-----------------------------------------------------------
  HyperACCESS for OS/2 Version 6.0 Beta #3 README File
-----------------------------------------------------------

Contents
========
  o Disclaimer
  o Installation
  o Reporting Bugs
  o Known Bugs and Incomplete Features
  o Known Bugs under OS/2 2.1
  o Installed files

----------
Disclaimer
----------

Feel free to use and distribute this fully functional, free beta copy of 
HyperACCESS for OS/2. HyperACCESS for OS/2 is an exciting new program from 
the makers of the top-selling OS/2 communications program HyperACCESS/5, and 
HyperACCESS Lite in the BonusPak bundled with OS/2 Warp. We want you to see 
what's coming from us, and welcome your feedback! 

Though nearly complete, this beta still has some bugs. You can help us by 
reporting any problems you encounter that are not already listed later in 
this file. We will only respond if we need more information. As with any 
beta software, Hilgraeve assumes no risk of potential loss or damage to data 
arising from use of this beta software.

------------
Installation
------------

Follow these steps to install HyperACCESS for OS/2:

If you received HyperACCESS v6.0 as zipped files:

HyperACCESS v6.0 Beta #3 is provided as two zipped, named HAB3_D1.ZIP and 
HAB3_D2.ZIP, which are files containing the HyperACCESS installation files 
in a compressed format. You must have both files in order to install Hyper-
ACCESS. You will need to uncompress these files to generate the files 
necessary to install and run HyperACCESS.  Here's the procedure:

   NOTE: You will need the uncompression utility PKUNZIP.EXE version 1.01 
         or later to unzip these files. This utility is available on nearly
         all online services.

1. Open an OS/2 window, and change to the drive and/or directory containing
   the downloaded files.

2. Type PKUNZIP HAB3_D1 <destination>, and then press ENTER.  Replace 
   <destination> with the drive and/or directory where you want the 
   HyperACCESS files to be copied.  We recommend that the destination be a 
   floppy drive containing a blank, formatted 1.2M or 1.44M diskette.  That 
   way, you can use this diskette to install HyperACCESS on each of the PCs 
   that you use for testing HyperACCESS.

     Example:  PKUNZIP HAB3_D1 A:

3. Repeat step 2 for the file HAB3_D2.ZIP.  If uncompressing these files to 
   floppy disks, make sure that you label them as DISK1 and DISK2.

4. Once the installation files have been created continue with the steps
   below.

HyperACCESS Installation PHASE I
================================

1. Change to the drive/directory containing the HyperACCESS installation
   files.

2. Type SETUP.

3. Specify the directories for the Program and Data files. These may be the
   same location or different location depending on your preferences. Click OK
   to continue.

   NOTE: Program files may be installed to a directory that is set to read-only
         after installation and may be shared with other users. Data files must
         be in a writable directory and should not be shared.
   
4. Click Continue after reading the next status message. HyperACCESS's files 
   will be copied to the specified directories.

5. Change the floppy disk to disk #2 or specify the directory in which the 
   disk2 files are located when prompted. Click OK to continue.

6. Click Continue after reading the next status message to begin Phase II of
   the installation.

PHASE II
========

1. Enter all user information. Click Continue when finished.

2. Select the type of connection you will most often use. Click OK to 
   continue.

3. If you chose "Modem or Modem Pool" as your connection type, select an 
   appropriate modem from the selection list. Click OK to continue.

4. Select the interface to connect through. Then select the Com port you will 
   use most often. Click OK to continue.

5. If you chose "Modem or Modem Pool" as your connection type, select the 
   dialing method your phone system uses. Click OK to continue.

6. If you chose "Modem or Modem Pool" as your connection type, enter a 
   dialing prefix if your phone system requires one (such as '9' to
   get an outside line). Otherwise, leave this field blank. Click OK to
   continue.

7. Specify your default download and upload directories. If you leave these
   field blank, whichever directory is currently selected at the time of the
   transfer will be used. Click OK to continue.

8. Click OK after reading final status message.

9. Reboot machine so that changes made may take effect.

You are now ready to run HyperACCESS for OS/2.


--------------
Reporting Bugs
--------------

Please include the build number in all bug reports. The build number
may be found by selecting Help, then Product Information from any 
HyperACCESS panel. This will help us to identify which bugs are
associated with a particular build. It will also allow you to identify
if you have the most recent version of the software.

When you report bugs, please try to provide enough detail so that Hilgraeve 
will be able to reproduce the problem.  It is much more useful to hear "when I 
do this, then this, then this, the program misbehaves in this way," than to 
hear that something "doesn't work right." Keep in mind that too much 
information is much better than not enough.

Remember that we're looking for more than just bug reports; we also want to
know what you think.  So please give us your comments and opinions, and let us
know what additional features you would like to see in future versions.  We
would also love to receive a detailed account of how you use HyperACCESS in
your particular field of business.  We might even want to share your
experiences in articles, reviews, or advertisements (with your prior approval,
of course).

Hilgraeve's may be contacted through the following means:

     Compuserve ID:  71333,31
     INTERNET:custsupt@hilgraeve.com
     FAX: 313-243-0645
     BBS: 313-243-5915
     
We will not guarantee a respond. However, if more information is needed to 
reproduce or resolve a problem with the software we will contact you. Please 
do not report bugs by phone.

----------------------------------
Known Bugs and Incomplete Features
----------------------------------

The following is a list of incomplete features and known bugs in this beta 
release of HyperACCESS for OS/2. Please do not report bugs against these areas:

  o Help is not complete.
  o The conversion program doesn't handle HAWIN or HALITE files.
  o Older phonebook entries will have incorrect terminal colors.
  o HyperProtocol uploads to the Host only work if autostarted.
  o Running executables from a button may give an error since HAOS2 passes a
    named pipe handle to the program.
  o VT320 emulation not yet implemented.
  o Zmodem uploads to the Host are not autostarting.
  o Terminal dimensions (rows x columns) cannot be set.
  o The conversion program does not handle HAWIN files.
  o Crash recovery is not functional.
  o OS/2 shared modem port support cannot be set up during installation.
  o Entries will not run the script specified to run before connecting.

-------------------------
Known Bugs under OS/2 2.1
-------------------------

The following is a list of known bugs under OS/2 version 2.1 or version 
2.11. Please do not report bugs against these areas:

  o There are no check marks in the Phonebook's View menu.
  o If the Phonebook is in details view, the small icons are black.
  o HAOS2 will seg when Properties | Runtime Values is selected from the
    Terminal panel.
  o HAOS2 will seg when Transfer | Receive is selected from the Terminal
    panel.
  o HAOS2 will seg if the Modify Passwords button is selected from the
    Host's Terminal panel.
  o HAOS2 will seg if you select Options | External utilities from the 
    Phonebook.
  

---------------
Installed Files
---------------

Other than placing these files in the directories specified during 
installation, HyperACCESS makes one or two additional changes to your system.
It places an entry in your OS2.INI to specify the program and user
directories, and if you elected to have Setup modify your CONFIG.SYS file,
the HyperACCESS program directory is added to the LIBPATH and HELP statements
within that file.

Installation files
==================
HAUNINST.CMD    Uninstall script
HAUNDIR.CMD     Uninstall script
SETUP.EXE       Setup utility
SETUP.INS       Setup utility script
~INS0762.LIB    Setup support file
INSTALL.CFG	    Installation config file
HAREADME.ICO    Readme icon
NPFOLD1.ICO     HyperACCESS folder icon
NPFOLD2.ICO     HyperACCESS folder icon
HAUNINST.ICO    Uninstall icon
INSTALL.LOG	    Installation log file

Phonebook entry files
=====================
ATTMAIL.HAO     AT&T Mail phonebook entry
DIRECT.HAO      Direct Connect phonebook entry
DELPHI.HAO      Delphi phonebook entry
INTERNET.HAO    Internet phonebook entry
DOWJONES.HAO    Dow Jones phonebook entry
GENERIC.HAO	    Generic BBS phonebook entry
GENIE.HAO       Genie phonebook entry
HILGRAEV.HAO    Hilgraeve BBS phonebook entry
BIX.HAO         Bix phonebook entry
MCIMAIL.HAO     MCI Mail phonebook entry
NEWSNET.HAO     NewsNet phonebook entry
IBM.HAO         IBM support BBS phonebook entry
HAHOST.HAO      HyperACCESS Host phonebook entry
COMPUSER.HAO    Compuserve phonebook entry
SIO.HAO         SIO Support BBS phonebook entry
SPLIT.HAO       National Time Server phonebook entry
OS2SHARE.HAO    OS/2 Shareware BBS phonebook entry
FEDWORLD.HAO    FedWorld BBS phonebook entry
DEFAULT.HAO     New phonebook entry template

Program files
=============
HAOS2.EXE       HyperACCESS program file
HAVIEW.EXE      HyperViewer program file
CONVERT.EXE     HyperACCESS conversion program
TDLL.DLL        HyperACCESS support DLL

Connection support files
========================
MODEMS.BIN      Modem support file
USERMDM.TXT	    User definable modems
HA2C_STD.DLL    Std. com. driver
HA2C_TCP.DLL	 TCP/IP com. driver
HA2X_STD.DLL	 Std. connection driver
HA2X_DIR.DLL    Direct connection driver
HA2X_TCP.DLL	 TCP/IP connection driver
HA2C_SHR.DLL    OS/2 shared port com. driver

Help files
==========
HACCESS.HLP     HyperACCESS help file
GBMV2.HLP       HyperViewer help file
GBMDLG.HLP      HyperViewer help file

Miscellaneous files
===================
RESETINI.EXE    Resets HA.INI file
HA_AUTO.H       Include header file
HA_AUTO.LIB     Scripting library file
HA_AUTO.DLL     Scripting support file
HA.INI          HyperACCESS initialization file
DEFAULT.LOG     Default log file
WELCOME.TXT	    Host welcome text file
DEFAULT.LOG	    Default call log file
PCW2EXP.WAS     Procomm/Win v2 export script
PCWEXP.WAS      Procomm/Win export script

Sound files
===========
HARP.WAV			 Harp sound
DOORCLS.WAV		 Door closing sound
BABY1.WAV       Baby crying sound
HORN.WAV        Horn sound
PARTHORN.WAV	 Horn sound
PHONERNG.WAV	 Phone ringing sound
HALLELUJ.WAV	 Singing hallejulah sound
DOOR.WAV        Door opening sound
DRUMROLL.WAV	 Drum roll sound
BUZZER.WAV		 Buzzer sound
CUCKOO.WAV		 Cuckoo sound

Script files
============
HALOGON.EXE		 Logon for Hilgraeve BBS
SET_TIME.EXE    Sets system time according to National Time Server
ATTMAIL.CMD		 Logon for AT&T Mail
GENIE.CMD		 Logon for Genie
DELPHI.CMD		 Logon for Delphi
MCI.CMD			 Logon for MCI Mail
DOWJONES.CMD	 Logon for Dow Jones
CIS.CMD			 Logon for Compuserve
BIX.CMD			 Logon for BIX
SIO.CMD			 Logon for SIO Support BBS
FEDWORLD.CMD    Logon for FedWorld BBS

List files
==========
OS2.BBS     	 A list of OS2 BBS's (International)
SBIQ.LST         A list of BBS's on the Internet
USBBS113.LST     A list of BBS's (US only)
