Logitech MouseWare 6.60 README File
(c) Copyright 1995 Logitech, Inc. All Rights Reserved.

************************************************************
This README file contains important information that
supplements the Logitech Mouse User's guide. To view or
print this file under DOS, use README.EXE which is supplied
on the installation disks. At the DOS prompt type the
following:

     README

If you are using Windows, run Write and open README.WRI. If
MouseWare has already been installed, double click on the
"Mouse ReadMe" icon in the Logitech SenseWare Group.
************************************************************

README FILE CONTENTS

1.   WHAT'S NEW IN THIS RELEASE
     1.1  Cloaking Feature
     1.2  DOS/Windows Mouse Drivers

2.   INSTALLATION NOTES
     2.1  Installing Over a Previous Version of MouseWare
     2.2  Uninstalling a Previous MouseWare Version 6.2 or
          Below
     2.3  How To Do a Network Install
     2.4  Manually Decompressing Application Files
     2.5  Installing the Mouse for DOSSHELL
     2.6  Installing MouseWare in Windows 95

3.   OS/2 Support
     3.1  Installing to OS/2 2.1 and WARP 3.0
     3.2  Win-OS/2 2.x Support
     3.3  DOS Under OS/2 2.x

4.   Windows NT Support

5.   DOS/WINDOWS DRIVER TECHNICAL NOTES
     5.1  MOUSEDRV.INI Parameters
     5.2  Loading the DOS Mouse Driver into High Memory
     5.3  Cloaking Feature

6.   DOS/WINDOWS UTILITIES TECHNICAL NOTES
     6.1  Smart Move Feature
     6.2  Changing the Keyboard Override

7.   ADI DRIVER (DOS VERSION ONLY)
     7.1  The AutoCAD Mouse Drivers (DOS ACAD Versions Only)
     7.2  Installing the AutoCAD Real Mode ADI Driver (DOS
          Only)
     7.3  Installing the AutoCAD Protected Mode ADI Driver
          (DOS Only)
     7.4  Using the ADI Driver
     7.5  Programming The Buttons

8.   TROUBLESHOOTING
     8.1  Installation Problems
     8.2  Manual Installation (T.BAT)
     8.3  Restoring AUTOEXEC.BAT, CONFIG.SYS, WIN.INI and
          SYSTEM.INI
     8.4  Bus Mouse Conflict
     8.5  Mouse Detection Problems
     8.6  Renaming Installed Directory
     8.7  Toshiba T3400 sub-notebooks and IBM ThinkPad

9.   APPLICATION DISK CONTENTS
     9.1  Mouse Driver Files
     9.2  Windows Program Files
     9.3  DOS Program Files
     9.4  Installation Program Files

____________________________________________________________

1.   WHAT'S NEW IN THIS RELEASE

     MouseWare 6.50 works with any Logitech or Microsoft-
     compatible pointing device(s). This release has several
     new features. Support for multiple pointing devices
     under Windows. Improved support for PS/2 pointing
     devices. Possibility to add and remove serial pointing
     devices without restarting Windows. Support of the IBM
     Trackpoint II stick. Advanced Power Management
     improvements.


1.1  Cloaking Feature

     The MouseWare 6.50 DOS mouse driver is designed to work
     in conjunction with a special interface program called
     "Cloaking". The CLOAKING.EXE interface program allows
     the DOS mouse driver MOUSE.EXE to be loaded in extended
     memory, freeing valuable conventional and upper memory
     for your DOS applications. CLOAKING.EXE is
     automatically installed during the standard MouseWare
     6.50 installation. For more information on "Cloaking"
     refer to the section: "Cloaking Feature."


1.2  DOS/Windows Mouse Drivers

     Advanced Power Management, which helps conserve battery
     power in laptops/notebooks, has been added.

     Both the DOS and Windows mouse drivers can use COM3 and
     COM4. See the section "How to Attach the Mouse to COM3
     or COM4".

     The DOS mouse parameters BON, BOFF, BLOW, and BHIGH are
     no longer supported. Use the AOFF, ALOW, AMEDIUM, and
     AHIGH parameters. DLEFT is no longer supported. See
     MOUSEDRV.TXT for more information on the mouse
     parameters.


2.   INSTALLATION NOTES

2.1  Installing Over a Previous Version of MouseWare

     With MouseWare 6.50, a Logitech SenseWare group is
     created to include the new program icons.

     Under Windows 3.1, you can also access the MouseWare
     Control Center via the Windows Control Panel.


2.2  Uninstalling a Previous MouseWare Version 6.2 or Below

     To remove a previous version of MouseWare from your
     disk, first install MouseWare 6.50. At the end of the
     installation process, reboot your system so that the
     new mouse drivers will be used.

     To remove the old MouseWare Windows software:

       DEL C:\WINDOWS\LMOUSE\*.*
       RD C:\WINDOWS\LMOUSE
       DEL C:\WINDOWS\SYSTEM\LMOUSE.DLL

     This example assumes the Windows directory is named
     "C:\WINDOWS."

     To remove the old MouseWare DOS files:

       DEL C:\MOUSE\CLICK.EXE
       DEL C:\MOUSE\LOGIMENU.COM
       DEL C:\MOUSE\*.MNU
       DEL C:\MOUSE\GOMENU.*
       DEL C:\MOUSE\MOUSE.COM
       DEL C:\MOUSE\MOUSE.SYS

     This examples assumes that the old MouseWare software
     is located in the C:\MOUSE directory.


2.3  How To Do a Network Install

     The retail version of MouseWare is meant for a single
     user only. The installation instructions for the
     network installable version of MouseWare are in
     NETWORK.WRI. To view this file, use Windows WRITE.EXE
     application.


2.4  Manually Decompressing Application Files

     Several files on the installation disk have been
     compressed. These files must be decompressed before you
     can use them. The INSTALL program automatically
     decompresses these files during installation. However,
     should the need arise, we have provided a method for
     you to manually decompress these files. Compressed
     files have file names that end with a percent sign (%).
     To decompress a file manually, use the LGEXPAND.EXE
     utility provided on the installation disk.

     For example, to decompress the file "WMOUSECC.EXE" to
     your hard disk, type:

       A:\lgexpand A:\WMOUSECC.EX% C:\MOUSE\WMOUSECC.EXE

     Please make sure that the destination directory
     (C:\MOUSE in this example) exists before you issue this
     command.


2.5  Installing the Mouse for DOSSHELL

     Load the DOS mouse driver prior to loading DOSShell in
     the AUTOEXEC.BAT file. Also, do not launch Windows from
     DOSSHELL, which may result in a loss of mouse
     functionality under Windows. Nor should you attempt to
     load the DOS mouse driver in a DOS box under Windows.


2.6  Installing MouseWare in Windows 95

     MouseWare 6.50 has been designed to be compatible with
     Windows 95, but if you notice any problems in the
     functionality of your mouse behavior, you should
     reinstall the Windows 95 Logitech mouse driver.

     To reinstall the Windows 95 Logitech mouse driver:

     1. Click on the Start button on the Windows 95 desktop
       and select Settings\Control Panel.
     2. Double-click the Mouse icon.
     3. Select the General page.
     4. Click on "Change".
     5. Click on "Show All Devices".
     6. Select Logitech.
     7. From the list, select the one that is suitable for
       your device, such as Logitech PS/2, Logitech Serial,
       or Logitech Bus.
     8. Click OK.
     9. OK to Restart the system to record your changes.

     If You Use Windows 95's Accessibility Tool, you must
     make a change to your keyboard settings. To do this
     follow these steps:

     1. From the Control Panel, double click on Keyboard
       icon.
     2. In Keyboard Properties window, click on General.
     3. Click on "Change".
     4. Click on "Show All Options".
     5. Select "Standard 101/102-Key or MS Natural Keyboard"
       option.
     6. Click Ok when prompted to restart the system.

     This will reinstall the standard Windows keyboard
     driver in SYSTEM.INI's [386Enh] section. This should
     eliminate any problems that you may have had under
     Windows 95 after installing MouseWare 6.50.

     We suggest that you do not assign tasks or commands to
     the right (secondary) mouse button in the MouseWare
     Control Center because Windows 95 uses this button to
     bring up the pop up menu which is a useful feature.

     The Windows 95 Mouse Control Panel can conflict with
     the Logitech MouseWare 6.50 Control Center. We
     therefore recommend that you use ONLY the Logitech
     MouseWare 6.50 Control Center. This Control Center can
     be launched from the Start Button, Logitech SenseWare
     Program Group.


3.   OS/2 Support

3.1  Installing to OS/2 2.1 and WARP 3.0

     OS/2 2.1 has three-button support for Logitech serial
     and PS/2 mouse, and two-button support for Logitech bus
     mouse. OS/2 2.1 should automatically detect and support
     the Logitech mouse connected to your system when OS/2
     is installed. If your Logitech mouse does not work
     properly after installing OS/2, you will have to
     manually select the proper Logitech mouse driver.
     Please follow these steps to correct the problem:

       1) Determine the type of mouse you own. If you have
          a PS/2 or bus mouse, skip down to step 2. If you
          have a Logitech serial mouse you need to know if
          it is M-series or C-Series. Look at the bottom of
          your mouse, if it says "CA", "CC", "CE" or "C7,"
          then you own a C-Series mouse, otherwise you own
          an M-Series mouse.
       2) Double click the OS/2 System icon.
       3) Double click the System Setup icon.
       4) Double click the Selective Install icon.
       5) Select the Mouse option and press Enter.
       6) If you are using a PS/2 or M-Series serial mouse
          you may select any of the following: "PS/2 [tm]
          Style Pointing Device", "Serial Pointing Device",
          "Logitech M-Series Mouse".
       7) Select the entry "Bus Style Mouse" if you have a
          bus mouse.
       8) If you have a Logitech C-series mouse and are
          running OS/2 version 2.1, select "Logitech [tm] C-
          Series Serial Mouse". If, you are running version
          2.0, choose "Logitech [tm] Mouse".


3.2  Win-OS/2 2.x Support

     In Win-OS/2 full screen mode, full functionality is
     available. To install MouseWare 6.50 under Win-OS/2, do
     the following:
       1) Double click the "Command Prompts" icon on the
          OS/2 desktop.
       2) Double click on the "Win-OS/2 full screen" icon.
       3) Run the "INSTALL" program from the MouseWare 6.50
          diskette.

     When running Windows applications from the OS/2 desktop
     the acceleration and speed sensitivity features will be
     disabled.

     Do not run Win-OS/2 from a DOS box while running
     MouseWare 6.50, your mouse will not function properly
     under these circumstances.


3.3  DOS Under OS/2 2.x

     MouseWare 6.50 DOS functionality will not be available
     in DOS under OS/2. Your mouse will be controlled by
     OS/2.


4.   Windows NT Support

     If your mouse is not working, try selecting the device
     driver as follows:.

     1. In the Program Manager, go to the MAIN group.
     2. Select WINDOWS NT SETUP.
     3. Select OPTIONS, Change System Settings.
     4. Click the down arrow next to the mouse selection and
       choose one of the following:

     If you have a Logitech serial mouse, select "Logitech
     Serial Mouse."
     If you have a Logitech PS/2 (Mouse Port) mouse, select
     "Logitech MousePort Mouse."
     If you have a Logitech Bus Mouse, select "Microsoft
     (green buttons) or Logitech Bus Mouse."

     Do not install MouseWare 6.50 in Windows NT. Use the
     Logitech mouse driver included in the Windows NT
     release. This driver has full support for all the
     Logitech pointing devices. To change the mouse
     settings, run the Windows NT control panel.


5.   DOS/WINDOWS DRIVER TECHNICAL NOTES

5.1  MOUSEDRV.INI Parameters

     See MOUSEDRV.TXT for more information on the mouse
     configuration file.


5.2  Loading the DOS Mouse Driver into High Memory

     It is recommended that you do not use "LOADHI" to load
     the DOS Mouse Driver, because the driver will optimize
     the use of available upper memory automatically and
     free up conventional memory.


5.3  Cloaking Feature

     Cloaking works in conjunction with a supported memory
     manager to enable the mouse driver to load in extended
     memory. Without cloaking, the DOS mouse driver consumes
     about 27k of conventional or upper memory. Working in
     conjunction with the cloaking interface, however, it
     uses a mere 1k of conventional or upper memory!  This
     1k size footprint is called the stub. The main part of
     the DOS Mouse driver will be loaded in extended memory.
     If the cloaking interface is present the DOS mouse
     driver program will automatically load in extended
     memory.

     Compatibility:

     CLOAKING.EXE will work with any of the following
     extended memory managers:

       EMM386.EXE                 Microsoft
       HIMEM.SYS                  Microsoft
       RM386.EXE 3.03 or later    Helix
       QEMM386.SYS 7.0            Quarterdeck
       386MAX.SYS 5.0             Qualitas

     You will need to be running one of these programs in
     order to use CLOAKING.EXE. The EMM386.EXE and HIMEM.SYS
     programs are included with DOS versions 5.0 and above,
     and with Windows.

     Installing Cloaking:

     MouseWare 6.50 automatically copies CLOAKING.EXE in the
     mouse directory. The installation program may also load
     CLOAKING in your AUTOEXEC.BAT file. This will occur if
     your DOS version is 6.0 or greater, you are running
     EMM386.EXE, and you are not already loading a version
     of CLOAKING.

     If you wish to run CLOAKING and the above conditions
     are not met, you will need to edit your CONFIG.SYS or
     AUTOEXEC.BAT file manually to include CLOAKING. If you
     wish to install CLOAKING in the CONFIG.SYS file, add
     the line "DEVICE=C:\MOUSE\CLOAKING" after the supported
     memory manager is loaded. In the AUTOEXEC.BAT file, add
     the line

     C:\MOUSE\CLOAKING.EXE    before the mouse driver is
     loaded.

     DOS Mouse Driver MOUSE.EXE Memory Management
     Parameters:

     By default, the DOS mouse driver will try to load the
     following in the order presented as high as possible in
     memory:
       1) Extended memory
       2) Upper memory
       3) Conventional memory

     By default, the stub will try to load the following in
     the order presented as high as possible in memory:
       1) Upper memory
       2) Conventional memory

     You can customize the DOS driver memory location by
     using the following command line parameters:

     /MEMSA    Loads the stub in upper memory
     /MEMSC    Loads the stub in conventional memory
     /MEMA     Loads the mouse driver in extended memory
     /MEMU     Loads the mouse driver in upper memory
     /MEMC     Loads the mouse driver in conventional memory

     Example

       C:\MOUSE\MOUSE /MEMU /MEMSC

     Note that if the driver cannot be loaded in the region
     specified, it will automatically attempt to load in the
     next lowest region of memory.

     Troubleshooting:

     If you experience difficulties with the Cloaking
     driver, your system might be incompatible with the
     current version of the Cloaking driver.

     To disable the Cloaking driver:

     If you run DOS 6.0 or above:

       1. Reboot your computer.
       2. During the reboot process press the F5 key to
          disable CONFIG.SYS and AUTOEXEC.BAT.
       3. Edit AUTOEXEC.BAT or CONFIG.SYS and remove the
          Cloaking driver line.

     If you run DOS 5.0 or under:

       1. Reboot your computer.
       2. During the reboot process press simultaneously
          the CTRL-SHIFT-ALT key. This action will prevent
          the Cloaking driver from loading.
       3. Edit AUTOEXEC.BAT or CONFIG.SYS and remove the
          Cloaking driver line.


6.   DOS/WINDOWS UTILITIES TECHNICAL NOTES

6.1  Smart Move Feature

     When Smart Move is enabled, the cursor automatically
     goes to the default push button when a dialog or
     message box appears. For some applications that use non-
     standard dialog boxes and/or non-standard buttons, this
     feature may not work all the time.

     If the dialog box does not have a default command
     button, Smart Move moves the cursor to the first button
     it finds. The cursor is not moved if it cannot find a
     button. If you prefer to have the cursor move to the
     center, or upper left corner of the dialog box if no
     button is found, use a text editor, like Notepad, and
     edit the file C:\MOUSE\MOUSECC.INI.

       [Button Assignments]
       MoveTo=Center
           or
       MoveTo=TopLeft

     To set it back to default, remove the "MoveTo=" line.


6.2  Changing the Keyboard Override

     The Keyboard Override for disabling the Windows
     shortcuts temporarily is the Control key. If you would
     like to change it to the Shift key, or set it to none,
     use a text editor, like Notepad, and edit the file
     C:\MOUSE\MOUSECC.INI.

       [Button Assignments]
       Disabler=Shift
           or
       Disabler=Off

     To reinstate the default, remove the "Disabler=" line.


7.   ADI DRIVER (DOS VERSION ONLY)

7.1  The AutoCAD Mouse Drivers (DOS ACAD Versions Only)

     MouseWare 6.50 includes two mouse drivers for use with
     AutoCAD. These drivers are called: DGLOGI.COM and
     DGLOGI.EXP. The first of these drivers, DGLOGI.COM, is
     a real mode driver for use with AutoCAD release 10. In
     order to use this driver read and follow the
     instructions in the section entitled: "Installing the
     AutoCAD Real Mode ADI Driver" below. The DGLOGI.EXP
     file is a protected mode driver and should be used with
     AutoCAD release 11 or greater. To use this driver,
     follow the use the installation instructions from the
     section entitled: "Installing the AutoCAD Protected
     Mode ADI Driver".

7.2  Installing the AutoCAD Real Mode ADI Driver (DOS Only)

     First copy the real mode driver to your hard disk (the
     installation program does not do this automatically).
     Follow the instructions below:

     Insert the Logitech MouseWare diskette into the A: or
     B: drive.

     Type A: or B: depending on which disk drive you are
     using.

     At the A: or B: prompt type: COPY DGLOGI.COM C:\MOUSE
     [Enter].

     Please note that the drive and directory may be
     different on your computer system.

     Next load this driver when you want to run AutoCAD by
     typing DGLOGI.COM from the mouse directory or by adding
     the line: "C:\MOUSE\DGLOGI.COM" to the AUTOEXEC.BAT
     file after the point where the DOS mouse driver is
     loaded. See the example below:

     C:\MOUSE\MOUSE.EXE
     C:\MOUSE\DGLOGI.COM

     While in AutoCAD, configure your digitizer to ADI
     digitizer or AutoDesk Device Interface (depending on
     your release), and select the default interrupt (0x79).

     You can set the ADI sensitivity by loading the Real
     Mode ADI driver as follows:

       DGLOGI Snnn

     where nnn is a number between 1 and 100. The default is
     50.

     To remove DGLOGI.COM from memory, type 'DGLOGI OUT' or
     'DGLOGI OFF'.


7.3  Installing the AutoCAD Protected Mode ADI Driver (DOS
     Only)

     AutoCAD release 11, 12, and 13 have a specific
     directory for protected mode drivers. Copy the
     DGLOGI.EXP file to this directory. Follow the
     instructions below:

     Insert the Logitech MouseWare diskette into the A: or
     B: drive.

     Type A: or B: depending on which disk drive you are
     using.

     At the A: or B: prompt type: COPY DGLOGI.EXP C:\MOUSE
     [Enter].

     Please note that the drive and directory may be
     different on your computer system.

     Next run the AutoCAD configuration utility and choose
     the Logitech Enhanced Mouse Driver ADI 4.2 V1.0 - by
     Logitech.


7.4  Using the ADI Driver

     The Logitech Real Mode ADI driver is compatible with
     all versions of AutoCAD, as well as other AutoDesk
     products such as AutoSketch, or AutoShade.

     The Logitech Protected Mode ADI driver is compatible
     with AutoCAD releases 11 or greater.

     Both the real and the protected mode ADI drivers
     require that you load the Logitech DOS mouse driver
     prior to using the ADI drivers. Both drivers combine
     keyboard shift states with mouse buttons to produce 16
     ADI button events for complex AutoCAD menu handling.
     This allows you to access common AutoCAD commands
     without taking your hands off the mouse. Please refer
     to your AutoCAD Reference Manual, under Button Menu
     section.

     These drivers also work with 2-button mice by
     simulating a middle button when you click both buttons
     at once.

     The Button Menu map is as follows:

        BUTTON COMBO              DEFAULTS
        --------------------------------------------------
        PICK = Left               Pick
        1 = Right                 Return
        2 = Middle                Menu (Cursor menu in
                                   ACAD11)

        3 = Ctrl + Left           Cancel
        4 = Ctrl + Right          Snap On/Snap Off
        5 = Ctrl + Middle         Ortho On/Ortho Off

        6 = Alt + Left            Grid On/Grid Off
        7 = Alt + Right           Coordinates
                                   On/Coordinates Off
        8 = Alt + Middle          ISO Plane Top/ ISO Plane
                                   Right/ ISO Plane Left

        9 = Ctrl + Alt + Left     Tablet Off
        10 = Ctrl + Alt + Right
        11 = Ctrl + Alt + Middle

        12 = Shift + Left
        13 = Shift + Right
        14 = Shift + Middle

        15 = Ctrl + Shift + Left


7.5  Programming The Buttons

     According to AutoDesk, the user cannot change the
     button defaults in AutoCAD Release 11.

     The mouse buttons CAN be changed within AutoCAD Release
     12 or greater. Changing the mouse buttons is documented
     in the AutoCAD Customization Manual. More information
     is available in the AutoCAD Interface, Installation,
     and Performance Guide, and in the AutoCAD Reference
     Manual.


8.   TROUBLESHOOTING

8.1  Installation Problems

     Before running INSTALL, please make sure you have at
     least 20 file handles in your CONFIG.SYS. Add this line
     to your CONFIG.SYS if not already present:

       FILES=20

     Should your system lock up at the end of the Windows
     installation, you may experience some difficulty trying
     to relaunch Windows.  If this should happen, perform
     the following steps:

       1)From DOS, enter the directory that you installed
          MouseWare to.  This directory is C:\MOUSE by
          default.

       2)Type the following command and press enter:

       POSTCOPY

       3)The installation is now complete.


8.2  Manual Installation (T.BAT)

     If you experience difficulty running the installation
     program, you may want to do a manual installation.
     Included on the MouseWare diskette is a program called
     T.BAT. This utility will EXPAND all the compressed
     files from the MouseWare disk to the drive and
     directory of your choice. To run T.BAT follow
     instructions below:

       1) Insert the MouseWare diskette into the floppy
          drive.
       2) Change your DOS prompt to match the floppy drive
          being used.
       3) At the A: prompt type:

          T A: C:\MOUSE [enter]

       4) Or at the B: prompt type:

          T B: C:\MOUSE [enter]

       5) Pressing any key will start the copy process.
       6) When the manual install is complete, you will
          need to edit the AUTOEXEC.BAT. Please add the
          following lines:

          SET LMOUSE=C:\MOUSE
          C:\MOUSE\MOUSE.EXE

       7) You will now need to edit the system.ini file
          located in the WINDOWS directory. Please change
          the following lines to read as below:

          [boot]
          mouse.drv=C:\MOUSE\LMOUSE.DRV

          [386Enh]
          mouse=C:\MOUSE\LVMD.386
          keyboard=C:\MOUSE\LVKD.386

       8) Now reboot the computer to make these changes
          take effect.
       9) To verify the DOS driver is loaded, change
          directories to C:\MOUSE and type the following
          command:

          MOUSECC [enter]

       Move the mouse to see of the cursor moves in the
       Logitech DOS Mouse Control Center

       10) Launch Windows to verify the mouse functions. To
          access the Logitech MouseWare Control Center open
          the Main Group, now double click on the CONTROL
          PANEL icon. You should now see the Logitech Mouse
          Icon. Double click this icon to open the MouseWare
          Control Center. You may now access the Button
          Assignments and the Cursor Enhancements.



8.3  Restoring Old AUTOEXEC.BAT, CONFIG.SYS, WIN.INI, and
     SYSTEM.INI

     The installation program saves these files starting
     with the .000 extension, and increments them to the
     next available numbered extension if it finds an
     existing file with the same name and extension.


8.4  Bus Mouse Conflict

     If you have a Bus Mouse with its jumper set on IRQ 2,
     you may experience compatibility problems when starting
     Windows. Some video boards (EGA, VGA) may use IRQ 2.
     The problem can be solved by changing the IRQ selection
     jumper on your Bus board to another interrupt not in
     use. Consult your video user's manual for more
     information.


8.5  Mouse Detection Problems

     Mouse connected to the Mouse Port (PS/2 port):

     If your mouse is connected to the mouse port and is not
     detected by the system, attempt the following step(s):

       1)Your mouse port might need to be enabled through
          the SETUP menu of your computer (please check with
          your computer documentation regarding the SETUP
          menu).

       2)If you have a mouse with both serial and mouse
          port adapters, connect it to the computer through
          the serial port. Reboot and check if the mouse is
          detected properly.

       3)If adapter(s) were not including in your package,
          your mouse was designed to work on only one type
          of port (Serial OR PS/2). Refer to your package
          for the type of port your mouse supports.

       4)If you must connect the mouse through the mouse
          port, add the following modifications to the
          C:\MOUSE\MOUSEDRV.INI file, reboot and check if
          the mouse is detected properly:

       [Technical]
       ForcePS2EquipmentFlag=On

     If the problem persists, please check for a possible
     computer BIOS ROM upgrade from your computer
     manufacturer. Some notebook systems such as IBM
     Thinkpad, have both an external Mouse Port and an
     integrated Pointing Stick which is connected to the
     Mouse Port. If your mouse is having difficulty running
     on the Mouse Port of this type of system, try using the
     serial port instead.

     Mouse connected to the Serial Port:

     If your mouse is connected to the serial port and is
     not detected by the system, add the following
     modification to the MOUSEDRV.INI file, reboot and check
     if the mouse is detected properly:

       [Technical]
       Timing=Hardware

     For more information on MOUSEDRV.INI, please refer to
     MOUSEDRV.TXT.


8.6  Renaming Installed Directory

     If you accidentally renamed your MOUSE directory
     without modifying the Windows INI files, it may cause
     Windows to not run at all, because it would not be able
     to find the Mouse Drivers. You should then run INSTALL
     from the MouseWare diskette, follow the instructions to
     re-install, and make sure you install the Windows
     Drivers.
     
8.7  Toshiba T3400 sub-notebooks and IBM ThinkPad

     Mouse connected to the mouse port (PS/2 port):
     
     If the "pointing device mode" parameter in the
     computer's setup is set to "simultaneous", an external
     mouse connected to the mouse port will be identified as
     a generic two-button mouse. If this external mouse has
     three buttons, the following modifications should be
     made to the MOUSEDRV.INI file:
     
          [PS2]
          NumberOfButtons=3
     
     The connected device model may also be specified. For
     more information on the MOUSEDRV.INI file, please refer
     to the MOUSEDRV.TXT file.
     

9.   APPLICATION DISK CONTENTS

9.1  Mouse Driver Files

     LMOUSE.DRV     Windows mouse driver (for Windows 3.1 or
                    greater)
     LVMD.386       Windows virtual mouse driver
     LVKD.386       Windows virtual keyboard driver

     MOUSE.EXE      Logitech DOS mouse driver

     DGLOGI.COM     Real Mode ADI v4.1 compliant driver
     DGLOGI.EXP     Protected Mode ADI v4.2 compliant driver


     MOUSEDRV.INI   Mouse driver configuration file
     MOUSEDRV.TXT   Text file documenting MOUSEDRV.INI and
                    MOUSE.EXE parameters.


9.2  Windows Program Files

     WMOUSECC.EXE   MouseWare Control Center
     WMCCDLG.DLL
     WMOUSECC.HLP   Mouse Help File

     WBUTTONS.EXE   MouseWare Control Center button engine
     WBUTTONS.DLL

     WCURSOR.EXE    Cursor Enhancement program
     WCURSOR.DLL


9.3  DOS Program Files

     MOUSECC.EXE    DOS Mouse Control Center

     COMCHECK.EXE   Tests the Connection of your serial
                    mouse

     CLOAKING.EXE   Memory enhancement utility


9.4  Installation Program Files

     INSTALL.EXE    Windows/DOS Installation Program
     INSTALL.INF
     NETWORK.WRI    Documents INSTALL.INF (use Windows'
                    WRITE.EXE to view)

     DINST.EXE      DOS Installation Program
     DINST.SCR
     DINST.CFG

     README.EXE     Readme File Viewer
     README.TXT     Readme File
     README.WRI     Readme File
