continue?
12765: Try again?
12766: Please try again or call Airborne's Customer Automation Support
at 1-800-I-AM-HELP.
12770: Files Selected for backup.
12780: Insert a diskette - press any key when ready.
12790: Print Screen.
12795: Call Airborne's Customer Automation Support, at 1-800-I-AM-HELP.
12800: Processing Incomplete.

12810: Unused
12820: Continue with label print?
12830: Data Check Successful.
12840: Data may be corrupt.
12850: Disk error, canceling process.
12860: ERRORS in shipment data exist. Shipment Processing NOT possible.
12870: Error Reading Country/Routing file
12880: Failed to Initialize Browser.
12890: Failed to load file.
12900: Insufficient Disk Space to Load Program
12910: Loading Mail List Reports...
12920: Mail List file could not be opened, returning to Shipment Menu.
12930: Not Enough Memory for swap.
12940: Performing Data Checks...
12950: Receiver file could not be opened, returning to Shipment Menu.
12960: There are no Receivers assigned to this group, Label Print canceled.
12961: Duplicate Shipment Number. Advance the labels to a number that has
not been used. Then restart shipment processing.

12970: There are no records. Add one?
12980: There are no Receivers to display.  You can add Receivers
from the shipping screen, or by selecting RecvData from the Main Menu
and Maintenance from the Receiver File Menu.
12990: Receiver not found in this Group.
12995: This is a new Receiver Key.  Enter all information.
13000: No room to perform an insert in Group List.
13010: This Receiver does not exist. Add to Database?
13020: Initializing Receiver Entry Screen.

13030: The Group already exists. Try again?
13040: Record has been changed. Ignore changes?
13050: Files not changed.
13060: Group has been changed. Ignore changes?
13070: The Group ID already exists. Try again?
13080: Delete the Group?

13090: Report Canceled!
13100: There are no groups on which to report.
13110: Disk error, aborting.
13120: Error requesting printer form.
13130: Error initializing printer.
13140: Error registering printer.
13150: Printer Not Ready.
13160: Mail List file could not be opened, returning to Shipment Menu.
13170: Receiver file could not be opened, returning to Shipment Menu.
13180: Error initializing menu.
13190: Data may be corrupt.
13200: Returning to Mail List...

13220: Exit to DOS?

13260: Label in printer cannot be used with shipments that are billed to
a receiver or a 3rd party. If you want to use this field, change to
the 880 or 882 label with the Change Modes option.
13270: Label in printer cannot be used with dimensional weight shipments.
If you want to use this field, change to the 880 or 882 label with the
Change Modes option.
13271: Label in printer can only be used with single piece shipments. If
you want to use this field, change to the 880 or 882 label with the
Change Modes option.

13280: Zip code is invalid.
13290: You cannot enter an Insurance amount without selecting Insurance or
Declared value.
13300: Please enter a street address.
13310: Please enter an account number.
13320: Weight does not qualify for Select Delivery Service (SDS).
13330: Dimensions can not be specified for Letter Express shipments.
13340: Only one piece allowed for dimensional weight shipments.
13350: You are in Enter Shipment Number mode. The shipment number is required.
13360: Multipiece shipments cannot be processed in "Enter Shipment Number mode."
13370: Insufficient memory to use Short Cuts.
13500: Error creating print option window.

13600: The open shipment file cannot be deleted.  This file was skipped.

14000: Do you want to save your changes?

15000: Your hard disk is completely full.

17000: No Files Selected.
17003: No Reports Selected.
17005: Occurred in LISAB20.
17010: Occurred in LISAB21.
17015: Deleting Files.
17020: Press Escape to Cancel.
17025: File Deletion Canceled.
17030: Delete Selected File(s)?
17035: Error Initializing Shipment Browse Screen
17040: Occurred in LISAB22.
17045: Occurred in LISPR10.
17050: Printing Detailed Shipment Report.
17055: Printing Report By Receiver.
17060: Printing Report By Reference #.
17065: Printing Report By Country Name.
17070: Printing Report By Date.
17075: Printing Manifest.
17080: Printing Invoice/Remittance Advice.
17085: Printing Complete!
17090: Error initializing shipment report pick list.
17095: In Module LISPR11.

17101: Correct and re-enter.
17105: Delete ?
17107: Please enter a Receiver Key.
17110: In Module LISRC10.
17120: In Module LISRC20.
17132: OK to proceed with Backup ?
17135: Backing up Files.
17140: All existing data on this diskette will be deleted.  Continue ?
17142: Please insert a System/Backup diskette.
17144: Backup Canceled.
17146: Backup Successful.

17150: Unexpected result.

17160: Restore Canceled.
17162: This function restores your Receivers and Mail Lists from backup
diskettes. Receivers or Mail Lists added since the last backup will
be lost. Do you want to Continue ?
17164: Wrong diskette.  Please replace and press any key ...
17166: This disk is out of sequence.
17168: Restore Failed.  Please Restart or call Airborne's Customer
Automation Support at 1-800-I-AM-HELP.
17170: Restore more Files ?
17172: This diskette is not recognized by the restore/update program.
17175: Error trying to run a batch command with ExecDos.
17178: O.K. to run Diskette Update Procedure ?
17180: O.K. to restore Setup Files ?

17200: Save Changes?
17201: Files Not Changed.
17202: Group
17203: Not Found.
17204: Not Enough Memory for Swap.
17205: Insufficient Disk Space to Swap Program.
17206: Mail List Data May Be Unusable.
17207: Receiver Data May Be Unusable.
17208: Copy Successful.
17209: Report Canceled.
17210: There are no Groups on which to report.
17211: Error Initializing Menu.
17212: Error Locating Current Shipment Group. Processing Canceled.
17213: The Group already exists. Try again?
17214: Process the Group into shipments now?
17215: Delete the Group?
17216: Please enter a Group ID.




17305: In Module LISPR12.
17310: Error Getting Next Shipment Key.
17315: In Module LISPR13.
17320: Error Getting Next Shipment Key.
17325: Error Getting Shipment Record.
17330: Error Getting Header Record.
17335: Error Closing Shipment File.
17340: In Module LISPR14.
17345: Sort Failure.
17350: In Module LISPR15.
17355: In Module LISPR16.
17360: In Module LISPR17.
17365: Call FOCUS for an inquiry?
17370: Inquiry request canceled.

17400: Create Setup File?

17500: There is not enough memory to start this program.
17501: There is not enough disk space to start this program.  Please free
some disk space by FIRST backing up and THEN deleting some shipment files.
17502: There are not enough file handles to start this program.
17503: Warning - available disk space is low.
17504: Failure testing disk size.

17599: Libra encountered an error accessing the Invoice Control file.
17600: Libra could not initialize the shipment files.
17601: Libra could not create new shipment files.
17602: The Invoice Control file contains an invalid number.
17603: Libra encountered an error while accessing the Multi-Invoice Control
file.
17604: There are not enough invoices remaining to process your daily shipments.
17605: There are not enough invoices remaining to process your estimated
weekly shipments.
17606: Building Shipment Control file...\c
17607: The Receiver file could not be accessed and will not be available.
17608: The Zip Code data base could not be accessed.
17609: Libra encountered a problem when trying to create the shipment
entry screen.
17610: Libra could not initialize the Scan Shipment Number screen.
17611: Libra encountered an error while processing the Scan Shipment
Number screen.
17612: Confirm/ Edit is not available.
17613: Libra encountered an error while processing the Add Shipments screen.
17614: The Open Shipment file is not the correct version.  Shipments
cannot be added to this file.
17615: Libra is not available on this drive, please check the system directory.
17616: There are not enough DOS file handles available to run Libra.
17617: The receiver file may be damaged.  To rebuild the receiver file, select
Compress from the Receiver File Menu, then try again.
17618: The system's hard disk is almost full.  Do you wish to continue
processing?
17619: Libra encountered an error while trying to update your rates.
17620: Scanning for the next shipment number...\c
17621: Libra is unable to determine the next shipment number.  Please enter
the number from the last label printed; or, press F6 to print a test label
and enter that label's pre-printed number.
17622: Libra cannot display a prompt for the next shipment number.
17623: Shipment Scan entry is unavailable.  Libra encountered a problem
while trying to start.
17624: Libra encountered an error while processing the Scan Shipment
Information screen.
17625: Libra cannot display the Scan Shipment Information screen.
17626: Libra encountered an error while trying to create the Scan Shipment
Information screen.
17627: System updates are taking effect today.  Libra will now copy them
to your SYSTEM BACKUP diskette.
17628: Libra could not create the Enter Format Name screen.
17629: You have tried to use a Libra reserved file name.  Please enter
another.
17630: The file name you entered is not a valid DOS file name.  Please
enter another.
17631: Libra cannot find the path name you entered.
17632: Invalid file name.
17633: Invalid file name extension.
17634: Invalid drive name for this machine.
17635: Libra encountered an error when processing the Enter File
Name screen.
17636: Please enter a file name.
17637: The file name you entered is reserved for DOS. Please enter another.
17638: Libra encountered an error while processing the Options box.
17639: Libra encountered an error while processing the Change Working
Mode screen.
17640: Libra was unable to open the Shipment Report file.
17641: Libra was unable to create the Shipment Report screen.
17642: Do you want to create a new format?
17643: Libra encountered an error while processing the Shipment
Reports screen.
17644: Libra encountered an error while reading the Shipment
Reports file.
17645: Libra could not create the Enter File Name screen.
17646: File saved.
17647: No fields to save.
17648: All fields have been selected.
17655: Libra was unable to load the list of usable fields.
17656: Libra could not create the field selection list.
17657: Libra was unable to create the Define Format screen.
17658: Libra encountered an error when trying to display the Options box.
17659: Libra was unable to access the format definition array.
17660: Place the cursor where you would like to insert a new field.
17661: Place the cursor on the field you would like to delete.
17662: Array is empty.
17663: Libra encountered an error while processing the Format Definition
Entry screen.
17664: Libra cannot display all of the formats.
17665: Format saved.
17666: Libra was unable to add all of the formats to the screen.
17667: Libra was unable to create the text browser.
17668: Libra encountered an error while processing the text browser.
17669: The diskette is write protected.  Please move the write protect
tab to the "closed" position.
17670: Libra encountered an error while opening the output file.
17671: Libra encountered an error while trying to append output to the
report output file.
17672: Libra was unable to close the report output file.
17673: The output file already exists.  Would you like to replace it, or
append new information to the end?
17674: Place a diskette in the drive.
17675: Libra could not re-order the fields.
17676: Libra encountered an error when trying to create an Export format
definition file.
17678: Libra was unable to close the Export format definition file.
17679: Libra was unable to open the Export format definition file.
17680: There is not enough room on the floppy disk to store your
output. Please insert another diskette.
17681: There is not enough room on your hard disk to store your output. Insert a
floppy diskette, prefix your filename with the drive letter, and press Enter.
17682: There is not enough room on your disk to store your output. Enter another
filename and change the drive letter.
17683: The floppy drive specified in the filename you entered is not
available. Please try another drive letter in your filename.
17684: The diskette is unusable. Please insert another diskette.
17685: Please insert a diskette.
17686: The path name you entered is not on the floppy disk. Enter a
different path name.
17687: The path name you entered is not on the hard disk. Enter a different
path name.
17688: Your hard drive is not ready. Specify another hard disk, or enable
the hard drive.
17689: The hard drive specified in the file name is invalid. Specify
another hard disk.
17690: Libra has detected a serious problem with your hard drive.
17691: This is a protected format and only certain fields on the
Setup screen can be changed. To change the fields, make a copy of this
format.
17692: This format is protected and cannot be used in Auto Calc mode.
17693: Setup information saved.
17694: Libra has encountered an error while processing the Data Range
Selection screen.
17695: Libra has encountered an error while processing the Format Name
screen.
17696: Libra encountered an error while trying to perform a sort.
17697: Do you what to stop deleting formats?
17698: Libra was denied access to your hard drive.
17699: Libra was denied access to your floppy disk drive.

17700: Listing formats...\c
17701: The Starting Position is beyond the field length.
17702: Libra encountered an error while creating the Output Setup
screen.
17703: Libra encountered an unexpected error while processing the
Output Setup screen.
17704: Libra could not initialize an Output Setup record.
17705: Please insert a floppy diskette for storing your Report/Export
output.
17706: The floppy diskette contains one or more station files.
Please replace it with another disk.
17707: Insert a diskette in Drive-A.
17708: Insert a diskette in Drive-B.
17709: No records selected.
17710: Libra failed to open the LST device for output.
17711: There may not be enough free disk space to store the
output file.\n\nWould you like to try and output to your disk anyway?
17713: Select "Detailed" for Report Type since this Shipment Report Format
includes the Shipment Number and/or Shipment Sequence Number field.
17714: The Beginning Position for this field must be one.

17800: "Pounds Per Unit" or "Number of Units" cannot be imported
when the "Weight" field is used.
17801: The import format contains a field which cannot be used with
the label you have selected.
17802: Please enter a Record Length for this format.  Press F10=Options, and
then select Change Import Setup to specify the Record Length.
17803: Libra encountered an error while trying to create the Import
Error Correction screen.
17804: Libra encountered an error while trying to load the Import
Master Fields array.
17805: Libra was unable to process the Import Correction screen.
17806: Shipment skipped.
17807: Digits only are acceptable for this field.
17808: The field value is too small, too large, or non-numeric.
17809: The field contains an invalid value.
17810: There are not enough characters in the field.
17811: Month entered is not numeric, or is not between 1 and 12.
17812: Day entered is not numeric, or is not between 1 and 31.
17813: Year entered is not numeric, or is not between 94 and 99.
17814: Xpress Saturday and Select Delivery Service cannot both be "Y."
Change one of these fields to "N."
17815: The imported shipment is attempting to change the shipper's account
number.  Correct this situation by changing the Bill To selection or
placing zeroes in the Bill To Account field.
17816: Insurance amounts must be marked as Declared value or Insured
value.  Please change the insurance amount to zero or change the
insurance type to D or I.
17817: Insurance amount must be greater than zero when the insurance type is
I or D.  Please specify an insurance amount or change the insurance type to N.
17818: Invalid value.
17819: Number of days for the month are incorrect.  Change the
month, day, or year.
17820: Number of labels cannot be zero.
17821: The field contains one or more non-printable characters.

17822: NOTE - Length entered must be the full length of the record,
in bytes.\n\nIf your records are terminated by a carriage return
or line feed, or both, the length must include those characters.
\n\nAll record lengths must be equal.
17824: The format selected contains a COD field. COD processing
is currently unavailable from your system.\n\nPlease select another
format or remove the COD fields from this format.
17825: The Bill To Account and Bill To Code fields must be used together.
17826: Total weight for this shipment exceeds capacity. Change the
number of units or the pounds per unit.

17900: The sorting of the Shipment files has failed.

18000: General Failure.
18005: Hardware setup is incorrect.
18010: No Carrier. Check the phone connection.
18015: No Dial Tone. Check the modem connection.
18020: The line is busy.
18025: No answer. Check the number.
18030: No response from modem or no answer. Check the modem connection and
the phone number.
18035: Unrecoverable Printer error.
18040: Cannot open Inquiry Setup file.
18045: Unable to prepare system for phone call.
18050: Unable to prepare modem.
18055: Unable to connect with FOCUS.
18060: FOCUS processing error.
18065: Setup files rebuilt. Okidata printer assumed.
18070: Error reading PRINTER.CTL.
18071: Error closing PRINTER.CTL.
18072: Seek error using PRINTER.CTL.
18073: Error opening PRINTER.CTL.
18074: Error saving either lispc00.ctl, lispd00.ctl, or lisss00.dat.
18075: Error returning filesize for PRINTER.CTL.
18076: Error initializing setup entry screen.
18077: Warning - Printer setup has been changed.
18078: Error swapping files.
18079: Error Doing Printer Popup.Load.
18080: Inquiry.HLP contains no help data.
18081: Inquiry.HLP does not exist.
18082: Please complete the fields in the "Setup" option prior to
calling Airborne.
18083: A manifest for the current shipment file cannot be printed using this
option. Use Day End to print a Manifest for the current shipment file.
18084: An Invoice/Remittance Advice for the current shipment file cannot be
printed using this option.  Use Day End to print an Invoice/Remittance Advice
for the current shipment file.
18085: File Delete Canceled.
18086: Printing Rate Report(s).
18087: No Rating Files Found!
18088: Record
18089: does not exist.

19000: Press F1, print the screen, and call Airborne's Customer Automation
Support, at 1-800-I-AM-HELP for assistance.
19010: Please try again.
19020: Call Airborne's Customer Automation Support, at 1-800-I-AM-HELP.
19022: Customer setup file rebuilt. Defaults assumed. Process resuming. \
Confirm customer setup entries.
19025: Check hardware setup. Select "Setup" from the File Management Menu and then
press F4 to access the Hardware Setup screen.
19030: Check the printer. Is it out of paper or not "on-line," is the printer cable
connection loose? Press Esc to cancel printing or any key to retry.
19032: Processing may continue, but you should backup and delete some
files soon to ensure successful processing.


19900: Abandon Input?
19901: Do you want to save your changes?
19902: Do you want to save the new Receiver?
19903: Changes were made to the Receiver, do you want to save them?

19910: Day End Step 1 Rename.
19911: Day End Step 2 Copy.
19912: Day End Step 2 Rerate.
19913: Day End Step 2 Rename.
19914: Day End Step 3 Archive.
19915: Day End Step 3 Rename.
19916: Day End Step 4 Rename.

19917: Error writing Short Cut key to index file.
19918: Error deleting Short Cut key from index file.
19919. Error searching for key in Short Cut index file.
19920: Error creating Short Cut File.
19921: Error opening Short Cut File.
19922: Error writing Short Cut.
19923: Error positioning within Short Cut File.
19924: Error deleting Short Cut.
19925: Error updating Short Cut.
19926: Error closing Short Cut File.
19927: Rebuilding Short Cut File...\c
19928: Error processing Short Cut List.
19930: Initializing Short Cut Entry Screen.
19935: Initializing Short Cut List.
19937: Duplicate Short Cut Key.
19938: Please enter a new Short Cut key.
19939: Please enter a Short Cut key.
19940: Your installation of Libra International is not configured to print
Commercial Invoices. To do so, change the "Commrl. Invoice" field on the Set
Up screen to "Y".
19941: Error creating Short Cut index file.
19942: Error rebuilding Short Cut index file.
19943: Error closing Short Cut index file.
19944: Error building Short Cut row.

19950: Exiting without saving will cause the shipment number to be reset to
000000000.  Do you want to save your changes?
19951: Invalid shipment number.  Return to the Label Set Up window (F6) and
enter a valid shipment number.

19953: Enter a valid shipment number to resume printing. Do you
want to resume printing?
19954: Confirm that the labels are correctly aligned in the printer.
Do you want to continue printing?

19955: Date must be January 1, 1994 or later.
19956: Invalid date.  Return to the Label Set Up window (F6) and enter today's
date.

19960: Invalid Airborne Express Customer Number.

19970: Error opening Inbound reporting file.
19971: Error closing Inbound reporting file.
19972: Error renaming Inbound reporting file.
19973: Error adding to Inbound reporting file.
19974: Error reading Inbound reporting file.
19975: Error browsing Inbound reporting file.
19976: Error seeking Inbound reporting file.

19977: Error reading the Inbound Setup file.  Default values will be
assumed.
19978: Error saving the Inbound Setup file. Setup changes will not be
saved.
19979: Error initializing the Setup information.
19980: Error initializing the Setup screen.
19981: Error initializing the F10 Options screen.

19982: Error opening Inbound text export file.
19983: Error closing Inbound text export file.
19984: already exists.  Overwrite?
19985: Error adding to Inbound text export file.

19988: Do you want to cancel the current printing job?

19991: Unable to open source file.
19992: Unable to open destination file.
19993: Error reading from source file.
19994: Error writing to destination file.
19995: Error getting date/time stamp for source file.
19996: Error getting date/time stamp for destination file.
19997: Error closing destination file.

20000: Creating Shipper's Reference File.
20001: Opening Shipper's Reference File.
20002: Writing Shipper's Reference.
20003: Positioning within Shipper's Reference File.
20004: Deleting Shipper's Reference.
20005: Updating Shipper's Reference.
20006: Closing Shipper's Reference File.
20007: Initializing Shipper's Reference Entry Screen.
20008: Initializing Shipper's Reference List.
20009: Error while flushing Shipper's Reference data file.
20010: Error with file integrity.
20011: The Shipper's Reference does not exist. Add it?
20012: Error while flushing Shipper's Reference index file.
20013: Error adding to Shipper's Reference data file.
20014: Error adding to Shipper's Reference index file.
20015: Error deleting from Shipper's Reference data file.
20016: Error deleting from Shipper's Reference index file.
20017: Creating Shipper's Reference Index File.
20018: Opening Shipper's Reference Index File.
20019: Error opening Shipper's Reference import file.
20020: Error closing Shipper's Reference import file.
20021: Error reading Shipper's Reference import file.
20022: Error rebuilding Shipper's Reference index.

20100: The Routing file could not be accessed.
20101: The Customer Data File could not be read.
20102: The Printer Control file could not be read.
20103: The Customer Data file could not be updated.
20105: The Airbill Entry screen could not be initialized.

20110: The Insert Form Request window could not be initialized.
20111: The Enter Shipment Number window could not be initialized.
20112: The next Shipment Number is a duplicate.  Advance the labels to a number
that has not been used.  The next unused number should be
20120: Sorry, Libra cannot process a shipment to this zip code.  Please check
the zip code or call your station.
20121: Number of "Pieces" can not exceed "Weight."
20122: The shipper's reference should only contain numbers.
20123: The shipper's reference is less than the required length.
20124: Bill To must be Sender when COD is selected.
20125: Full Insurance is not available on a Letter.
20126: Shipment value is greater than the Full Insurance limit.
Call your Airborne station.
20127: Shipment value is greater than the Declared Value limit.
Call your Airborne station.
20128: Shipment value is greater than the Declared Value limit for a Letter.
20129: Hold at Airborne service is not available for Xpress Saturday.
20130: Select Delivery service is not available for this weight.
20131: Select Delivery service is not available for this Zip Code.
20132: Xpress Saturday is not available for this zip code.  Please contact
your Airborne station for options.
20133: The pickup date can be from today to two weeks from now.
20134: The Multipiece-shipment feature is not available with an entry
greater than one in the "Pieces" field.
20141: The Zip Code is not in the receiver's State.  Do you want to
change this Zip Code?
20142: Invalid Zip Code.  Misroute fees will be assessed.  Do you want to
change this Zip Code?
20143: The weight is greater than the maximum unconfirmed weight. Do you
want to use this weight?
20144: The Shipper's Reference is not on the reference list.  Do you want to
change the Shipper's Reference?
20145: You have requested Xpress Saturday, but the pickup date is not Friday.
 Do you want Xpress Saturday and this pickup date?
20146: The Pounds Per Unit is greater than your maximum unconfirmed
weight.  Do you want to use this number of Pounds Per Unit?

20150: Call your Airborne station to arrange for special handling of shipments
with values exceeding $5,000.

20200: Do you want to view and confirm each shipment?
20201: Do you want to void this shipment?
20202: Do you want to unvoid this shipment?
20203: Reprint previously printed labels?\c
20204: Initializing shipment browse screen.
20205: Initializing shipment pick list.
20206: Initializing options pick list.
20207: Initializing shipment display screen.
20208: Initializing progress box.
20209: Initializing confirmation box.
20210: Initializing shipment block select box.
20211: Initializing shipment search box.
20212: MIXED SHIPMENT TYPES SELECTED.  You have selected both COD and non-COD
shipments.  Only one shipment type can be printed at a time.
20213: Print a label for alignment?
20214: No shipments selected for printing.
20215: No shipment number has been assigned to this sequence number.  To print
a label for this shipment, please change to "Shipment Number Calculate mode"
on the CustData screen.
20216: Out Of Memory.  Cannot compute gross charges.  Normal charges will be
printed. Please call Airborne's Customer Automation Support at 1-800-I-AM-HELP.
20217: PAUSE PRINT Key is active.  Most lengthy reports can be stopped by
pressing Esc or Cancel.
20218: Error updating shipment file header.
20219: Error deleting shipment number from control file.
20220: Error reading customer data file.
20221: Error calculating gross charges.
20222: Error on shipment browse search.
20223: Error on shipment block select.
20224: Error voiding/unvoiding shipment.
20225: Please enter a valid Airborne customer account number for this
3rd Party shipment.
20226: A Shipper's Reference containing one or more "letters" was found
in the import file; references should consist of numbers only.
This Reference will be skipped.  Continue importing?
20227: A Shipper's Reference less than the required length was found in the
import file.  This Reference will be skipped.  Continue importing?
20228: Please enter the receiver's street address.
20229: Please enter the receiver's state.
20230: Please enter a Zip Code.
20231: The shipper's reference contains non-printable characters.
20232: A Shipper's Reference containing non-printable characters was found
in the import file.  This Reference will be skipped.  Continue importing?
20233: The Shipper's Reference file is full.  Some references must be deleted
before any more can be added.
20234: Do you want to change the pickup date for this shipment? (Y/N)
20235: Error while changing the pickup date.
20236: Initializing shipment date select box.
20237: Error on shipment date select.
20238: Error changing shipment pickup dates.
20239: Initializing date change window.
20240: Non-invoiced shipments cannot be printed with the current label. Change
labels to Barcoded 880 or Non Barcoded 882.
20241: No shipments to browse.\c
20242: Initializing status box.
20300: Page break on subtotals?
20301: Double space report?
20302: Complete field.
20303: Shipment exists.  Try again?
20304: This function deletes the current Inbound shipments and creates a
new Inbound file.  Continue?
20305: Insert plain paper in printer and align perforation with top of
ribbon shield.  Continue?
20306: There are no primary shipments in the selected file(s).  No report
created.
20307: The Weight is being changed to match the scale weight.
20308: The scale is not responding.
20309: The scale is not responding.  Please enter the pounds per unit
manually.

20400: Re-opening Current Routing file
20401: Re-opening Future Routing file
20402: Opening Current RCD file
20403: Opening Future RCD file
20404: Allocating memory for Current RCD tables
20405: Allocating memory for Future RCD tables
20406: Reading Current RCD file
20407: Reading Future RCD file
20408: Opening Current OFS file
20409: Opening Future OFS file
20410: Allocating memory for Current OFS tables
20411: Allocating memory for Future OFS tables
20412: Reading Current OFS file
20413: Reading Future OFS file
20414: Opening Current ZDX file
20415: Opening Future ZDX file
20416: No Current Routing files exist
20417: Closing Future Routing files
20418: Closing Current Routing files
20419: Current RCD file does not exist
20420: Future RCD file does not exist
20421: Current OFS file does not exist
20422: Future OFS file does not exist
20423: Current ZDX file does not exist
20424: Future ZDX file does not exist
20997: Printing Paused, press Enter to continue.
20998: Filename reserved for use by Libra.
20999: Enter another file name.
21000: Changing the setup requires that the current FOCUS session be terminated.
 Proceed?
21001: FOCUS did not answer the phone call within the time limit.
21002: Unable to login to FOCUS. Possible causes are - your FOCUS ID/Security
Code is already in use, the setup is incorrect, the phone line is noisy or
inoperative, or the FOCUS system is not available.  Try again or contact
Airborne for help.
21003: This FOCUS session will be terminated unless you press any key now.
21004: Libra disconnected from FOCUS.
21005: File exists; overwrite?
21006: Unable to connect with Compuserve's Best Access.
21007: Best Access has responded with a phone number.
21008: No dial tone, check the phone line.
21009: Phone lines into FOCUS are busy, please try again later.
21010: Dialing canceled at your request.
21011: Hanging up the phone line.
21012: Connecting to FOCUS.
21013: Disconnecting from FOCUS.
21014: Connecting to Compuserve's Best Access
21015: Logging out of Compuserve's Best Access
21016: Printing cancelled at your request.
21017: Best Access is busy, please try again.
21018: Best Access did not answer.  Try again or call Airborne for help.
21019: Please use Best Access (F6 on the Setup screen) to get the local
telephone number.
21020: Requesting phone number from Best Access.
21021: Can't allocate memory for the screen comparison buffers.
21022: FOCUS login cancelled at your request.
21023: Please enter a secondary phone number.
21024: When ready to proceed...
21025: Please enter a valid Airborne customer.
21026: Please enter a valid billing type.  Enter S for Sender, R for
receiver, or T for third-party billing.
21027: Please enter a date that is within the past week.
21028: Please enter the origin zip code.
21029: Please enter the destination zip code.
21030: Please enter the origin's Airborne station code.
21031: Please enter the destination Airborne station code.
21032: Please enter the shipment number to be traced.
21033: When the Bulletin Board security screen is displayed, enter
"LIBRA.CUST" for the Mail Id and "LIBRA" for the Password.
21034: Dialing Time-out can be from 30 to 255 seconds.
21035: The FOCUS system did not accept your userid and/or password.  Contact
Airborne at 1-800-I-AM-HELP for assistance.
21501: An error occurred while opening the setup file. Program stopped.
21502: An error occurred while reading the setup file. Confirm Setup
information before proceeding.
21503: An error occurred while writing the setup file. Setup changes
made during this session will not be saved.
21504: Program could not be initialized and will not run.
21505: Unable to open Primary Phone File.
21506: Unable to read Primary Phone File.
21507: Unable to write Primary Phone File.
21508: Unable to open Secondary Phone File.
21509: Unable to read Secondary Phone File.
21510: Unable to write Secondary Phone File.
21511: Unable to create Dial Progress Box.
21512: Unable to Initialize selected serial port.
21513: Unable to create terminal window.
21514: Variable dictionary for the script could not be initialized.
21515: Script could not be initialized.
21516: Unable to open the Best Access output file.
21517: The area code and/or prefix is unknown to Compuserve.
21518: This program must be called with 1 parameter --
LSSCM15 <Best Access Phone Number >.
21519: Unable to initialize the Best Access screen.
21520: Compuserve Best Access timed-out.
21521: Unable to start the Best Access program.
21522: Unable to open network phone file.
21523: Unable to read network phone file.
21524: Unable to write network phone file.
21525: Unable to open Best Access output file.
21526: Unable to read Best Access output file.
21527: Unable to initialize Extended Setup Screen.
21528: Unable to initialize modem.
21529: Unable to set modem time-out values.
21530: Modem rejected customer defined setup string.
21531: Unable to set modem connect time limit.
21532: Unable to dial phone number.
21533: Insufficient memory to invoke Best Access.
21534: Unable to write Best Access parameter file.
21535: Unable to read Best Access parameter file.
21536: Unable to run Best Access program.
21537: An error occurred while writing the screen to disk.
21538: Printing stopped due to error.  If using Drive A or B,
check the diskette and try again.  If using Drive C, call Airborne
for assistance.
21539: Unable to open the "print to" file.
21540: Unable to create phone edit window.
21541: Unable to create the password screen.
21542: Unable to create the filename screen.
21543: Unable to create the entry screen.
21544: Phone numbers are unavailable.
21545: Please enter a Primary Phone Number.
21546: Set the number of "Attempts" to at least 1.
21547: Set the Inactive Time-out field to 60 seconds or greater.
21548: Unable to create the setup screen.
21549: Error initializing the Customize Options screen.
22000: The supply order file is unusable.
22001: Could not find valid order file. File will be created using default values.
22002: Could not find valid order file.  Unable to create new file.
22003: Unable to build supply item list.  Program stopped.
22004: Printer could not be determined.  If ordering a printer ribbon, please
enter the printer name/type.
22005: Unable to build "Print When?" field pick list.
22006: Unable to create supply order scrolling entry screen.
22007: Unable to create main supply order entry screen.
22008: Unable to save order changes to disk.  Print the current order before you exit.
22010: The last order form saved will print at DayEnd.
22011: No order to print.
22022: Driver's disk was cancelled.\n\n
22023: Transmission of shipment data was cancelled.\n\n
22024: Driver's manifest was cancelled.\n\n
22025: Supply order was cancelled.\n\n
22026: Optional manifests were cancelled.\n\n
22027: Shipment reporting was cancelled.\n\n
22028: Shipment export was cancelled.\n\n
22029: Remittance Advice was cancelled.\n\n
22030: Terminal disk was cancelled.\n\n
22050: Do you want to continue with your scheduled Day End events?
22052: Do you want to continue reprinting Day End?
22100: Error initializing Screen Banner.
22200: The open-shipment file was empty. File erased during Day End.
22201: No shipments for today's Day End.
22202: Some labels have not been printed.  Please use the
Void/Print screen to print or void them before running DayEnd.
22203: No open shipment file.  To ship, select Ship from the Main
Menu.  To print additional manifests and other reports, select Reprint from
the DayEnd Menu.
22204: Shipment Export unavailable (probably due to low memory conditions).
Select Export from the Utility menu to export today's closed shipment file.
22205: No export file created - no shipments to export.
22206: Unable to read supply order data.
22207: Unable to initialize order data.
22208: Unable to read invoice file.
22209: Unable to write invoice file.
22210: Unable to load zone data.
22211: Scanning the open shipment file.
22212: Printing shipper-scheduled reports.
22213: Processing shipper-scheduled shipment export.
22215: The diskette you inserted is either not a back-up diskette or a back-up
diskette for another Libra system. Do you want to use the diskette anyway?
22216: Copying files.
22217: Unable to back up Shipper Setup file.
22218: Please remove the diskette.
22219: Unable to back-up data-transmission initialization file.
22220: Unable to back-up shipment-report format file.
22221: Unable to back-up base-rate file.
22222: Unable to back-up multi-invoice file.
22223: Unable to back-up export-format file.
22224: Unable to back-up receiver-import file.
22225: Unable to back-up validator-format file.
22226: Unable to back-up Inquiry stream file.
22227: Unable to back-up Inquiry Airborne phone file.
22228: Unable to back-up Inquiry network phone file.
22229: Unable to back-up Inquiry Airborne script file.
22230: Unable to back-up Inquiry network script file.
22231: Unable to back-up Inquiry access script file.
22232: Unable to back-up Inquiry access batch file.
22233: Unable to back-up Inquiry Airborne keymap file.
22234: Unable to back-up Inquiry network keymap file.
22235: Unable to back-up Supply Order file.
22236: Unable to back-up shipper's reference file.
22237: Unable to perform rate update.
22238: Unable to write to printer.  Please check power, on-line status,
paper supply, and cables.
22240: Unable to read current routing information.
22241: Printing...
22242: Unable to write to the Validator.  Please check power, on-line status,
paper supply, and cables.
22243: Unable to write to the Validator.
22244: Unable to write to shipment file.  The Shipment file contains the
maximum number of shipments.  Run DayEnd.
22245: Number of labels cannot be zero.
22246: Unable to create Print Shipment Label box.
22247: Stop printing?
22248: Error confirming shipment.
22249: Unable to create Confirm/Edit box.
22250: Unable to open Custom Screen Settings file.
22251: Unable to create Custom Screen Settings file.
22252: Unable to read Custom Screen Settings file.
22253: Unable to write Custom Screen Settings file.
22254: Unable to close Custom Screen Settings file.
22255: Error adding a piece to a multipiece shipment.
22256: Error reading shipment-file size.
22257: Remove document from validator and insert the one for the next piece.
22258: \nNo help available.\c\n
22259: Prorating consolidated multipiece shipment...
22260: Stop processing shipments?  (Shipments can be printed
later or voided from the Void/Print screen.)
22261: Do you want to save your changes before leaving this screen?
22262: Stop printing multipiece shipment?   (Remaining shipments can be
printed later or voided from the Void/Print screen.)
22263: Non barcoded labels cannot be used in Calculate mode.
22264: The dimensions you entered are very large. Do you want to continue
with these dimensions?
22265: COD is not available in "Enter" mode.  Clear the COD Amount field or, to
send a shipment COD, change to "Calculate" mode.
22266: Unable to create Customize Label box.
22267: Cannot read the Validator Control file.\c  Default format will be used.\c
22268: Multiple labels are not available in Shipment Number "Enter" Mode.
22269: Unable to create Date/Time box.
22270: The date you entered is before Libra's last Day End.  Are you sure
the date is correct?
22271: The date you entered is more than five days past Libra's last Day
End.  Are you sure the date is correct?
22272: This shipment was voided.  You cannot Confirm/Edit the shipment.
22273: LIBRA cannot process a shipment to this zip code.  Contact Airborne.
22274: Unable to retrieve existing\cCustomize Screen Settings information.\c
Default settings will be used.\c
22275: Unable to create Customize Prompts box.
22276: Unable to create Customize Field box.
22277: Do you want to process your last shipment before canceling?
22278: "Print Later" mode is unavailable when entering shipment numbers.
22279: COD shipments can't be processed while suppressing labels.  Label
suppression can be disabled on the Customer Data screen.
22280: Calculate shipment number mode is unavailable while suppressing
labels. Label suppression can be disabled on the Customer Data screen.
22282: Length dimension cannot be 0. To use dimensional weight, you must
enter all 3 dimensions.
22283: Width dimension cannot be 0. To use dimensional weight, you must
enter all 3 dimensions.
22284: Height dimension cannot be 0. To use dimensional weight, you must
enter all 3 dimensions.
22290: Libra was unable to verify the Shipper's Ref with the RefList file.
22291: Libra cannot process a package this large. Please contact Airborne.
22295: Unable to create Change Modes box.
22301: Short Cuts are not available.
22302: Hazardous material shipments are not permitted when shipping C.O.D.
22303: The Multipiece option is unavailable when shipping Bill To
Receiver, Bill To Third Party, or C.O.D.
22304: Libra cannot print "Later" when shipment number mode is "Enter."
Mode is being changed to print "Now."
22321: Receiver Company Name, Street, City, and State must be displayed
on the Ship/Add screen when the Receiver ID is displayed.  Changes
will be made to display these fields.
22322: You have changed the setting (Prompt, Suppress, or Duplicate) for one
of the Dimensions fields.  The settings for the other Dimension fields will now
be set to match your change.
22323: You have changed the setting (Prompt, Suppress, or Duplicate) for one
of the COD fields (COD Amount or COD Form of Payment).  The setting for the
other COD field will now be set to match your change.
22324: You have changed the setting (Prompt, Suppress, or Duplicate) for one
of the Billing fields (Bill To or Bill To Account).  The setting for the
other Billing field will now be set to match your change.
22325: You have changed the setting (Prompt, Suppress, or Duplicate) for one
of the Insurance fields (Insurance Amount or Insurance Type).  The
setting for the other Insurance field will now be set to match your change.
22326: "Dimensions" cannot be specified for shipments billed to a
Receiver or 3rd Party.
22327:  "Dimensions" cannot be specified for C.O.D. shipments.
22328: If the "Dimensions" fields are Suppressed, their Default
values must all be zero or all greater than zero.

22340: Changes made in Change Import Setup have also been discarded.

22350: Can't process the Confirm/Edit Screen./c
22351: Error initializing B-Tree Filer.
22352: Libra encountered an error while processing the Change Modes
screen.
22353: Libra encountered an error while processing the Date Time
screen.
22354: Libra encountered an error while processing the Multipiece
screen.
22355: Libra encountered an error while processing the DayEnd Reprint
screen.
22356: Libra encountered an error while processing the Detail Charges
screen.
22357: Non C.O.D. shipments require the changing of labels in the printer.
Do you want to continue processing this shipment?
22358: C.O.D. shipments require the changing of labels in the printer.
Do you want to continue processing this shipment?
22359:  Libra encountered an error while trying to run the Customize
Screen program.

22400: Unable to create Day End Reprint box.
22401: Invalid date range.  "From Date" must be earlier than "To Date."
22402: No closed shipment files are available.
22403: No closed shipment files were found within the selected date range.
22404: Select either Transmission or Disk.
22405: Choose "Disk" or "Transmit"
22406: You have reached the 999 piece limit for a multipiece shipment.
 Press ESC to print the labels and then begin another shipment.
22407: Unable to prorate the Multipiece Shipment.
22408: You must select at least one report to process.

22500: Unable to back-up Shipment Report formats file.
22501: Unable to back-up Shipment Export formats file.
22502: Unable to back-up Shipment Import formats file.
22503: Unable to back-up DIMS Packages formats file.
22504: Unable to back-up PSD format file.
22505: Unable to back-up Short Cuts data file.
22506: Unable to back-up Short Cuts index file.
22507: Unable to back-up the Inbound Scan Setup file.

23350: Duplicate shipment number found in the
current shipment file.  Please run Day End to correct the problem.
23351: Cannot rebuild Shipment Number Control file.

23352: Libra encountered an error while processing the Mass Print Setup box.
23353: Libra encountered an error while creating the Mass Print Setup box.
23354: Building Mass Print Index...
23355: Stop building the Mass Print Index?
23356: Sorting Mass Print Index...
23357: Libra encountered an error while opening the Mass Print sort file.
23358: Libra encountered an error while making the Mass Print sort file.
23359: Libra encountered an error while reading the Mass Print sort file.
23360: Libra encountered an error while writing the Mass Print sort file.
23361: Libra encountered an error while closing the Mass Print sort file.
23362: Please enter at least one Mass Print code.
23363: Please re-enter the Mass Print codes - one or more is not valid.
23364: The format for Mass Print processing is missing.
23365: Libra was unable to start Mass Print.
23366: Libra cannot process Mass Print because the receiver file does not exist.
Enter receivers and specify Mass Print Codes using Receiver Maintenance or
Receiver Import prior to running Mass Print.
23367: Do you want to cancel this Mass Print?

23400: Shipment Number Control - Internal Error.\c
23401: Shipment Number Control - Open Failure.\c
23402: Shipment Number Control - File Not Open.\c
23403: Shipment Number Control - conversion error.\c
23404: Shipment Number Control - No Key Found.\c
23405: Shipment Number Control - Delete Error.\c
23406: Shipment Number Control - Add Key Failed.\c
23407: Shipment Number Control - File Opened Error.\c
23408: Shipment Number Control - Bad Index File.\c
23409: Shipment Number Control - Index Create Failed.\c
23410: Shipment Number Control - Close Index Failed.\c
23411: Shipment Number Control - File Rebuild Failed.\c
23412: Shipment Number Control - File I/O Error.\c
23413: Unable to open Standard Package Dimension file.  Processing will
continue with a new Standard Package Dimension list.
23414: Unable to create Standard Package Dimension File.
23415: Unable to read Standard Package Dimension file.  Processing will
continue with a new Standard Package Dimension list.
23416: Unable to write to the Standard Package Dimension File.
23417: Unable to close Standard Package Dimension File.
23418: Unable to process the Standard Package Dimension list window.
23419: The Standard Package Dimension list is full.  Please delete a
standard package dimension from the list before adding another.
23420: Unable to process the Standard Package Dimension window.
23421: Unable to create the Standard Package Dimension list window.
23422: Unable to create the Standard Package Dimension window.

24000: Do you want to view and confirm each format deletion?
24001: Do you want to delete this format?
24002: Deleting the selected formats...\c
24003: Libra encountered an error while adding a format.
24004: Libra encountered an error while replacing a format.
24005: Libra encountered an error while reading a format.
24006: Error opening the Shipment Report format file.
24007: Error closing the Shipment Report format file.
24008: The Standard formats cannot be deleted or changed.
24009: Libra encountered an error while "seeking in" the format file.
24010: Libra encountered an error while trying to create the Shipment Report
format file.
24011: Libra encountered an error while creating the Format Display screen.
24012: Press Y if you wish to look at and confirm the deletion of each
format you selected.  Press N if you want all selected formats to be deleted
without confirmation.

24100: Please enter a Column number greater than zero.
24101: Beginning Position plus Length is greater than the maximum width.
24102: Please enter a Length greater than zero.
24103: The field Length is too large.
24104: The fields are overlapping in the format.
24105: Please enter a name in the Format Name field.
24106: Sort Orders must be unique.
24107: This format is larger than the specified maximum width.  Do you
want to change the format?
24108: The Column fields are not in ascending order.
24109: The length of all sorted fields cannot exceed 255 characters.
24110: The field Length is too small.
24111: You must include at least one field in the format.
24112: Both the Column and Sort Order fields cannot be equal to zero.
24113: The field length is too large.
24114: This Shipment Export format does not include either the Shipment
Number or Shipment Sequence Number.  This may make it difficult to
identify your shipments.  Do you want to change the format?

24200: Reading Shipment Data...\c
24201: Sorting Shipment Data...\c
24202: Printing Shipment Data...\c
24203: Creating Screen Browser File...\c
24204: Writing Shipment Data...\c
24205: Are you sure you want to cancel this Shipment Report?
24207: Searching for Shipment Files...\c
24208: No shipment files were selected.  Please select at least one
shipment file or press Esc to cancel.
24209: Libra could not create the Shipment File Selection screen.
24210: Libra could not process the Shipment File Selection screen.
24211: Libra could not create the Shipment File list.
24212: No shipment files were selected within the Date Range entered.
24213: You must select at least one shipment file type for processing.
24214: Are you sure you want to cancel this Shipment Export?
24215: Processing Shipment Reports...
24216: Processing Shipment Exports...

24300: Backing up Shipment Data...\c
24301: Restoring Shipment Data...\c
24302: Deleting Shipment Data...\c
24303: The Future Zip Code data base could not be accessed.

24400: Are you sure you want to cancel the current process?
24401: Libra encountered an error while accessing the Invoice Control
file.  The current Libra system date will be used from the Date ranges.
24402: Libra could not create the Date Range Selection screen.
24403: The "To" date must be the same as or later than the "From" date.
24404: There must be at least one field in the format for Recalculate
to work.  Add some fields by pressing F2.

24500: Libra could not create the Setup screen.
24501: Selecting an output format of Comma- Delimited will mean that your
Export columns may not be correct.  Are you sure you want to use
Comma-Delimited format?
24502: Libra could not process the Setup screen.
24503: The Beginning Position of the Shipper's Reference field must be
between 1 and 25.
24504: The Length of the Shipper's Reference field must be between 1 and
25.
24505: The Beginning Position plus the Length of the Shipper's Reference
field must be between 1 and 25.
24506: Libra encountered an error while trying to create the output for this
format.
24507: Libra could not read the Header information from a shipment file.
24508: You have cancelled the processing of a format.  Do you want to
continue with the next format?
24509: You must select at least one Shipment file type to use this format with.
24510: Libra cannot process Shipment Report or Shipment Export formats because
the Shipment File Linked List was not successfully created.
24511: Writing Shipment File Header Info...\c
24512: Converting Summary Reports...\c

24513: You have entered a C.O.D. amount in excess of the allowable
limit.  Please call your local Airborne station for assistance.
24514: Shipments must be Bill To Sender when label-printing is suppressed.
24515: Please enter a format name.

30000: Transfer of shipment data failed!\n\nTry to transmit again,
or make a driver's disk.
30001: Transfer of shipment data failed!\n\nPlease make a driver's
disk.
30002: Select Transmit to resend your shipments.\n\nSelect Disk to make a
driver's disk.\n\nPress Cancel to exit and remain in recovery mode.\n\nCall
Airborne Technical Support at 1-800-I-AM-HELP for assistance.
30003: Select Disk to make a driver's disk.\n\nPress Cancel to exit and remain
in recovery mode.\n\nCall Airborne Technical Support at 1-800-I-AM-HELP for
assistance.

30004: Preprinting Labels...
30005: You have entered incomplete shipment information for your preprinted
airbill(s); airbills will have to be completed manually before shipping.
Do you want to correct the incomplete airbills?
30006: An error occurred while processing the Preprint Print Labels dialog box.
30007: Unable to create Preprint Print Labels dialog box.

31001: Error opening the Disk Memo control file.
31002: Error writing to the Disk Memo control file.
31003: Error reading the Disk Memo control file.
31004: Error closing the Disk Memo control file.
31011: Loading...
31021: Disk error detected while checking for station files.
31022: Error deleting station file.
31023: Error reading station file.
31031: Disk error detected when checking for shipment files.
31032: Diskette unreadable.  Please insert another diskette.
31033: Diskette full.  Please insert another diskette.
31034: Copying...
31035: Remove backup diskette.
31036: Backup was cancelled.\n\n
32000: Libra could not create a subdirectory for the closed shipment
files. Day End will not run.
32001: Insufficient disk space to run Day End.  To continue, free up
32002: space by FIRST backing up and THEN deleting some shipment
files.
32003: The shipment file contained no shipments. Day End deleted the file.
32004: There are no shipments for today's Day End.
32005: Scanning the open shipment file...
32006: Some shipment labels have not been printed. Use the Void/Print option
to print the labels prior to starting Day End.
32007: Do you want to proceed?
32008: No open Shipment File for Day End. To open a file, select
SHIP from the Main Menu. To print additional manifests and
other reports, select Reprint from the Day End Menu.
32009: User Scheduled Day End Reporting in progress...
32010: Printing Supply Order...
32011: ABExport is unavailable (probably due to insufficient memory).
Please select ABExport from the Utility Menu to generate a text
file from this Day End's closed shipment files.
32012: No Manifest shipments processed today. No ABExport file created.
32013: Error deleting the open shipment file in Day End.
32014: Disk error while accessing the open shipment file.
32015: Disk error while getting the next shipment filename.
32016: Disk error while writing the shipment header record.
32017: If you cancel Manifest printing, you will not have a copy
to give to the Airborne driver.\n\nDo you want to print the
Manifest?\c
32020: Printing Manifest(s), and printing Remittance Advice(s) for invoiced
shipments...
32021: Printing Manifest(s)...
32022: Printing Remittance Advice(s)...
32023: Form alignment cancelled.  No report will print.
32024: Manifest cancelled.

32101: Disk error while accessing the Batch ID file.
32102: Disk error while accessing the Multi-Invoice control file.
32201: Disk error while creating the Final Rating file in Day End.
32202: Disk error while writing the Final Rating file in Day End.
32203: Disk error while accessing the Invoice Control file.
32211: Disk error while creating the Future Day shipment file in Day End.
32212: Disk error while writing the Future Day shipment file in Day End.
32213: Disk error while closing the Future Day shipment file in Day End.
32221: Disk error while creating the final rating file in Day End.
32222: Disk error while writing the final rating file in Day End.
32223: Disk error while closing the final rating file in Day End.
32224: Libra encountered a disk error while renaming the Day End files.
Please re-run Day End.
32225: Shipment file error while prorating in Day End.
32226: Day End cannot process the open shipment file because the
version number is incorrect.
32227: Suspend printing with the validator for this session?
32228: The open shipment file on the backup disk has been copied to
your Libra directory as
32229: The open shipment file on the backup disk is not the correct
version.  It cannot be restored.

32240: Print labels "Now," as each shipment is processed, or print them "Later"
from Void/Print?
32241: Cancelling will erase your default settings.  Do you want to cancel?
32245: Each shipment must be confirmed or voided before DayEnd can proceed.\n\n
Confirm - confirm current shipment.\n
Void - void current shipment.\n
Skip - leave current shipment unconfirmed.\n
Cancel - remaining shipments unconfirmed.

32301: Error renaming files in Day End.
32302: Error erasing files in Day End.
32400: Sorting...
32500: Insert a Driver's Disk in the disk drive.
32501: Remove the Driver's Disk.
32502: Retry the Driver's Disk?
32503: Skip Driver's Disk creation?
32504: Creating Driver's Disk...
32505: Processing...
32506: Printing driver's disk memo.
32511: Inserted disk is write protected.\nPlease insert another.
32512: Inserted disk has insufficient free space.  Please insert another.
32513: Cannot continue until a "good" disk is inserted.
32514: Diskette directory is full.  Insert another diskette.
32515: Disk error while creating the Station file.
32516: Disk error while checking the Driver's Disk.

32520: Pounds Per Unit cannot be zero.

32530: Libra encountered an error while opening the Import format definition
file.
32531: Libra encountered an error while creating the Import format
definition file.
32532: Libra encountered an error while writing the Import format
definition record.
32533: Libra encountered an error while closing the Import format
definition file.
32534: Libra encountered an error while deleting the error shipments file.
32535: COD shipments are unavailable.  Clear the COD Amount field to
process this shipment.
32536: No shipment data file has been specified.
32537: Shipment record length cannot be zero.
32538: The Record Length is too short.  Press F10=Options, and then select
Change Import Setup to increase the Record Length.
32539: Error processing the setup screen.
32540: Error processing the Enter Shipment Defaults screen.
32541: Libra was unable to open the shipment data file.
32542: Libra encountered an error while creating the shipment holding file.
32543: Libra encountered an error while creating the error shipments file.
32544: Shipments remain that cannot be processed.
32545: Libra encountered an error while creating the recovery control file.
32546: Libra encountered an error while reading the recovery control file.
32547: Libra encountered an error while opening the error shipments file.
32548: Recovery of error shipments was incomplete.
32549: Libra encountered an error while reading the error shipments file.
32550: Libra encountered an error while reading the shipment data file.
32551: Libra encountered an error while writing to the shipment holding file.
32552: Cannot find the import shipment file.
32553: Stop importing shipments?
32554: Error processing the Edit Shipment screen.
32555: Libra encountered an error while writing to the error shipments file.
32556: Libra encountered an error trying to run the Import program.
32557: Are you sure you want to delete the error shipments?
32558: Write the remaining shipments to the error file before canceling?
32559: Libra encountered an error while locating a shipment in the shipment
data file.
32560: Discard this shipment?
32561: Shipments with errors have not yet been processed.  Would you like to
Fix these errors now, Delete the shipments, or Retain the shipments for
fixing later?
32562: Shipments with errors still exist.  Would you like to Fix these errors
now, Delete the shipments, or Retain the shipments for fixing later?
32563: field was imported with invalid data.
32564: You are not authorized to ship COD.  The COD Amount and COD Form of
Payment fields cannot be saved as part of this format.
32565: You are not authorized to ship COD.  Shipments cannot be imported using
a format that contains either the COD Amount or COD Form of Payment fields.
32566: Libra encountered a problem when trying to create the Import Shipment
screen.
32567: Exiting before all shipments have been fixed will discard all remaining
shipments.  Do you want to exit?
32568: Libra encountered an error while locating a shipment in the error
shipment file.
32569: You have exceeded the limit of ten shipments per Day End for this
Libra Demonstration System.  To process more shipments, first run Day End.
32570: Libra Demonstration System\c\nThis Libra system is limited to ten
"test" shipments per Day End, and does not support actual shipping.  If
you have any questions, please contact your local Airborne station.
32571: Libra encountered an error while processing a single shipment.

65535: This feature has not been implemented yet.

99999: Dummy for index computing
