   Workstation for DOS ODI Client

   NetWare* DOS ODI Client Driver Installation Notes for Intel's 
   EtherExpress(TM) PRO/10 LAN Adapter
   =============================================================

   Location of Driver:     \NWCLIENT\EPROODI.COM 
 
   Quick Installation
   ------------------
      Use the Auto Installation option in the SoftSet2 program.  For 
      workstations that will use VLMs, see VLM Client section below.


   Sample Configuration Files
   --------------------------
      AUTOEXEC.BAT:
         LSL
         EPROODI
         IPXODI
         NETX or VLM (VLM's for NetWare 4.x or 3.12)

      NET.CFG (for 802.3 clients - generally NetWare 3.11 servers)
         LINK DRIVER EPROODI
            PORT 300
            FRAME ETHERNET_802.3

      NET.CFG (for 802.2 clients - generally NetWare 3.12 and 4.0x servers)
         LINK DRIVER EPROODI
            PORT 300
            FRAME ETHERNET_802.2
                

   General Installation for NetWare 2.2/3.11/3.12 client
   -----------------------------------------------------
      1. All the files necessary to connect to the NetWare servers, are 
         supplied on Intel's driver disk.  If there are updates to the 
         shell files, they are available from Novell on NetWire in the 
         DOSUPx.EXE file.  Through CompuServe access it by typing:
         GO NOVFILES.

         From the \NWCLIENT directory on the driver disk, copy LSL.COM, 
         EPROODI.COM, IPXODI.COM, NETX.EXE, NET.CFG.

         If you are also running Windows* for Workgroups, please see the 
         Hints and Tips section below for other important information.
  
      2. Create a batch file, or add to your AUTOEXEC.BAT file the commands    
         listed above under AUTOEXEC.BAT
  
      3. Edit the NET.CFG file that you copied over.  Edit the file per your 
         requirements (see examples above).  If there are two frame types 
         listed, whichever frame type is listed first, that is the one that 
         the driver will load.  Also, you may need to change the port number 
         to the one your card is using.  See above for examples.
  
         The NET.CFG file should be in the same directory as the adapter
         driver and you should be in that directory when you execute EPROODI.
  
         When you finish editing the NET.CFG file, reboot the computer and
         watch for the driver's logon message.
  
  
   General Installation for NetWare 4.01/3.12 client with VLMs
   -----------------------------------------------------------
      The installation of the NetWare 4.0 client software is much easier
      than earlier versions.  The installation procedure will transfer
      files to a specific directory on the workstation and create or modify
      existing configuration files to fit your specific needs.  The
      installation utility INSTALL.EXE is located on NetWare's "Workstation
      for DOS" disk.  The INSTALL.EXE program is also installed on the 4.0x 
      server, so one could do the SoftSet2 quick installation and connect 
      with NETX to run the install.  The install program is located in 
      \PUBLIC\CLIENT\DOSWIN directory on the server.  NetWare 3.12 does not 
      automatically create this directory on the server during installation.
  
   Installation Procedure
   ----------------------
      Run INSTALL.EXE from the Workstation for DOS Disk.

      The NetWare Client Install program screen will appear.  You must
      complete each of the questions.  These options are specific to your
      needs.

      1. Step #1 specifies the directory on the hard drive that you want to    
         install the client software.  The default directory is C:\NWCLIENT.  
         You can specify another directory if you desire.

      2. Step #2 gives you the option to automatically update the CONFIG.SYS 
         and the AUTOEXEC.BAT files or modify them at a later time manually.

      3. Step #3 will install Windows software for your system if your 
         workstation supports Windows, and will ask you to specify the 
         directory which Windows is located.

      4. Step #4 asks you to select a network driver and provide 
         configuration options.  It uses the specifications you select to 
         create the file NET.CFG.  Insert the EtherExpress PRO/10 disk when 
         prompted for the driver disk. Intel EtherExpress PRO is the name
         of the driver. Once you have chosen the driver, verify the  
         configuration settings for the board if necessary.
         
      5. Step #5 is the final step and the install program will copy the 
         appropriate files to your harddrive.

      NOTE: Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the 
            network mappings to work properly.


   Hints and Tips
   --------------

      1. NET.CFG Options:
         PORT - This is the base I/O address of the adapter.  Verify 
         setting in SoftSet2.  

         INT - The system IRQ for the adapter to use.  This option is only 
         used as a reminder for which IRQ the board is set for.  It does not 
         cause the driver to override the EPROM contents.  The EtherExpress 
         PRO adapters support IRQ's 2, 3, 5, 10, 11. 

         NODE ADDRESS - This is the ethernet node address for the adapter.  
         Syntax: NODE ADDRESS 00AA00123456
         where 00AA00123456 is the adapter's ethernet address .  This is 
         optional.  If it is not present, the driver will use the value in 
         the  EPROM on the adapter.  If it is present the driver will use 
         this value even if it differs from the EPROM contents.  This is 
         Novell's node address override feature.  To comply with Novell's 
         multicast specification, the second digit of the overriding 
         address should be a 2, 6, A or E. 
         
      2. Windows for Workgroups 
         To install proper driver support for Windows for Workgroups and 
         Novell NetWare on the same workstation, follow these steps:
         
         1. Set up the workstation with the DOS ODI client driver as shown
            above.
         
         2. Load the ODI driver and login to your NetWare server.
         
         3. Start Windows for Workgroups and set up the driver for the
            EtherExpress PRO adapter by following the instructions shown in 
            the Windows for Workgroups installation document.  When the 
            driver is chosen, Windows for Workgroups will detect the ODI 
            driver is already loaded and automatically install the 
            appropriate support.



   * Third-party trademarks are the property of their respective owners
