

  TCP/IP 2.0 for OS/2 Installation Addenda


        This file contains changes and corrections that apply to the
        installation procedure, and ships with all kits.

        Each kit can contain its own specific README file.  Please see
        the READ ME FIRST icon in the Read Me folder within the TCP/IP
        folder for more information about kit specific readme files.

        The information in this file is organized as follows:

          1. Pre-Installation steps for installing the Base Kit
          2. Global Kit Changes
          3. Changes to Base and Applications Kits


  1. Pre-Installation steps for installing the Base Kit

        If you already have a version of IBM TCP/IP installed and are
        installing the TCP/IP Version 2.0 for OS/2 Base Kit to a
        different directory from where the previous version is
        installed, you will need to modify your CONFIG.SYS before
        installing the TCP/IP Version 2.0 for OS/2 Base Kit.

        Following is an explanation of the changes that have to be
        made to your CONFIG.SYS file:

            1. Delete or comment out the line which contains the
               command to SET the ETC environment variable:

               REM SET ETC=C:\TCPIP\ETC

            2. Remove any references to the old TCP/IP's DLL directory
               from the LIBPATH statement.

            3. Remove any references to the old TCP/IP's directories
               from the following list of environment variables:

               SET BOOKSHELF=
               SET READIBM=
               SET HELP=
               SET PATH=

        If you do not follow these steps before installing, the
        install program will use the previously defined ETC
        environment variable from the CONFIG.SYS file to store TCP/IP
        configuration files.

        To correctly complete your installation, and to prevent
        the loss of configuration files in the event you erase the
        directories where you had previously installed TCP/IP, you
        must complete the following steps:

            1. Copy all of the files (including all of the
               subdirectories) from the previously installed TCP/IP's
               ETC directory to the newly installed TCP/IP Version 2.0
               for OS/2 Base Kit's ETC directory.  Example:

               [C:\]xcopy /s %etc%\*.* <TCPIP_Install_Path>\etc

            2. Update the line in your CONFIG.SYS which contains the
               command to SET the ETC environment variable.  This
               should be updated so that it points to the ETC
               directory off of the path where you installed the new
               copy of the TCP/IP Version 2.0 for OS/2 Base Kit.
               Example:

               SET ETC=<TCPIP_Install_Path>\ETC

            3. Follow steps #2 and #3 outlined above to update your
               CONFIG.SYS file.

  2. Global Kit Changes

        SAVING CONFIGURATION FILES:
        ---------------------------
        If you are installing TCP/IP 2.0 for OS/2 over an existing
        TCP/IP, you should save the configuration-related files in a
        directory other than the directory in which your current
        TCP/IP resides.  If you do not save these files, the TCP/IP
        installation process will overwrite them.  The configuration
        files you should save are:

        BIN\SETUP.CMD         BIN\SNALINK.CMD      BIN\TCPSTART.CMD
        BIN\X25.CMD           DOS\ETC\HOSTS        DOS\ETC\RESOLV
        DOS\ETC\PROTOCOL      DOS\ETC\SERVICES     ETC\BOOTPTAB
        ETC\INETD.LST         ETC\MIB2.TBL         ETC\PINGHOST.LST
        ETC\PROTOCOL          ETC\RPC              ETC\SENDMAIL.CF
        ETC\SERVICES          ETC\SLIP.CFG         ETC\X25*.CFG
        ETC\X25IP             ETC\X25RTE           ETC\X25DIR
        ETC\SNA*.CFG          ETC\OS2MVS.CFG       LAMAIL\NICKNAME.NAM


        INSTALLING SOFTCOPY PUBLICATIONS:
        ---------------------------------
        The TCP/IP publications in softcopy are included on the installation
        diskettes, and are installed in the TCPIP\DOC\ subdirectory when you
        install TCP/IP.

        When you install the Base or Applications kit, you must select
        to install the basic publications if you want them.  The
        "User's Guide" and "Installation and Administration" books are
        installed in BookManager format, while the "Command Reference"
        is installed in INF format.

        When you install the other kits, their publications are
        automatically installed in BookManager format.

        In either case, in order to read the BookManager publications,
        you need either IBM BookManager or the IBM Library Reader.  If
        you do not have one of these, you can select to install the
        IBM Library Reader when you install TCP/IP.


  2. Changes to Base and Applications Kits


        LAMAIL CHANGE:

        When you install the base kit, the LaMail application is no
        longer installed automatically.  Instead, you must select
        LaMail from the installation menu before you select INSTALL.

        Because there is a problem in LaMail installation, the LaMail
        icon appears in the TCP/IP folder whether or not you install
        LaMail.

